Satellite Pro 6000 and Windows Vista

Similar Questions

• Satellite Pro 6000 and SD-R6472 DVD burner

  In response to my previous posting (now locked), the engraver of the SD-R6472 DVD can be used with Satellite Pro 6000.

  Firstly used the dreaded IDE 1 # error will be encountered, but not panic, this can be overcome by asking the Technical Support CSEL-Changer Toshiba Software and this will change the master/slave setting of the drive.
  After that, everything works fine.

  Hello

  Thanks for the useful information.
  I'm sure that this information will help other users who have similar problems.

  Good bye

• No sound on Satellite Pro A120 with Windows Vista

  Hello

  I had to reinstall the Vista operating system and rebuild my Satellite Pro A120 from the revovery disk.
  Most of the things are fine, but I can't any sound to speakers of jack headphine.

  I checked said etil Realtek High Definition Sound Driver is installed and working properly.

  My volume buttons are up on the mixer and Windows Media Player.
  The driver is Realtek 6.0.1.5317

  Help would be appreciatesd

  Hello

  Please take a look here:

  + Audio cut off (no sound) after you install Windows Vista +.
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  There is a tool that allows the sound again once it seems s Cup...

  Welcome them

• Satellite Pro L10 and Windows 7 drivers

  Hi guys,.

  I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
  XP drivers do not work.
  If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

  I look forward to your responses.

  Thanks in advance for your responces
  Panos

  Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
  According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

• Satellite Pro L670 and windows XP

  I just bought a new laptop and windows xp installed. After the installation of other programs and then turn off the computer, it will turn back not again. A blue error message screen appears, but I can't read because it flashes and turns off the screen too fast. Sinks in a loop where Windows starts, a screen pops up that says that windows did not start and gives me several options such as "restart windows safely" or "restart windows using a previous configuration." No matter which option to choose, it is up to the Blue error message screen and then back to the screen telling me to select an option.

  I tried to reinstall Windows XP with original Toshiba drive. He has worked for three days and then the same problems occurred again. The last thing I did before I turned it off was to install a plug-in from Adobe. I installed it again this morning and I fear that this loop of error will happen again. I don't know why this is happening and I want to prevent it from happening again in the future.

  I also put t know why this happen, but let us first clarify some basic stuff.

  What model of laptop you have exactly (L670-xxx)?
  Do you have original Windows XP Home edition recovery disk with your laptop?
  You have changes to the SATA settings in the BIOS?

  If please enter the BIOS and set it to default settings. After doing this OS install again by using the original Windows XP Home edition if you guessed it with your laptop.

• Satellite Pro P300-135/Windows Vista / problem with microphone and Crystal

  Hello

  Can someone help me please? I reinstalled my Vista and my microphone does not work. When I try to plug in my headphones, they are also dead. Nobody knows what kind of drivers can be responsible for this?

  And how you try reinstalling Vista? Using the recovery image (factory settings) or you try to install the clean version of Vista?

  Sorry, but I don't see any sense why you are doing this. Your laptop comes with Vista. Is there a particular reason to achieve?

• Satellite Pro A210 HDD, Windows Vista & BIOS problem

  Hello

  We have an A210-1 b 3 - PSAFHE-01500PEN - running Vista which has had a hard drive failure.
  We have replaced the old drive SATA (250 GB) with a 500 GB SATA drive and used the recovery disc to install Vista and specific software from Toshiba. We intend to restore our backup data that a Vista is installed.

  That is the problem. We have installed the new hard drive, ran the recovery and after restarting, we got a Windows could not sating error set up the hardware and then restarts. I suspect that the new drive is not recognized by Vista. I looked around and it was suggested to the SATA Compatible parameter value in the BIOS. However, the BIOS (V1.5) has no options for this.

  So, can anyone suggest anything please? Any ideas where I can get the latest update of BIOS (pref one that allows me to create a boot disk and update BACK)? Any help appreciated because she has completely baffled me.

  Thank you in advance,

  Jamie

  Hello

  Seems that A210 BIOS does not support the SATA option, that would help you to switch the AHCI compatible mode. That is why the SATA drivers must be included in the configuration of OS install.

  But if you use the Toshiba drive recover then you n t need to install the SATA drivers from the Toshiba drive recover contains the image where the SATA drivers are already included.

  Now the question is why the Vista Setup program cannot complete.
  Have you used the good drive recovery for the right portable model.
  I read in a number of threads that people used bad disc

  Well, it would be interesting to know if you can install the Windows operating system using the disk from Microsoft. On the other hand, you can try to format the HARD drive before launching the recovery disk

• Satellite Pro A200 and Windows XP 64-bit possible?

  I am the owner of this laptop & I wonder if it is compatible with Windows XP 64-bit.

  I work with 3dsmax which does not work on Vista (32 or 64 bit).
  Y at - it problems with the drivers & where I can find drivers for 64-bit Windows XP?
  See you soon

  Toshiba does not 64-bit drivers for Windows XP.

  So you must search on external Web sites for the drivers but I could only you n t get all the drivers. To be honest if you don t use 4 GB of RAM or more in this laptop Windows XP are the best choice.

  Here are some examples where you can search for drivers:
  [www.intel.com]
  [www.realtek.com]
  [http://aps2.toshiba-tro.de/bluetooth/]
  [http://aps2.toshiba-tro.de/wlan/]

• View fragile on Satellite Pro 6000

  Hi, I recently had to format my laptop: Toshiba Satellite Pro 6000 and model the screen is fragile.

  Please how can I get the right driver, I checked the net but without success.
  Thank you

  All the drivers, you can find on Toshiba download page http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.
  All that s!

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

• Satellite Pro 6000: Windows XP installation problem

  Win98SE works well on my Satellite Pro 6000. I put XP on it.
  During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

  Save mode then also does not work, I can't see anything.
  What I've done wrong? It seems that the video driver is missing?
  With the recovery cd is everything works again. (win98se)

  Someone at - it solution to put XP on this laptop?
  Gr. R.

  Hello

  In my opinion, there should be no problem with the use of Windows XP on this unit.
  As far as I know the laptop came with WinXp pro, W2k and Win98SE.
  In this case, all required drivers are available and must be installed in the correct order.
  I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

• How to remove the old fan and heatsink of the Satellite Pro 6000

  Hey people,

  Is there anyone who can help me with instructions step by step to remove the fan and the heatsink, I have a Toshiba Satellite Pro 6000...

  Concerning

  Barnie

  Try this guide shown here:
  http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

  The 6100 is almost the same as the 6000. This guide should be a big help. (Click on each image for a more detailed view).

  Kind regards

  chain

• Satellite A300 - Help Support and Windows Vista does not work

  Hello

  I have a Satellite A300 that had Windows Vista Home Basic pre-installed.
  When I click on the Windows Vista Help and support help windows appear, but an error message box pops up that says page Web is no longer valid.
  The Help window opens blank with the mode circle cursor.

  How should I do?
  Thank you.

  When you open help and Support your laptop is connected to the Internet?
  If this is not the case, try to open it with an Internet connection.

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

• The maximum size of HDD for Satellite Pro 6000?

  Hi, I am trying to install a 60 GB hard drive, but it is shaped, and it stops at the instalation of Windows XP Pro.

  Is there a size limit of HD?

  Thank you
  Ronaldo

  Hello

  It stops without any error message? If this isn't the case, then try another copy of Windows XP since the Satellite Pro 6000 shouldn´t have problems with this drive. I had 2 years a similar machine and I also got a 60 GB Toshiba HARD drive installed. It worked like a charm, so I can't imagine that the hard drive could be the problem.

  See you soon