Satellite Pro 6000 - new RAM does not work

Hi all

New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
Any help would be thank Lindsey

I think that the new RAM is not compatible with the motherboard or laptop.

The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

Tags: Toshiba

Similar Questions

  • Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

    I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

    Hello

    All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

    Order of the facilities is as follows:
    -Windows XP
    -Display driver
    -Audio driver
    Toshiba - common modules
    -SD Card host driver
    -SD Card Driver
    -BlueTooth Stack
    BlueTooth - Easy Connect
    -Mouse driver
    -Modem driver
    -LAN driver included with Windows XP
    -Infrared driver
    -Toshiba Power Saver
    Utilities - Toshiba
    Toshiba - post Mobile
    -Toshiba Console worm.
    -Toshiba Hotkey for display devices

    I hope that you will be able to install Windows XP Home edition successfully.

    Good luck!

  • Satellite Pro L850 - keyboard / touchpad does not work

    Hi all!
    I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
    I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

    It seems that this is not a cause of hardware under the work of bios keybord problem.

    Extra I have updated the bios last version 6.50, but not noticed any changes.

    Please help me with this question, cause I don't have any idea what to do now.

    Good day and w8 for answers

    PCZ

    PS. external keybord on usb work!

    Post edited by: pcz

    The whole story seems incredible. Keyboard and new laptop does not work?
    Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

  • Satellite P10 - 554 dvd - ram does not work

    I got a Satellite P10 554, and as I said above the RAM does not work.
    It should be a software problem, because if I reinstall the drivers it works a few minutes (it did until now yesterday it stopped completely)
    It is impossible to install the new drivers or update a firmware somehow
    (pilot: after rebooting, the old drivers are loaded again (but I uninstalled them))
    (firmware update: I still got the message: invalid drive to update f/w)

    I hope that someone of you can help me ;)

    Hello

    What did you mean with the work of t car doesn?
    You are not able to burn or read the media?

    The error message says it all. I think you re not able to update the firmware because the firmware is not supported on this drive.

    Try to remove the drive from Device Manager, and then shut down the laptop.
    Usually after restarting again the operating system should recognize the drive again.
    If this does not help, you can try to remove the drive from the laptop. Turn on the unit, then go into windows. The reader should disappear. Then stop and reset the drive in the notebook. After this procedure the laptop must load the firmware again.

    It will be useful.

  • Satellite Pro C650 - cooling fan does not work

    My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

    Can someone tell me exactly what the problem is? And how to solve it.

    Thank you.

    > Can someone tell me exactly what the problem is?
    On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
    Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
    Problem can be power.
    Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

    What do you think?

  • Re: Satellite Pro S500 - brightness adjustment does not work correctly

    On my Satellite Pro S500 (preinstalled Windows 7 64-bit) change the brightness by pressing FN - F6 or FN + F7 does not work. The other NF - f... combinations seem to work correctly.

    When I press FN - F6 (or F7) a control box to change the brightness to poster (as expected), but the level is still displayed as "1" independent of the current value (for example changed from Control Panel or with the eco utility) and it is not possible to change it with FN - F6 or F7. I just reinstalled vap and restarted the computer, but nothing has changed.

    Hi asdf.

    I put t know what s wrong exactly but normally the FN keys are associated with value added Package, but you wrote that you already reinstalled

    In my opinion, you should try a system restore to an earlier point. Maybe something messed up the registry, you can start System Restore in Windows Advanced Boot menu.

  • Satellite 1410-303-new CPU does not work

    Hi all
    MI name Fabio, I'm an Italian boy, sorry for my bad English...

    I have a problem with my Toshiba Satellite 1410 303, I buy a new processor (Pentium 4 mobile 2 GHz 512 k 400bus) but it does not work.
    When I turn on my laptop, I hear the system Speaker beep contiunos that never stop until I turn off the system.
    I clear CMOS, and then I spend my BIOS with the latest 1.40 version.

    Do you have a solution?

    Thanks for the help

    Bye!

    Hello

    Have you installed the same CPU than before, or have you installed a different CPU?

    I checked the manual of the Satellite 1410 and he normally equipped with an Intel Celeron CPU processor and in my opinion, it is the reason why it doesn't work.
    Upgrading the CPU is not being official and it seems that the motherboard and BIOS don't support this CPU.
    Check this Toshiba document: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

    Welcome them

  • Satellite Pro L350 SSD upgrade does not work

    Hi all

    I'm trying to upgrade a Satellite pro L350 with ssd, currently I try with an ssd samsung 830. I've already updated the bios to version 2.2, but it doesn't work. Can someone help me?

    Concerning

    Mike

    and what exactly does not work?

    The SSD is recognized by the BIOS?
    Have you checked if the SSD has need of a firmware update or if a firmware update is available

  • Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

    My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

    Can you help me solve the my problem please?
    Excuse my bad English...
    Thank you
    Jorge Neto

    HI Jorge,.

    If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

    Kind regards

  • Satellite Pro P750-136 - Bluetooth does not work.

    Hey

    Bluetooth to my P750 no longer works. I went to device management, and it was the bluetooth rfbus which seems to be the one who does not work despite the driver is correctly installed and updated.

    I have the laptop for a long time, so assume everything is a P750-136 default on w7. What would you suggest I do? I tried to reinstall the bluetooth stack thing with no luck (taking into account, the bluetooth is working).

