Satellite Pro 6000: error LED message - what does this mean?
Hello
I have gad an old Toshiba Satellite Pro 6000. Sometimes, not after a period, he died. I have gad error code because the DC IN Red flashes orange. The blink rate is 1 x 3 long short 1 x length 2 x 1 short long = 10001001 in bin = 91 h (is this true?)
Now 91 h ist the following error: 1R5 - E1V voltage is not more than 1.275V when the computer is turned on. But what the hell of this error means? What is 1R5 - E1V?
Need help. Greetz
Hello
Read the code back!
10001001 = 1001 0001 = 91 H
http://www.prepressure.com/library/BinHex.htm
I think there is something wrong with the electronics of the Board of Directors.
Therefore, you will need to contact the ASP from Toshiba for help.
Tags: Toshiba
Similar Questions
-
error code: 214750037 what does this mean and how do I? in the game adera
I was downloading DLC to adera and it downloads fine, but when it installs it said error of mapping content an unexpected error occurred during content acquisition. Please refer to the error code: 214750037 what does this mean and how do I?
I have the same problem with the second episode of the Adera. No change to my Surface either I have no antivirus running on this unit I just got this Friday.
-
When I connected to adobe photoshop for the first time with my adobe ID and password on my lap top, it couldn't connect and gave me "error 400". What does that mean?
Hello
Please visit Adobe Creative Cloud connection errors
Hope that helps!
Kind regards
Sheena
-
SHARED-UNKNOWN-ERROR: 22-What does this mean? can not post the site that this error when I try.
Hello
Please sign of Muse and identify yourself again and try to publish.
You have the option of disconnecting help > Sign Out
In the case that do not fix the issue made me know.
Concerning
Vivek
-
my pc is hp compaq dc 7800 small form factor.
I installed win vista Business 64-bit
After installition, I get this message
"Your version of Intel Active Management Technology is not compatible with this version of Windows."
What does this mean?
Thank you
Hello
I suggest you send the question in this forum and check if it helps;
http://social.technet.Microsoft.com/forums/en-us/itprovistasetup
It will be useful.
-
I get an xbox 004500 No. service error code. What does that mean? I can not play
What does that mean? I can not play
Hello
The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
If you need to contact them.XBox - Support
http://support.Xbox.com/en-us/pages/default.aspxXBox - Contact us (support)
http://support.Xbox.com/en-us/contact-usXBox - Support Forums - and my XBox (top-right)
http://forums.Xbox.com/Xbox technical support phone number
- Toll-free: (800) 4MY-XBOX or (800) 469-9269
Opening hours: 600 PM 2200 h / Pacific / daily
International (direct line in the U.S.): 425-635-7180
XBox LIVE - Service status
http://support.Xbox.com/en-us/Xbox-Live-statusManage the XBox Live account
http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-managementXBox Live Sign-in problems
http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-inI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
original title: connection to the VPN
While trying to connect to the VPN Windows, I get an error 868. What it means. The address of the server I used was 68.28.195.137. Help, please.
Vijay Kapnadak
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro
-
I connect to an access provider via Airport Extreme, which is extended through two Airport Express. When I try to edit anything in one of these devices, even a name, I get this message: "you have entered the address of the router is not compatible with your WAN IP address. My connection seems to work, but there is clearly something wrong with her. The Express has no DNS and will not update without the same message. I have no idea what this is all about and will greatly appreciate the ideas.
This means that WAN Setup does not or does not install across the network.
The best way to solve this problem is beginning on...
Reset all three at the factory and reconfigure each in turn. Do the extreme first and make sure it works... Then add the express.
If you need help with that we will need to know which modem or modem router to your ISP gave you and possibly the type of services to wide band... and who is the provider.
Give us screenshots of each installer as you do.
-
When downliading updates 1 pop with a 670 error code what does this mean
When the download of updates 3 of 4 downloaded but the last one appears with a 670 error code, what it means?
Hello
I suggest you try to execute this fixit and see if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesAlso, try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
-
Windows 7 error "code 10" what does that mean?
My drive "D." [reading / writing cd/dvd] while it is running, i.e. drawer opens / closes, can hear it check disk. But the computer does not recognize [D: drive disappeared]. Mgr. device says "this device cannot start (code 10)". Windows trouble shooting says "could not identify the problem.
Help!
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Creative cloud update, I get an error code 50 - what does this error code means?
Download and install an upgrade to creative cloud, I get an error code 50. I look for a list of error codes with no luck. Can someone tell me what this error code means and what is the solution? Thanks in advance.
Error 50 https://forums.adobe.com/thread/1432237 can help
-
My sound is distorted when coming, such as Skype, its OK at the other end. It looks like not running too fast (a bit like the chipmonks. Also, I don't hear anything when I try to play a CD sample in the music file that came with the computer. Help
Hi carolejenkins,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. what happens when you try to read examples of music files on the computer?
4. are you able to play the other music files on the computer?
5. what player you use to play music files?
6. What is the finished message, you receive the recognition of the word on the computer?
7. do the sound distort occur only with the Skype program?
Method 1
If it helps, try the step below and check out them.
(a) open Sound by clicking on the Start button and then clicking on Control Panel, click sound.
(b) on the playback tab, click speakers, and then click Properties.
(c) click the enhancements tab, and then select the checkbox disable all improvements .
Method 2
If the previous step fails, then I suggest that you manually download and install the drivers for card its updated on the computer by visiting the manufacturer of the computer or sound card manufacturer's Web site and check if it helps.
How to manage devices in Windows XP
-
What does this mean please?
This upcoming memory upward in Microsoft Outlook - I can receive emails but not receive them-your server unexpectedly terminated the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Object ' read: first game of o/30 (and first draw FRO 4 turns)', account: 'mail.inet.com.au', server: 'mail.westnet.com.au', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10053, error number: 0x800CCC0F
My computer is always online and the bond is strong, so I am contfused why it cannot connect.
Is this a problem suddenly, new or...?
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htmSee If disabling email scanning by your antivirus application solves the problem. E-mail Scanner don't offer no extra and Symantec protection even says that it is not necessary:
Disable e-mail analysis won't let you without protection against viruses that are distributed as attachments to email. Norton AntiVirus Auto-Protect scans incoming files as they are saved on your hard drive, email and attachments to emails. Scan to email is just another layer on top of that. To make sure that Auto-Protect provides maximum protection, keep active Auto-Protect and run LiveUpdate regularly to ensure that you have the most recent virus definitions.
http://Service1.Symantec.com/support/NAV.nsf/docid/2002111812533106==================================================
Troubleshooting error messages that you receive when you use OE and OL
http://support.Microsoft.com/kb/813514 -
During the update process, I get this message:
WARNING: After completing the load operation, you must enable your wireless device to send and receive messages and use other services of BlackBerry. If you do not want to continue with this load operation, press Cancel.
What he means by "activate your wireless device? I'm paranoid about "bricking" the darn thing!
Thanks in advance...
Hello
I have Goggled just a couple of the other forums, it's just what thought us it was, Just means that you will
Re - turn on the radio.
Thank you
Bifocals
-
I see two '2' parameter and "scene 3". what it means?
gotoAndPlay (2, "stage 3");
movieClip_5.addEventListener (MouseEvent.CLICK, fl_ClickToGoToScene_3);
function fl_ClickToGoToScene_3(event:MouseEvent):void
{
MovieClip (this.root), .gotoAndPlay (2, "stage 3");
}
It displays error
ArgumentError: Error #2108: stage stage 3 was not found.
at flash.display::MovieClip/gotoAndPlay()
at Untitled_fla::Symbol2_2/fl_ClickToGoToScene()
can specify you
Fortunately, I myself do what is the scene. Just go to Insert menu. and click on stage. Now you're gone second stage. the link describe scene much
Maybe you are looking for
-
Satellite Pro 6100 - is to "restore" a re - recovery CD install?
Hello My Satellite pro 6100 won't start. "Starting process crashes and a message appears saying that the \windows\system32\config\system file:-«' is missing or damaged.When I ran the product recovery DVD, he asked me to confirm what operating system,
-
Remove the massive folders in bookmarks
Ineed to remove approximately 400 folders of bookmarks and I can not figure out how to highlight or select the folders I want mass. Help, please
-
How do I know if my iPod is a uk version?
I have a 30 gb iPod 5th generation u2 how to know if it is a UK version?
-
Please be careful! Another phone sold on Aliexpress as authentic! Announced as Lenovo a806W OctaCore 4 g. It is NOT the case. Check CPU ID online transmissions! Its actually dual core (and obviously NOT an original Lenovo phone!) We inform you concer
-
ACS Web Interface 5.1 does not
We have a Cisco Access Control Server (TACACS+ version 5.1) with an additional 2 port NIC card. This produces 4 ports on the ACS server(G0 through G3). After initial setup of the ACS server with an IP address on G0, I connected a Windows 7 server wit