Satellite Pro 6100: error message - cooling fan does not work

Similar Questions

• Satellite Pro 4200 overheating because the fan does not work

  I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

  Hello

  And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
  By the way: did you clean the unit and remove the dust?

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• ERROR MESSAGE "THE FAN DOES NOT.

  As my system there is this message on the screen-

  "The system has detected that a cooling fan does not work correctly.

  -(90B) SYSTEM FAN

  Continued operation is not recommended and can result in unpredictable behavior that may cause stop randomly, loss of data or damage the system as possible. The system will stop in 15 seconds. To avoid closing and continue the operation, press enter now. »

   

  it's hp pavilion g6 2016tx m Odel

  product not... B3H81PA #ACJ...

  I JUST UPDATED MY BIOS, BUT IT DIDN'T WORK... WHAT CAN I DO?

  Please, try the steps in the following link:

  HP laptops - system of fan (90 b) error message at startup

  This error indicates a problem with cooling fan and urgent attention is required.

• Satellite L505 - 10 X cooling fan does not work

  Dear friends, good computer Toshiba Satellite L505 - 10 X Day.My laptop cooling fan does not work. The CPU temperature is not displayed in the application of PC health Monitor. Kindly guide me to solve this problem, cordially, Siva

  Simply because the temperature is not mentioned in the Toshiba Health Monitor, it doesn't mean, that the cooling fan is not working properly.

  You can hear fan running cooling?
  The laptop is turned off unexpectedly?

  In my opinion if the cooling fan would not properly work, internal temperature should rise very quickly at a critical level... in this case that the laptop must close automatically...

  But if the device does not turn off and if you are still able to use it properly, so I doubt that there is a problem with the cooling module.

• Pavilion g7-1368dx "cooling fan does not work correctly.

  Greetings. I have a HP Pavilion g7-1368dx laptop with Windows 7 I bought in June 2012, is no longer under warranty.

  A few weeks ago he had a thermal cut-out once during use. After cooling, the laptop works very well for a few uses, but then it has started giving the boot warning message, "the system has detected that a cooling fan is not working properly," with an additional indication of the damage if the computer is used in this State.

  I ordered a new fan and succeeded him, and I cleaned the fan grille in the process (although it wasn't very dirty), but I still get the same fan error message. I went to the HP website and saw the suggestion to do a "hard reset", so I did it, but the problem persists.

  I saw another suggestion to try a BIOS update, but I thought that would not be desirable because the fan does not work. Suggest you go through with the attempt to update the BIOS anyway?

  Is there something else I can try before ordering a new card system?

  Thanks for your help.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you are having difficulties with regard to your laptop cooling fan
  We will surely help you with this

  According to the message that you have posted, I suspect that it is purely a matter of material where in your message 'System Fan(90B) - the system has detected that a cooling fan does not work properly' get. It is a mechanical failure and fan cooling of your laptop and must be replaced before the laptop starts with an overheating problem.

  Causes/reasons for this problem:

  1. sometimes, it's just because of the dust, animal pet hair slows down the fan

  Perform the illustrious below troubleshooting steps:

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now please wait unit loads Windows and then stop the Netbook again

  Step 09. You need to clean all vents and openings that are really good with a can of compressed air

  Note: If you still get the same error, we need to replace the fan

  I highly recommend you Contact HP technical support immediately by phone to get help immediately to get your fan replaced and serviced by an authorized HP Certified Engineer Netbook

  Click on the link to check the status of warranty below
  http://tinyurl.com/6cf8qju

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• My HP laptop cooling fan does not work.

  Okay, so. I have a HP Pavilion 1145sg g6. It worked fine all morning, and then I put sleep temporarily (about ten to twenty minutes). When I went to turn it on, the screen was black and he said something along the lines of

  "the system has detected that a cooling fan does not work correctly. Suite operation is not recommended at this time... may result in unpredictable behavior that may result closed random, loss of data or damage the system as possible. »

  Then after a few seconds it stops completely. There is an option to continue with the summary of the system and I clicked once on it, but she didn't go through completely for allowing me to use my laptop properly (I arrived at my wallpaper and it stopped).

  This has never happened before, and I never had any problem with my laptop, like this before. I have had him since last August, and it worked pretty well through until today. Of course, the system sometimes, accused but nothing serious, for the most part just aggravating.

  How can I fix?

  Someone said here that they stung the fan with a hairpin and it started working. I took a toothpick and switched my laptop and tried to move the fan and the fan started WALLA on! I noticed that a lot of dust in there and that's probably the culprit first event hough I keep this laptop clean every day, this darn dust is sneaky and small. If you use a toothpick, make sure not to break anything especially the toothpick. last thing you want to do is cause more harm. Now that I think I don't remember when the last fan worked and if it wasn't for the message that popped up today I would not of the same notice I wasn't to hear the fan because last week I said "wow is not the substance of this portable super hot feeling", but I just thought that my fiance was simply playing games on the computer for too long and that's why he was hot. He never closes the computer off smh. in any case, I'm very happy I read this post of a person using the PIN to hair. That's what forums are all about. Help each other. I hope it works for you. Be gentle, try pushing the way fan propellers in clockwise. Use a flashlight to see if dust or anything like that is by the way to allow the fan to run its on.  I blew in the vents, but it did have almost all of the dust of the road.  All of these messages, it seems this is a common problem. Good luck

• "cooling fan does not work correctly.

