Satellite Pro 6000 turns off all the time

Similar Questions

• M35 satellite turns off all the time

  My Satellite M35 turns off all the time.
  Trigger, then it dies.

  Advice please

  Seems to be a problem of overheating!
  Usually, this happens because the cooling modules cannot turn with maximum performance and cannot cool the internal devices properly!

  Why is this happening? Well, the reason is the dust and debris that prevent the fans work properly!
  I recommend cleaning with compressed air stream fans that can be purchased in most computer resellers!

  Good bye

• Bug in version 6.2.1 of the filter? (flag to reset filters turned off all the time)

  I love working with the filter with indicator / without indicator with my photos.
  With the 6.2.1 last version, with indicator filter go back "filter off" all the time.
  Example, 3 pictures are marked, I select, I merge them into an HDR... .and when you finish the filter is reset to filters turned off.
  Also edit a photo in Photoshop... .returning to lightroom... .filters off

  Quite boring!

  also ask, if you merge 3 pictures that are flagged (picked) in an HDR, it would be nice that the merged result is marked as?

  I think that you have unlocked filters.  Make sure this file > library Filters > Lock filters is verified (the lock is also represented by the padlock on the right end of the library filter bar - make sure that it is locked).  When it is locked, the current filter is not changed by Photo > merge pictures (at least in my 2015.2.1 CC).

• Satellite A300D - Turn off all the time

  My wife has a Satellite A300D (model PSAK4E) and it keeps closing. The two randomy and when induced under certain conditions

  Previously, I tested the HARD drive and found bad sectors then replaced with a 64 GB SSD. I tried to install Windows 7 but it kept fault towards the end. So I reset the machine without a battery and now the power button for 2 minutes to clear the memory. Installed Windows 7 + updates.

  I was worried about stopping all the time but flashed the BIOS. Flash worked.

  Laptop resets always? I have reviewed several possible causes and wanted to get other peoples ideas
  1 HARD drive - replaced and even resets
  2. battery - ran on power sector only and even resets
  3 overheating - sometimes under certain conditions (memmory tests or you try to run certain applications) or randomly (without reason)
  4. a broken circuit somewhere on the motherboard
  5 - completely new OS + software resets the laptop when using some applications from a live disk.

  Thank you inadance for the help

  Hi me_in_oz,

  Theoretically the laptop turn off itself due to a higher internal temperature to protect the equipment against damage.
  In this case, you will need to clean the laptop using jet of compressed air to blow the dust from the cooling fans. It is easy and takes only a few minutes to check out this article:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  Otherwise it seems to be a serious hardware problem and your laptop should be checked for professional people. Probably it s a malfunction of the motherboard

• Satellite Pro A120 - fan run all the time

  OK, so this is a strange...

  I have a satellite Pro A120. It works with the fan on all the time and sometimes goes on a mayor go slowly (which I think can be reduced to overheating).

  Operating system is Ubuntu and I installed the tool of sensors that tell me about the minute the temperature is 100 degrees c and the next one is 16!

  I suspect that it is perhaps that the heat sink is full of fluff, but I can't find a guide step by step to dismantle the machine, clean it and put it back together again.

  Can anyone help with ideas or resources?

  Thank you very much

  Nathan

  Hello

  You do not need to disassemble the unit to clean the fans.
  You can use a jet of compressed air which helps to remove dust.
  I did it several times and it helped!

  Try it!

• Automatic Updates turned off all the time XP

  Updates automatic turn off XP SP3 its own WARNING all the time constantly security - I have Kaspersky internet security 2012 worm 12.0.0.374, 8 GB of Ram. Intel CPU machine compatible PC.

  I saw the other posts on this - doesn't seem to be one definitive solution other than to search for malware.

  Is there any software/malware known that this may be because of this?

  Hello

  I am happy to know that the problem has been resolved and that I could be useful.  If you have any questions on Windows then post in this forum.

  It will be useful.

• Satellite U500-10F - Dungeon fan turning ON and OFF all the time

  Hello world

  Just bought my u500-10F and installed Windows 7 Enterprise on this.

  Having a very weird problem, the fan keep turn on/off all the time every 10 seconds or more, even without any CPU load. Any ideas? Is there a fan control software?

  Rgds,
  Arley

  As you know that Win7 is not released and without support, there is therefore no Toshiba Software for any type of power control and the fan at the moment.

  Have you noticed the same behavior of fan preinstalled Vista operating system?

• My computer has turned off all the themes of Windows 7 except Classic

  original title: My Computer has turned off all the Windows 7 themes. I can only access classic themes. How can I get new themes to return? Thank you

  Hi, my computer is Windows 7 Professional has changed suddenly automatically the Windows Classic theme and all the other themes are grey and not accessible. How can I access the window 7 themes yet. Thank you.

  You can also check in your windows Services and check that the DWM (Desktop Windows Manager) is running.

  Start button > Search > type Services and select.
  Look and to make sure it runs.

