Satellite Pro 6000 lost DVD/CD Rom drive after upgrade to win 2000 sp4

Similar Questions

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• What are Satellite Pro 6000-compatible DVD - RW drives

  Hello

  Can someone tell me which dvd rw is compatible with the satellite pro 6000?

  Hello

  It is always difficult to find information on compatible drives due to different master / slave and c - salt settings.
  In my knowledge don Toshiba user manuals t provide such information. OK, I put t know if all don t user manual provide this, but I've found this info in my user manual.

  However. I studied a little someone suggested that the Toshiba SD-R6372 dvd recorder is compatible with Satellite Pro 6000/6100 units.
  I found this on a very popular online auctioneers ;)

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• Satellite Pro 2100: card network wireless not recognized after upgrade

  I have a Satellite Pro 2100 ad I used successfully a PCIMCIA 802. 11b card wifi for two years.

  Studying the manual, I discovered that the notebook is "wifi ready" (it has a wifi switch, a switch wifi of Alt - F8, and a section of the manual).

  I opened a Bay and found out a mini-pci slot. That's why I bought an Intel 2200 BG wireless adapter and I put it inside, which connects the sons of two antennas, located in the Bay. Finally, I was ready to son mask 11 and 13, as suggested in many forums. But when I put the card inside, unknown electrically. It seems that the mini-pci slot must be Electric.toutes impossible. My Bios is not impossible, but it.

  In another Bay close to the mini-pci card, I discovered an empty shell for a chip. Is this an impossible chip?

  Hello

  As far as I know that this unit is about 4 years old and at that time the unit is tested with the wireless network card with the PA3212U-1MPC part number. This map has been tested, is also compatible and can be used.

  I put t know what is going on exactly in your case, but new material should be recognized and the driver must be installed. I put t know what you mean exactly, but can you please explain exactly the situation?

  The card is correctly recognized and installed in the Device Manager?
  You can use FN + F8 key combination to activate the wireless card?

• Satellite Pro A200 - CD/DVD question - D:\ drive is not accessible

  Hello

  No one knows what may be the cause of this problem - when I put a disc into my laptop to install the new sotware - I see the following error message:

  "D:\ is not accessible."

  The request could not be performed because of an i/o error. "

  Thank you

  Kristian

  I can provide a possible solution that has worked for many others:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart your machine and windows will install the drive again. Check if it worked for you.

• CD/DVD does not work after upgrade to win 8 on Satellite L750

  Hello

  After the upgrade of my Satellite L750 to Windows 8 I can't access my CD/DVD-unit more (not valid invalid error 19 code or registry entry is not complete). Same error when I connect my USB BD-burner.

  Who can help?

  Frank

  Hello

  Start Registry (regedit in the search), and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Class {4D36E965-E325-11CE-BFC1-08002BE10318

  After this reboot of the laptop

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• (Redirected) Has no Blue Tooth driver after upgrade to Win 10

  Here the device for the Atheros Driver Manager.

  This device cannot start. (Code 10)

  STATUS_DEVICE_POWER_FAILURE
  QUALCOMM Atheros close BluetTooth driver

  Qualcomm-Atheros UART Transport blue tooth driver for Intel series IO Host 63 9 windows 10 controller

  What is the reason and what is the remedy?

  Assistance is necessary New pilot does not seem to be available from today ' today...

  N0orm Radio

  Hi N0ormradio,

  Please repost this in the forum software and operating system for Windows 10 for assistance.

  http://en.community.Dell.com/support-forums/software-OS/f/4997

• Satellite L500-14 X - battery does not load after upgrading to Win 8

  Hello

  after upgrating my laptop to win 8 battery continues to charge...
  the message says... "pluged but no current charging"...

  Any suggestions... except to reinstall win7...?

  Hello

  Usually, there is not much difference between Win 7 and Win 8 so I really put t understand why this battery issue must be linked to Win 8.
  In my opinion this isn't win 8 problem and I think that even if you install Win 7, this question is would not solve

  Try this:
  Disconnect the power adapter and remove the battery
  Now let the laptop disconnected for a longer period of time (10 hours)
  Then hold power button / stop along 30 sec and bring the two parties together.
  The adapter must be connected for a while to allow the ERP system the battery

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• DVD burner for Satellite Pro 6000?

  I have a lite - on dvd slimline burner we don't work in the sp6000
  now, I want to know Witch one does not work in a satellite pro 6000?

  (DVD burner or a combination dvd/CD-RW)

  As far as I know that no engraver of DVD or combo for Satellite Pro 6000 driver is available. Download and review the Satellite Pro 6000 user manual. There are readers who must be compatible.
  I found these:
  Reader of DVD - ROM SD-C2502
  -Player CD-R/RW UJDA340
  -Drive CD-RW/DVD-ROM UJDA720
  -Drive CD-RW/DVD-ROM SD-R2102
  Reader of DVD - ROM GDR-8081

  But if you want to be 100% sure, you can contact the ASP in your country. There also order you the discs

• Satellite Pro 6000: video controller - driver compatible vga

  Hello

  I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
  That's probably because my video controller is not installed, but I can't find a
  Driver video controller for a 6000 SP. My OS is XP.
  Can someone help me?
  Thank you

  Hello

  You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Choose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP

  By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!

• Satellite Pro 6000 and SD-R6472 DVD burner

  In response to my previous posting (now locked), the engraver of the SD-R6472 DVD can be used with Satellite Pro 6000.

  Firstly used the dreaded IDE 1 # error will be encountered, but not panic, this can be overcome by asking the Technical Support CSEL-Changer Toshiba Software and this will change the master/slave setting of the drive.
  After that, everything works fine.

  Hello

  Thanks for the useful information.
  I'm sure that this information will help other users who have similar problems.

  Good bye

• Satellite Pro 6000: Base system device driver for XP

  Hello

  I want to install the:
  M - systems diskonchip 2000

  and the:

  Base system device

  On my Satellite Pro 6000 (XP).

  Does anyone know what I need to install drivers?

  Hello JR

  Did you install chipset driver?

  On this page of European driver for Toshiba-> * Archives *!

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp