Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

Similar Questions

• Satellite Pro 6100 - battery acting very strange.

  As mentioned in the title, my laptop battery is very strange.

  The symptoms are:

  When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
  Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

  This reacondioned back to normal battery or is this safe to use battery?
  Thanks in advance!

  Hello

  I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

  But even if the battery is faulty, you should be able to use the device connected to the power adapter.
  So even if the battery is removed, you could power the unit with the mains.

• Satellite Pro 6100 - Question on WLAN adapt and mac address

  I bought a second hand of Satellite Pro 6100. It has a WiFi adapter. It is where and how do I know the macadress of the adapter?

  Thank you.

  Hello

  If you are sure that this laptop was equipped with the Wlan card, and then the MAC address can be easily discovered 100%.
  You must start the console with the command: * CMD *.

  Then use the command: * ipconfig/all *.
  This would list all the details on the WLan/LAN cards installed in the laptop.
  The physical address means MAC address ;)

  This should help!

• Satellite Pro 6100 cannot get my GyroTransport new 'air mouse' to work

  Satellite Pro 6100 running XP Professional with SP3 and all updates as of 10/24/08.
  BAUGHT a new mouse made by Gyration GyroTransport air, but it won't work on my laptop.
  Tried in several other computers with the same OS and it works very well. In fact as a teacher, I recommend one of these brilliant sound devices.

  I tried all settings via the control panel and can not work on why it won't work.
  The laptop recognizes the name of it when its plugged in but the States, he has a problem. The dongle USB/receiver with a memory stick with some additional software on this subject, but the laptop does not regognise the memorystick at all. He acknowledges that other memory stick no problem.
  That technician school COMPUTER looked at it and can't get by either.

  It is usually on the spot.
  Any body out there of suggestions?

  This mouse works on some laptops newer with USB 2.0 ports?

  One last thing: If you use some additional hardware to help apply the manufacturer's support. Computer laptop manufacturer doesn't provide support for certain third party materials.
  What Thompson says about this problem?

• Satellite Pro U300: Battery LED indicates low power using Linux

  Hello

  I have Satellite Pro U300 and I'm using Linux.
  I have a problem of opinion on my PC, it does not indicate that the battery is low (without flashing) and lights out.

  What this indicator a software driven or it's a hardware problem on my laptop?

  Another small problem that was Watch not remember brightness for battery mode.

  Thank you

  Hello

  > I notice a problem on my PC, it does not indicate that the battery is low (without flashing) and lights out. What this indicator a software driven or it's a hardware problem on my laptop?
  > Another small problem that was Watch not remember brightness for battery mode.

  Please don't be angry with me, but first I would not talk about problems if you use Linux on the Toshiba laptop. Is that Linux is not supported and that's why some features of laptops may not work properly.

  About the light battery;
  The LEDs are controlled by the BIOS. As you know the laptop was running Vista and so the BIOS support for Vista.
  As I said above, if you use another OS like XP or possibly Linux so some features may not work properly.

• Satellite Pro 6100 often randomly turns off and bad RTC error

  Hi, I recently bought a sp6100 and it worked fine at first but now it goes out often random and comes with BAD RTC ERROR at startup. As a musician who uses the pc, it is very painful and I lost much of my work. Anyhelp would be great. Conrad

  HI Conrad,.

  Power loss random is usually a symptom of overheating and can usually be cured by cleaning all dust and lint that built into the CPU radiator. A vacuum cleaner is a useful ally in so doing. Just put the hose against the grids of aspiration air for a few seconds.

  The RTC error refers to the adjustment of the real time clock which is normally held by a small battery, usually mounted on the motherboard of your laptop. It is used to maintain the settings of the BIOS (including date/time) and is completely separate from your main laptop battery. Modification of the RTC (or CMOS) battery will involve some disassembly, so is best left to an authorized Service partner.

  Kind regards

• Satellite Pro 6100 cannot start - message PXE - E61 and PXE - MOF

  My dad just bought me a satellite pro 6100 for United off ebay and when I turn it on the toshiba screen comes up, followed by: PXE - E61 and PXE - MOF. as I am a total blank computer I have not a clue what to do! any ideas...? :)

  Hello Naomi

  Don t worry, it sounds not very badly. I think that you will solve this problem by changing some settings in the BIOS. ;)

  To my knowledge, this message appears when the LAN option has been fixed at the beginning of the boot order. So solve this problem to get into the BIOS (ESC and F1) and then change the order of Boot CD Drive drive HARD etc...
  Please set the LAN at the end.

• New on Satellite Pro 6100 WLAN card installed, but can not be activated

  Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".

  I tried upgrading to the latest version of BIOS
  I reinstalled the latest drivers
  Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
  Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.

  Past and present, wireless card fail to see any network.

  Martin

  Hello Martin

  This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.

  I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
  What do you think of this?

• Satellite Pro 6100 memory upgrade

  I don't have a model of toshiba satellite pro 6100: PS610L-04NVN of Singapore and it currently has 256 MB of pc2100 memory installed and I am wanting to install another 256 so I have 512, but now I would like to know:

  1. If I get the memory of a vendor of kingston, it'll work with this laptop, it is has 2 different types of memory, because there KTT3311 (333 mhz) & KTT3614 (266 mhz)?

  Hello

  The memory module manufacturers are not very important. But of course the modules of memory "no name" performance not as good as other modules such as Toshiba or Kingston.
  Module properties are very important. This unit uses PC2100 DDR - RAM modules.
  I found compatible modules:

  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

  If you use the same modules and only the speed is different so the laptop will use support at reduced speed.
  In your case a module supports and other at 266 MHz 333 MHz. The laptop will support at 266 MhZ.

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• 'Bad RTC battery, check the CMOS' on Satellite Pro 6100

  Hello... I just got a Satellite Pro 6100 and when it is started I get an error message:

  RTC BATTERY BAD
  BAD CHECKSUM (CMOS)
  Check the system. Then press the [F1] key
  _

  I can still use the laptop for about 15 minutes, but then it crashes. I did some research and discovered that it is the power supply Board. But my laptop is out of warranty and the reminder is now officially over.

  Y at - there someone who can help me?
  Thank you
  Liam

  Published by: admin

  Hi Liam

  Hmmm... I think it s not a Council but the battery of the CCF.
  Take a look in the user manual. There you should find something that exactly the message is displayed if the battery RTC (BIOS) is not charged.

  The RTC battery, you must connect the power adapter and should run the laptop for about 24 hours.
  After that the main battery has been charged, then the RTC battery starts to load.

  It will take a little longer.

• Satellite Pro 6100: very slow recharge battery

  I bought a new battery pack for my Satellite Pro 6100 because my old Battery Pack loaded very slowly, about 5 per cent in 12 hours. But it turns out that my other one has the same problem.
  The problem may be the charger or the laptop.
  I already tried to unload the batteries fully.
  Can someone help me.

  Hello

  It is not easy to tell what can be the problem, but if you use the new battery pack and the problem is there, it is possible that electronic power on your laptop is not working properly.

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Solution found to the problem of "BAD RTC BATTERY' on Satellite Pro 6100

  Hi, I'm from the Italy.

  I myself have solved this problem without changing the motherboard on my laptop second hand satellite pro 6100.

  for info: [email protected]

  Hello

  may I ask how you solved this? I have the same machine and this error pops up sometimes.

  Welcome them