Satellite Pro 6100 - display driver and his resulution

Similar Questions

• Satellite Pro 6100: which drive and the connection is supported - master, slave and CSEL?

  Hello

  I want to install a Pioneer DVR - K14L DVD burner.
  After installation, the notebook show me a
  error during initialization.

  It is possible to use this type of DVD Slimline burner?
  What kind of modus is important (master, slave, or CSEL)?

  Thank you and

  Best regards
  oelauge

  Hello

  I guess you get an IDE # 1 error message. Am I wrong?
  The fact is that not all readers are compatible with laptops.
  I don't know what parameters should have the caught player supported. But I assume that it might be a CSEL.
  However, I found this DVD - RW drive that must be compatible; the reference is P000366780
  http://www.getpartsonline.com/p000366780.html

  But unfortunately, there is nothing on the assignment of pins and settings.
  If you want to be sure of devices supported on your laptop computer at 100% so you should ask the Toshiba service partner in your country for details

• Need to drive caddy HARD and coverage for Satellite Pro 6100 HARD drive

  Does anyone know the part numbers or to get a hard drive caddy and the Satellite Pro 6100 Series hard drive
  Thank you

  What caddy did you? Internal an external 2.5 USB caddy for a HARD drive or the case?
  I think that if you need a domestic framework for laptop you should order it since the maintainer authorized Toshiba in your country.
  I think that guys should be able to order something like this directly from the Toshiba store

• Toshiba Satellite Pro 2100 - display driver resolution - help!

  My laptop screen is 15 inches and resolution 1024 x 768. He worked always good. Until I installed Windows XP SRV 2 once again. Now, the screen only works with 969 x 768 pixels. Without the ability to use the whole poster resolution. So I downloaded and installed the toshiba display driver. But still the same problem. (Black band on the right side) part of the display resolution remains unused and remains black.

  I tried everything in the display settings of display resolution, but the law remains black strip unused

  This unused black band is om the right side of the screen.
  The rest of the computer laptop good workt without problem

  A frend of mine has the same problem with a toshiba Satellite Pro 6100. After insalling Windows XP and the appropriate driver, the screen leaves a band black and unused.

  Can someone help me please?
  Thanks in advance.

  Hello

  Can you please check under display properties > settings > advanced > monitor, is there possibility to activate the option Hide modes that this monitor cannot display.

  If you want, save your data and reinstall OS with recovery CD. Check if your monitor is working properly and there is black band again.
  I ve done the installation of SP2 several times without any problem. It is not a simple to determine what can be wrong with it.

  If you reinstall the operating system and there is no black band again, please let me know. I am very interested about your problem.

  Good bye

• On Satellite Pro 6100 HARD drive password

  Hello

  I have an almost dead Satellite Pro 6100, I was almost back on its feet, but we wonder a HHD password on start up. Apparently, one of the portable computers security features is "Password HARD drive on request".

  There were ideas! Cannot ask the laptop I can't!

  When the HARD drive password is set, and you start the laptop you must enter this password. Otherwise the drive will not spin.
  The functionality of the HARD drive password is to secure the data on the disc. If you do not have the password: no chance to use the HARD drive.
  So if you can't enter or ask for the password you must swap the HARD drive.

  Buy the way it is always strange if someone "owns" a laptop and one does not know the passwords! If you bought the computer laptop may it is stolen...

• Need XP for Satellite Pro A60 display driver

  My PC in safe mode when on game sites is now and I'm having truble locate the driver.
  I need help laocating and installation which I new complettely instead.

  Hello

  Visit the page of the European driver Toshiba:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, you have to choose:
  Archive-> Satellite Pro-> A-> Satellite Pro A60 Satellite Pro

  Then you could find the display driver and can download and reinstall.

  Good bye

• Impossible to update on my Satellite Pro C660 display driver

  Hi, I have a Satellite Pro C660-2DN, and I'm trying to update my display on the site of Toshiba UK driver as Intel takes back me to Toshiba when I do their thing driver assessment.

  I downloaded the last three display driver updates that I can't in the list that matches the C660 but none of them won't install - temporary files are extracted, but then nothing happens. Could someone help me?

  Thank you.

  And what operating system are you using?
  You have still preinstalled original Win7 64 bit home premium?

• White screen after the Satellite Pro P200 display driver update

  I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

  Things I've tried:
  # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
  # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
  # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
  I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

  A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
  previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

  I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

  Please give some information about your situation...

  See you soon

• Satellite Pro A100: Display Driver ATI Mobile Radeon X 1400 WinXP

  Hello there :)

  I have browsed the forum and could not find another thread that helps me. I have a Satellite pro A100 PSAACE laptop, equipped with a Mobile Radeon X 1400 graphics card. Now, I was informed by the games that I play that drivers are up-to-date. I think it is true that in the last few days, I formatted my laptop and then only initial drivers from the disc of recovery of the product are to be used.

  I visit the ATI site, and they inform me that I have to contact my laptop to the manufacturer (that Toshiba are not in the list of supported manufacturers) in order to get the new drivers. If I remember I should get all my updates page to download the driver from this Web site. The only problem is that apparently he not there no update driver for the graphics card (to share for one for Vista).

  I recently reformatted my computer using recovery of product, and so that's why I was after the new driver. I don't remember for sure, but I'm pretty confident that I have already downloaded a updated driver for my graphic chipset during the last 14 months of use (before formatting my hard drive).

