Satellite Pro 6100: modem is not detected

Hello

Windows XP does not detect my modem.

Driver downloaded from the toshiba Web site, instaled it and still not found modem.

Any ideas?

Thank you

Hello

In my opinion, there is hardware failure. The best way is to contact the Service of your country partner. They allow to check the unit. For the moment, you can try using an external modem. I don't know that one of your friends can borrow you a.

Visit the Toshiba page under http://eu.computers.toshiba-europe.com. Click Download & support and you will find a link to the list of service partners.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite Pro 6100 Modem does not - No Dial Tone

    Hello

    I'm in terrible trouble. I have a big meeting Friday and discovered that the internal modem on my Satellite Pro 6100 does not work. I downloaded the drivers of software Modem since the support site, and the installation seemed to go OK. There are no conflicts listed in the Device Manager, and when I query the modem to in the properties of the modem (from the control panel), it seems question OK too, but...

    HE DIDN'T THERE WAS NO DIAL TONE!

    I don't know that it is connected to my phone OK. Instead of a tone, I hear a loud hum, with a series of clicks. I can't hear being composed either DTMF tones, even when I disable "wait for dial tone. This behavior is the same if the modem is connected to the phone line.

    I have a big rally Friday and will need this modem to work... any help would be much appreciated...

    Thank you

    Matt.

    Hello
    that doesn't sound so good!

    The measure where I read that your ad you´ve checked your system almost all.

    Right on the thing, have you installed a firewall or other programs to check system that denied access to the modem?

    It is also ok, you should let check your laptop on a faulty Modem.

    Good bye

  • Satellite Pro C660-1NQ does not detect the WLan network

    Hi guys,.

    We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
    I checked the Device Manager and the wireless card does not show here.

    I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

    Any ideas as to what I can try next?

    See you soon,.
    Ash

    Hello

    It seems that the laptop would support the Wlan Atheros 802.11agn card.
    Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
    If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
    I hope this helps to detect the WiFi chip!

  • Satellite Pro L300 - HDD is not detected

    My Satellite L300 hanged while I used it. I tried to restart, it just wouldn't start. It shows this message on the screen "no bootable device-insert boot disk and press any key" tried, but it still does not work. Then I tried using the restore disc. It then displays a message on the scree that the hard drive is not mounted which means that it does not detect the presence of the HARD drive.

    What can I do?

    Hey,.

    This looks like the HARD drive is not recognized, so your computer isn't able to boot and disk HARD recovery doesn't work correctly

    I recommend you check the BIOS if the HARD drive is recognized correctly. Usually in the BIOS, you should see the correct HARD drive model number and it would mean recognized s. Otherwise, the HARD drive is faulty and must be replaced

  • Satellite Pro P100 - SD memory not detected

    Hi all

    I have a satellite pro p100
    and recently installed vista
    The sd slot is installed correctly on the Device Manager, but nothing is coming when I insert an sd memory card
    not even the reader saying 'nothing to.
    They appear on the Device Manager and it says "installed correctly."

    This same sd slot works fine on XP

    I tried to installed the XP drivers but, nothing seems to change
    I tried the 2 drivers in the list of vista, but they seem to be for the formatting and starting

    I'm starting to wonder if you can really read a memory card on vista?

    Thank you all

    Hello

    It seems that you are alone with this problem. is it possible to test it with other compatible maps?

    You have installed everything according to instructions facilities including Quick Fix Engineering version 92.81.90 document?

  • Satellite Pro 6100 keyboard does not work properly after repairs

    Hello

    My 6100 Pro Sam just being away from usual mother board and power Board replacement with Toshiba, but now I have a strange keyboard problem.

    When I turn it on, all the keys are working. After a few minutes, '3' is not working, then 'r' fails, then '5', ' 7 ', ' 8',' 9 ', ' 0' to stop working. At this point, I can feel something very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with the internal keyboard and an external keyboard to the PS2 is still defective (some keys work, others do not), but the outer one works properly.

    Now, if the pc has not obtained if hot as the middle of the internal keyboard, then, I would conclude that the keyboard was defective, but for his failure, slowly and sequentially like this and it fails at the same way every day (since Toshiba rebuild it!).

