Satellite Pro 6100 does not start - power light flashes

Similar Questions

• Satellite Pro 6100 does not start

  Hello

  I have a pro 6100, and since 2 days I can not start my mobile:

  When I push the button, the sector led is green, the start led is green and the HDD led is green... but nothing to start!
  I remove the battery and I start just with the sector, but it's the same thing. I try to change the RAM, but it's always the same...

  could someone help me?

  PS am french so I hope you'll excuse my bad English ;)

  Hello

  First, your English is fine. ;)
  But now something about your question. It's not easy to say what the problem is.
  There might be a hardware malfunction, maybe a HARD disk. But you should first try to retrieve the device with the Toshiba Recovery CD supplied. Try to boot from the drive.

• Toshiba Satellite Pro 6100 does not start

  Hello
  I used a Toshiba SP 6100 until a few weeks ago because it started to act weird. It would not start at all, I called an authorized service center but they wanted me to pay 900 euro for a new motherboard, so I bought one off ebay ;-)
  with the first motherboard (the original one it came with) the DC leads IN was and recharging the battery but it wouldn't let me turn it on.
  With the second card of mother seeing him IN DC was on and battery LED was blinking pretty fast (then I was confused).
  Now I have two all lower parts (each with GF4 GB and P4m 1, 6 GHz) that doesn't quite work.
  Do you have the solutions for this?
  If so I'd be happy :)

  Daniel

  Hi Daniel,.

  Your description of the problem in your original motherboard certainly indicates a card failure. What worries me a bit is at the origin of the new motherboard.

  Your new motherboard will also include the CMOS chip that will contain your BIOS. I can only assume that the new Board of Directors contains a default BIOS rather than a suited to your Toshiba laptop. An Agent of Service Toshiba has special techniques for loading the BIOS OK to activate the new motherboard work.

  You should check with the provider of your new Council what BIOS if one is loaded.

  HTH

• Portege M100 does not start - power light flashes orange

  Hi all

  I have a Portege M100.
  Since ysterday, the computer does not boot. When I push the power button, I hear the noise of the fan starts working, but nothing else happens. The power light continues to blink in orange.
  I removed the battery and tried to turn on the computer with the AC adapter is plugged in, but nothing changes.

  Any ideas on what could be the problem? I would appreciate help,
  Thanks in advance

  Yalin

  Hi mate,

  could possibly be the RAM, so please check the RAM modules and remove 1 module if you have 2 of them installed.
  Otherwise, I check if some another module of RAM is available and install the module of well known work. If this is not sufficient then I strongly recommend you to bring your machine to a service partner chartered for a balance of health/repair of equipment.

  Please give some information about your situation...

  P.S.: you can try to remove the battery and AC and leave the machine without power for about 24 hours. Maybe it helps?

  Welcome them

• Satellite Pro 6100 - does not start and displays a diagnostic code

  The 6100 Pro Satellite has stopped working after sitting for two weeks off fresh. A new battery did nothing.

  The usually lights green when the charge now turns orange, but does it also with 4 consecutive games of a long and a blinking short, followed by a pause, followed by another series of flashes, continuously.

  Where can I find what this diagnostic code (I guess)?

  Hello!

  I think that these diagnostic codes that you can find in the manual technique, but this is only available for authorized service providers.

  But you can start the laptop without battery and AC/DC adapter only?
  Maybe you should try to remove the adaptor AC/DC and battery. Wait one hour, then reconnect the two devices. Now, try to start the laptop.

  If it doesn't work I suggest that you should ask a technician for help laptop. It seems to be a hardware malfunction

  Good bye

• Tecra 9100 does not start, power light flashes

  My tecra 9100 is boot is no longer, when I press the button works / laptop acts although it will start up (only for a second sheet) but instead completely stops and the light starts flashing in a sequence of (short 2, 1 x long, 2 short, 2 long, 1 short). I really need help, and I was wondering if anyone has had the problem before and knows how to solve this problem.

  Thanks in advance

  Tayler Hughes

  Hi Thibault

  I'm afraid that there is a problem with the electronic board. When the power led is flashing, it sends the hex code. This code should help technicians to see what the problem is with the laptop.

  Only thing you can do is remove the battery and try to boot up your laptop. I don't think this will help, but you can try. If the same thing occur, you must contact services partners in your country and ask for help. Sorry! :(

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite Pro L300 - does not start form DVD

  Problem: my Satellite Pro L300 will not start no optical drive (DVD)

  Leisure problem scenario:

  Insert the DVD Toshiba recovery in optical disc drive,
  Restart and during the boot prompt, press F12 and select the optical drive.
  Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

  Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

  Model No.: PSLB1E-02200GG3
  Serial 78685377Q

  I'm doing this because I want to change the OS from Vista to XP.

  Hello

  Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

  Have you tested with any other CD bootable (Linux)?

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Satellite Pro 6000 does not start

  I have a 6000 Pro satellite, which does more boot. In recent years, he was skittish to get initially, I found exercising pressure on the right of the mouse would normally it starts in life.

  A few months ago, it got to the point where if I released the pressure it immediately off himself. Now I can't start at all, even when the application of pressure.

  When I plug the power supply in the power turns on and the battery light turns orange. If I just press the button start there is a short burst of blinkers and lights that all out. Then the power light flashes orange. This continues after removing the power cable. I need to take out the battery to stop the electric orange flashing.

  If I try to start the laptop while applying pressure with the thumb to the right of the mouse looks like it's working as the hard drive light and sounds of disk as it turns. Unfortunately, that's how.

  Research on the symptoms, that looks like it's a case of the fault of card mother feared the 6000 series is infamous for. I not mistaken, and is there something that can be done?

  Thank you very much

  Hello

  It looks like a hardware problem possibly there is something wrong with your surfboard because the power light flashes.
  This means that an error has been detected on the motherboard.

  Generally and laptop technician could read and can tell what's exactly wrong.
  But in most cases, a motherboard must be replaced if a motherboard error has been detected. :(

  Welcome them

• Satellite Pro L20 does not start

  I have a new satellite pro L20 M750
  does not start
  the thing is since the first time I tried to start it it would not start.
  I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.

  Thanks in advance

  Hello

  Did you check if the AC adapter is working properly?
  Initially, the battery is not charged. You must connect the power adapter to recharge the battery.

• Satellite Pro M10 does not start

  My M10 Pro Sat will not start.
  Power cable shows a green light and a light orange constant and nothing else, but does nothing when the network is not pluged.

  Any suggestions? With our thanks.

  I put t know if this will help you, but what you could do is the following:
  -Unplug the power adapter, remove the battery and wait about 30 min
  -then reconnect the two parts and check to see if you can power the laptop

  It helped me in the past and maybe it will help you too.
  Otherwise:(bien, puis vous devrez contacter le technicien de l'ASP pour la vérification de l'ordinateur portable)

  Welcome and good luck

• Satellite Pro A120 - does not start with 4 GB of memory

  Hi all

  I'm new here so please be gentle!

  I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

  Where I'm going wrong? This model will not take 2 GB memory modules?

  Any advice will be appreciated.

  Best regards

  Dr. Feelgood

  Hello

  Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

  Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

  So please bring back the memory modules and buy 2x1GB. It will work.

• Satellite Pro L50 does not start with 8 GB

  I have a brand new L50 Pro of Satellite (PSKK3A-001001)

  Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
  I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
  The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
  He also said DDRL, which I assume is the correct type.

  The 4 GB mark was Hynix and the 8 GB is Apacer.
  Anyone have a resolution on this or know what the problem is?

  On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

  According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
  Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?