  Now, if someone could offer any help to find the driver, or have information about the problem, it would be highly appreciated. Once more, my specs (you need to enter on the page of the driver) are portable series A100, PSAAC, PSAACE, and I use Windows XP.

  Thanks for reading, and I would appreciate any feedback whatsoever.

  Hello
  You can find the display drivers at the following location:
  http://EU.computers.Toshiba-Europe.com (Support & downloads), choose your type of laptop and then download the ATI display drivers.

  Make sure that you select Windows XP as the operating system. Check it out.

  But note that the display drivers for laptop computers are not updated as often as for desktop PCs. If you encounter serious problems with your real driver version then just leave it.

  You can find the other drivers on the internet, but to use at your own risk.

  Post edited by: HomerJ

• Satellite Pro 4280 - display driver?

  Hello

  I'm kinda new to all this malarky and could do with help.

  I have a Pro 4280 under 98SE and today tried to upgrade to XP Professional. Everything seems ok, but the display is terrible!

  I tried to change the screen resolution in Control Panel of configuration, but without success.

  Is it just a case of updating the display driver, or is there something else I should do?

  Hello

  If you install the graphics card from the operating system uses just driver installed by OS. If there is no possibility to change the resolution, you should try to install the right driver. Your device's graphics chip "S3 Savage IX" installed. Please consult the producer download site and check if it is possible to download the right driver.

  Good bye

• Satellite Pro M30 Display Driver

  I'm having some trouble updating my display of my SPM30 driver, for example, when I try to load Age Of Empires III Demo, it says that my display driver is outdated and I need an update. (I can't even access the game...)
  The same thing happens when I try to load Half Life 2 and Counter Strike Source...
  I can play HL2 and CSS, but someone told me that I can get better performance if I updated my display driver...

  So I tried to install the driver to display available on this site here...

  This was the result, I found:

  -----------------------------------------------------
  01/09/04 Windows XP 45.56 nVidia display driver
  -----------------------------------------------------

  I have a few questions on this one there...

  * 01/09/04?
  WTF, this driver is one-and-a-half year ago?

  * version 45,56?
  When you check the nVidia site, I found that they are already using version 78.01...

  What is the problem with Toshiba? When I tried to install the video driver, I had an error with something compatibility...
  nVidia says that my card is not on the list of supported cards, but also not on the list of maps is not compatible... (GeForce FXGo5200)

  Now here's my question, where can I get the update for my display driver, so I can run most recent gams like AOEIII?

  I did not find on nVidia.com but also not to have toshiba.com

  Please can anyone Toshiba bend on this and fix this or send me an email for a solution?

  Thanks in advance...

  Bart

  [email protected] / [email protected]

  PS: anyone else with the same problem?

  Hello

  as far as I know the nVidia card is able to operate with more performance, but not in a book. The cooling is not enough, the chip can be damaged.

  Good bye

• Re: Satellite Pro L10 - display driver for Win7RC

  Hi-

  Were able to successfully install Windows 7RC on the L10. There is a missing video card driver and I can't seem to find it on the download site (XP drivers seem compatible with Win7 because of its XP mode).

  Apparently, this has something to do with the graphics card & I get the following message is displayed:

  [http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=12.0.7100.0&id=C00D1167&contex tid = 61 & originalid = C00D1167]

  Someone know where I can find the right driver for it?

  Thank you

  Hello!

  Normally, you can find all the drivers for your laptop here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But it seems that the display driver is available for Windows XP only.

  As far as I know that this laptop is equipped with an Intel graphics card so I would check the Intel website for a Windows driver. I'm pretty sure you'll find a driver for Vista (which should work on Windows 7) and perhaps already for Windows 7 also.
  Check it!

  Good bye

• Satellite Pro 6100 displays a "Built-in HDD Password" message whenever I start

  Hello, my computer displays a "Built-in HDD password" message whenever I start. I never set any password on the hard drive in the past, although in desperation to try to get the laptop running, I tried all possible passwords but there is no answer, I would be grateful for any help or advice. What should I do?

  Well, I put t know what you did on your laptop, but as far as I know it's not possible to remove the HARD drive password.
  In this case, the HARD drive is not usable, and therefore a new HARD disc has to be ordered.

• Satellite M70: Need WLan driver and his

  Firstly all Hello everyone.

  I am writing because I have format my laptop and now I'm trying to get the drivers on my laptop.

  Downloads of the Toshiba site are very slow, I tried on more than 1 computer and very, very slowly. Something? There is another possibility for me.

  Problem 1:
  I try to look for the WLAN drivers but the only driver Toshiba site gives me is the Atheros, but I try to installed and nothing, can someone help me and tell what is the right driver?

  Prob2:
  For audio driver, I need to download virtual audio driver, or only the audio driver on the Toshiba site?

  Thanks in advance,
  Nuno Quitrio

  First of all, you should check your notebook series and must choose the right because there are two different sets of M70.

  In regard to point 1:
  Either your laptop uses the Atheros Wlan card or and card Intel.
  The two driver Wlan are also from the Toshiba WLan Portal:
  http://APS.toshiba-tro.de/WLAN/

  In regard to point 2:
  The virtual sound is not necessary to get the sound on your laptop. You can install the virtual sound, but the audio driver is more important.

  Greetings

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!