• After BIOS update easy media are turned on all the time

  Hi all

  My problem is:
  TOSHIBA TEMPRO alerted me to update BIOS my laptop and I installed the update but, after the update done
  MY TOSHIBA easy media LED is all the time and power on & off led does not work very well

  And if I want to turn off the LEDs, I have to restart my computer and enter the BIOS Setup and turn off the coast of the LED from there

  Can help any body for this problem, or if I can restore my last version of BIOS?
  THANKS TO ALL HERE.

  I don't know what model of laptop you have, but on my Satellite A300, everything works fine.
  I disabled the illuminance in the BIOS settings, but I can always turn on or off using on/off button.

  Has your computer laptop original Vista preinstalled?
  I don't know if this will help, but you can try to remove the package value system and after reboot to install the latest version of the Toshiba download page.

• Firefox sometimes freezes my computer when I go to some sites for about 10 seconds and my hard drive is turned on all the time.

  This happened since I upgraded Firefox 3.6 Firefox 18 when it was released in the 23.0.1 that I have right now. When I go on some heavy such as yahoo news, browser specific websites and my computer will be blocked for about 10 seconds while my HDD is on all the time and the only info on: crashes gives me a link to a page called limitation, which apparently no longer exists. It happens that its manual or automatic cache on size and only seems to happen when its max cache. Depending on the subject: crashes, it happened only 4 times before I went from 3.6 to 18.

  Ive tried turning almost all my addons turned off and that did not work, Ive had harware acceleration turned off for a long time if it's not that. I still have all my plugins off except flash and it does not have anything to do with flash. The report of health of firefox it also count as an accident.

  I worked in fact observe that its almost always the comment system on the pages of Web sites such as disqus. IM blocking them just through them with ghostery and anti-ad element hider.

• Satellite Pro 6000: can't find the right WLAN driver

  Hello
  I have re-installed Windows Xp on my laptop Satellite Pro 6000. Everything works except for the wireless connectivity.
  When we look in the Device Manager, I see that the WLAN driver has not (or wrong) was installed.
  Then looked at the Toshiba site for the drivers, but I am not able to find the right one. I found some drivers, which seems to be the one, but unfortunately after installing the drivers, wireless connectivity is still not available.
  Any help would be appreciated.

  Thanks in advance.
  Best regards, Robert

  Hi Robert

  Stand by! Connectivity is not available or the WLAN card is still not installed correctly in the Device Manager list?

• Display does not decrease or turn off after the time specified in the power settings.

  Hello

  I have HP Pavilion dv6-2140's. It is 1.5 years old. For a few days, my computer doesnot dim laptop screen or stops itself when not in use. I did the settings or power options. tried both recommended hp and energy saving. waited for several minutes, but neither the screen became decrease or stop. It was plugged and I slept something, but I knew he would go to standby mode after 15 minutes, but when I woke in the morning, he was still on with its full brightness for nearly 6 hours! That's what really shocked me, and then I checked for everything on google, but couldn't find anything. So please help me. Why is it so. I didn't install anything, nothing updated.

  Thank you

  Please update the latest version of the BIOS for your laptop and also check if your laptop screen is turned off when the unit works only with the battery.
  Go to control Panel\All Control Panel Items\Power Options\Edit Plan Settings and configure the parameters of the battery and check if the display turns off. In case it does, you can try then configure the parameters of the plan when the unit is plugged.

• Satellite Pro 6100 turns off when I connect the power adapter

  Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
  Any ideas would be appreciated

  see you soon

  Hello

  You use original Toshiba AC/DC adapter or another?
  What happens if you connect the AC/DC adapter, while the laptop is turned off?

  It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

• Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

  A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

  I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

  To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

  I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

  The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

  Your thoughts will be greatly appreciated...

  WTF?

  What is an unmoderated forum?

  Can someone help with my problem?

• Start button does not work and turns off all the icons

  Hi there, I try to open my Start menu does not work, and all my turns off desktop icons. I don't know what to do and I really have a hard time with these two problems. Any help would be great.

  I try this method and none of them work

  I have AVG Antivirus, I run it twice but nothing found

  I also run sfc/scannow in cmd promt twice, but it is 100%, nothing wrong here

  Any other comment, please help

  Much Apprecciate

  Do not have access to Safe Mode if you ignore the system restore and click on the button on the Start Menu?  Your initial problems are repeated in this case?

  If you can access Safe Mode things, see if it will help you create another user, and it will allow to test this new user in Normal Mode of loading.

  Also, if you can in Mode safe, download and run this program in mode safe mode and let it scan your computer for malware.

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  Try this mode safe too.  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  If Safe Mode is not an option for you, see if you can access options of startup repair (be it to start any Windows Vista DVD or the Safe Mode screen options).

  Startup Repair.

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

  Startup Repair: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See if you have any DVD installation or another way to run the Startup Repair tool.

  Windows Vista download Recovery Disc
  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  If you still have problems after all that you can post back and we'll consider a data restore and reinstall options.