    What happen when you try to activate the BT using the FN + F8 key combination?

  • Satellite Pro L100 - FN keys does not work

    When I press Fn + F5 to switch between my LCD and an external monitor, nothing happens. Do not see all the windows appear on my screen to display the current mode of the screen (LCD or external) while I'm activating/deactivating keys.

    By pressing Fn + F1 (function of the white screen) also does nothing.
    However, the brightness & related Fn + sound combinations work.

    It seems as if a utility somewhere does not work.

    Please notify.
    Thank you.

    Hello!

    You use Windows XP or Vista?
    For Vista, install the package on the Toshiba value added in.
    For XP, install the shortcut key utilities and utilities Toshiba.

    The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite Pro L40 - wireless adapter does not work - Vista

    I recently had some problems with my laptop.
    A couple of weeks, I put in a disc of OpenSuse.
    It's not stable anything, but locked me out of my original Vista operating system.

    I reinstallled Vista Home Basic, but there are a few problems.
    Mainly, my wireless adapter does not work.

    When I flip the button to turn it on nothing happens and it is not recognized in Windows.
    I installed Atheros Driver, but still nothing happens, light is not yet.

    Any advice?

    Hello

    First check the device-> network adapters area manager
    You see the WLan card? Or the unknown device appears?

    If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

    Remember that your wireless network card? Maybe it was a Realtek WLan card?

    If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

  • A Satellite Pro 6100 graphics card does not work correctly

    Hello!

    I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
    I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

    Now my questions:
    1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
    2. How can I do this, is there some tutorials, especially for my laptop?
    3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

    I thank very you much in advance!
    Lukas

    Hi Lukas

    The led flashes as it provides a microcode error!
    This is especially if the malfunction of hardware has been detected.
    I presume that the replacement of the graphics card is the reason!

    As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
    Looks like that the BIOS cannot handle this new graphics chip.

  • Satellite Pro C50 - A - BT does not work on a machine virtual Windows XP Home edition

    Hi people,
    We bought a C50 - A Pro of the Satellite with windows 7 installed to run a specific industry software that will work on win xp. We are running xp on a virtual machine that is installed.

    The problem we have will connect to a specific device by Bluetooth. While we are not very tech savvy, we are able to connect this device to other computers running windows xp, 7 & 8 use Bluetooth Assistant.

    The laptop can find the device to set up a connection, but does not connect (we used the same method on other laptops with success).

    We have v9.10.11 (t) of installed Toshiba Bluetooth stack. We were in the guide-utility Toshiba Bluetooth and checked for the updated driver but are always blocked.

    Can anyone tell if there is something specific to the Toshiba we have not been able to identify? Assistance would be greatly appreciated.

    Best regards, evil.

    > The laptop can find the device to set up a connection, but does not connect (we used the same method on other laptops with success).

    Any news? Have you found a workaround?

    I don t use the virtual machine and to be honest I m not very well why you can not connect to the other BT device but in my opinion the question isn't associated with the battery of Toshiba BT from the stack seems to work correctly because the BT device is recognized properly.

  • Satellite Pro M50 - upgrade RAM does not fit

    Hi, I'm looking to upgrade the ram in a Satellite Pro M50, I bought a stick of crucial but although he mounted in the slot (and was regarded as the correct product) machine didn't post with it, I bought another stick (different brand) and installed this but get the same problem. Looking at it, I noticed that the notch in the existing stick of 256 MB is a bit (a few mm) out against the new stick and of course although they fit into the slot, the actual pins on the stick won't line up properly.

    Is this a known issue? Do I have to buy a specific brand of RAM in order to modernize the system? Crucial guarantee their RAM to work, very unusual that it didn't work that way for this system of tosh.

    Thanks in advace to anyone who can enlighten us!

    GYS

    Hi GYS

    S let speak quite clearly, for RAM upgrade, you must use compatible RAM modules. I hope you know what that means compatibility work.
    So if you want to be sure you are using the right RAM modules and compatible I recommend modules memory live 1024Mo PC2700 to use with the PA3313U-2M1G part number.

    You can upgrade your laptop up to 1 GB of RAM and using two of these modules, you will be able to use maximum RAM and also make sure that the Rams will be suitable for your system.

Maybe you are looking for

  • Create a table of values for which a condition is met

    I have exactly this problem, however connected solution is no longer valid: Re: table to automatically generate values if the condition is met, Basically I have a table (named 'Master Sheet') that has two columns, one with project names with a status

  • Portege 3480CT: problem installing updates in Windows 2000

    Hello I've installed windows 2000.Download and install Service pack 4 and IE 6 would install windows updates.Have not yet put the graphics drivers, I would not have thought that it would make a difference. When I try to download and install the autom

  • Satellite P10: black screen - single led light

    My laptop has given me a few problems:Problem 1 = does not recognize blank DVDs so I can't burnCure - bought an external drive Problem 2 = off work even if usb ports said troubleshooting fine them, searched several tips & followed various procedures

  • 0xC004F055

    I have download Windiws Vista Ultimate on the internet and when I try to enter the program an error box appears, with the error code: 0xC004F055. Now, windows xp is gone and I don't know what to do. What should I do? Help!

  • SE recoverable material Non-erreurs

    I'm helping a friend When running the diagnostics, I found these errors. How can I fix them or is the hard drive bad? Thank you