  Product name: HP Pavilion dv6 Notebook PC

  Product number: LZ801PA #ACJ

  Operating system: Windows 7 64-bit

  Erroe message:

  "The system has detected a cooling fan does not work correctly. . Continued operation is not recommended and can result in unpredictable behavior that may cause stop randomly, loss of data or damage the system as possible. The system will stop in 15 seconds. To prevent stop and continue the operation please press enter now. »

  OK, now, I cleaned compressed air fan can now issue is completely resolved and my laptop is like as it should. I ask to do something else?
  I mean I don't want my internal parts of the laptop to be defective.

  http://compareindia.in.com/specification/laptops/HP-Pavilion-dv66115tx-lz801pa/238232

  Try a hard reset as follows:

  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button
  
  Please post here your positives or negatives in your thread.

  Best regards
  ERICO

• Cooling fan does not work on Satellite Pro A300

  Hello world

  I was asked by a friend to repair their Satellite Pro A300, because their CPU cooling fan had stopped working even during the start of the POST and the laptop could overheat and shutdown. So I thought it might one of three things:
  # Fan is obstructed by dust or dirt
  # Rolling fan failed
  # Fan power cable was loose

  So I disassembled the laptop and cleaned the fan/radiator with compressed air and check the connection of the supply, which was solid, but this does not solve the problem, so I replaced the fan and the heatsink with another that I knew worked from the same model laptop that had a motherboard fault due to the bug of password to start random bios (out of warranty) but still no joy.

  I'm starting to believe that the fan was perfectly fine rather motherboards temperature of the processor or the sensors that control the activation of the fan has failed.
  Am I correct in thinking that it is essentially, irreparable without specialized tools and my friend will be content themselves to turn the system off each hourish or is there something else I forget?

  Thanks for any help.

  Hello

  I m not a technician, but for me, looks like the fan connector is working properly if you already replaced the fan and therefore, it would be necessary to replace the motherboard

  That s all I can say about it having a look for second mainboard or laptop where you can get a motherboard cheap. Maybe it works. :)

• Problems with Satellite A300-1 b 0 cooling: fan does not stop

  Hello users,.

  I m new on Linux and Ubuntu, I installed ubuntu 8.10 last week;
  All things are ok, ok start menu because I have XP, network ethernet connection and wireless, updates ok, ok packages!
  just one thing that make me "' it's my laptop fan, I explain:
  He turned on since I have connection ubuntu and it will be off only when that I disconnect "shutt down" my laptop, so it never stops until the

  the use of ubuntu, because with xp there start but if the processor is cold it is stop! and restart and etc...

  So if anyone has an idea, you are WELCOME!

  My laptop configuration:

  Satellite TOSHIBA A300-1 b 0
  Processor: core 2 duo T8100 2 .1GHz of
  RAM: 3 GB
  SATA hard drive
  Marvell Yukon 88E8040T Ethernet
  Intel wireless

  and I have the patched with the latest bios of the toshiba site
  Date of the bios 07 2008 v3.7 blistering

  > The use of Ubuntu, because with XP there start but if the processor is cold it is stop! and restart and etc...
  If I understand correctly using the Win XP the fan does not always with some breaks. Is this good?

  This isn't a problem but a friend feature.
  As you know the GPU creates a lot of heat.

  This is why it is important that the fan is way on and to cool the GPU or CPU if the temperature reached and some point.
  I put t know what temperature must be reached, but it cannot be too high due to overheating problems.

  Second graphics driver Toshiba control the performance of GPU and the dissipation of the heat too. If the temperature rises to a critical level (applications executing heavy performance) the diver decreases performance to ensure that the heat dissipation would come down.

  But this happens only if the cooling module will not be able to cool the internal temperature.

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Satellite Pro A60: TV S-VHS on does not work

  I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

  I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

  I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

  Best regards!

  Hello

  You should also check the TV settings. You must choose the right channel.
  As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
  If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

• Satellite Pro A120: DVD/CD-RW drive does not work

  Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

  Have you tried the Device Manager and it says it works normally!

  Any ideas please?

  Thanks :)

  > apparently it has been disabled somehow
  I put t think that the disc has been disabled!

  How someone or something should turn off the drive? You have disabled the drive? I don't think so!

  You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
  You are getting error messages or what's wrong?

  Perhaps the reader can read or burn CDs or DVDs.
  This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

  Maybe the replacement drive is required!

• Satellite Pro L20-212 - USB 2.0 does not work

  Hello

  I own a * Satellite Pro L20-212 *, * Windows XP (SP2) is installed, but USB2.0 does not work *. I see nothing on USB 2.0 in the Devicemanager and the speed of the USB 2.0 devices attached is at the level of the USB 1.1.

  I don't know what information is needed to help me with this problem as it should normally work on my laptop (and I know that the laptop has USB 2.0 ports).

  What I have to install a special driver to use USB2.0 or is there any software on my laptop that I need to activate?

  Thank you very much
  Frank

  Hello

  Did you install the image on the Toshiba Recovery CD? This image contains the Windows operating system, Toshiba drivers and additional utilities. After installation, everything should work fine, and also the USB ports should work also.

  The USP ports, you can find in Device Manager in the serial BUS controller universal section. Open the tree and check if there is some yellow exclamation points.
  Then try to remove the Device Manager, the controllers and the USB hub and restart the laptop. After restarting again the OS should recognize USB controllers deleted again.

  I hope that this accelerated procedure will help you.

  Greetings

• slow boot with an error message after + "entry" does not work

  My Firefox opens not instantaneously, but after awhile, it displays a message that one of the scripts have dropped with options to continue or stop the script. After the opening of the main window there is a message that Firefox is unable to open the toolbar. 'Enter' does not work in the address bar after this question.

  Screenshot of the message: http://i1176.photobucket.com/albums/x322/mveits/Firefox/Capture.jpg

  I'll add more information on request.

  It is also indicative of a problem with an add-on. Use the method in the link I posted above to identify what is causing the problem.