    Perhaps, internal keyboard controller overheating?
    Anyone know what this could be? :-(

    See you soon,.
    Homer

    Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs on the same map). It is normal that this part become hot during use.

    It is strange that your problem appears after a while and not immediately.

    It could be just a bad relocation of the keyboard cable (it's a thin layer as a movie negative photo) which easily appears there, but... it may be something more serious, too. (Especially since you had done upgrade where the material had to be changed)

    I consult the service centre once more and ask for instructions how to deal with this. Do not ignore it (using an external keyboard instead of internal dysfunction) because he could end up in something more serious soon...

    Concerning

    chain

    P.S. Please keep us updated on your efforts

  • Satellite Pro A10 - Modem does not

    I recently reformatted my laptop using recovery discs. The internal modem does not work. It is recognized by the computer, but I get the message "the port that the modem is attacahed to could not be opened." This can be the result of a hardware conflict"when I query the modem in Device Manager. Also, in the Device Manager there is no indication of being recognized COM port. What can I do?

    Hello

    First I recommend you remove the modem from Device Manager, and then reinstall the modem driver.
    It is not necessary to assign any COM ports manually. After installation of the modem driver all have to be configured automatically. Do not forget that you are using the modem driver good for the country where you live.

  • Satellite Pro A60 - HARD drive not detected by BIOS

    Hi all!
    I received a Pro (PSA65E) Satellite A60 for free... because it has a bug! But I want to fix it and use it.
    Problem is that the HARD drive is not recognized by the BIOS. Strange enough, it is possible to format during the initial phase of an installation of the OS from scratch (I tried with Win XP and Win 2000), but facilities do not proceed any further because it won't start HD. If I try to install a time shild, he can't find some data already present in the HD and gives warnongs... which means that it is also possible to write to the disk.
    The BIOS screen shows: no drive.
    CD-ROM drive is OK, shown as secondary.
    I also look in the forums to nothing does not.
    Actions taken so far:
    * flashed the BIOS, now at version 1.90
    * Replaced the original HD (Toshiba, 40 GB) known to be good, by another more small (Toshiba, 30 GB)
    * Tried to remove the drive CD and checked BIOS recognizes, it has been removed and recognized it even when delivered. The same manoeuvre with the HD does not change the BIOS screen: he says still 'no drive '.
    * Tried with the BACK of Partition Magic version: it says "no disk found. Same thing with the backup came with the PC disks.
    Tried other stuff found in Fora them: remove all the power sorce, let the PC for a few minutes... open and checked for visible problems in the area of the disc HARD and so on.
    Any suggestion would be appreciated!

    Thank you
    aurcri

    Have you used the default settings for the BIOS settings?

  • Satellite Pro 6100 Wireless does not work after restoring from HARD drive

    After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

    Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

    I have found some drivers Agere, but am not sure

    (1) if they are correct
    (2) how to install since the machine works in a way limited with the card in place.

    Any advice?

    Hello

    I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

    (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

    (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

    But this is only possible if the windows started successfully

    PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
    I discovered that you need to update several utilities if you have installed SP2 on this laptop.

  • Satellite Pro 6100 system does not start

    Hi people,
    I have the following problem. I used my laptop long enough for thet to deplete battery and the device to go into hibernation. Given the againm battery costs, I tried the system and now it does not start.
    The leds light up fine and stay lit upwards. Just nothing happens, the FN key works. After a minute the fan will start to turn upwards and turns down again. But nothing else.
    After some time, by pressing the power button for a few seconds seems to start the machine, but it stops immediately after 30 seconds. Even if doing a memtest.

    anyboy has any idea what could cause this. I tried to remove the hard disk and start it does not affect what anyone, as does move the RAM module in the other slot. Also remove the CD/RW drive does not affect it. Remove the battery and start also give the same result.

    Hello

    Sorry, but tells you don't know is not enough for me.
    If you start Notepad, you see something on the screen?
    A Toshiba start screen appear?

    You suggested that the FN key works. Have you checked it in windows?
    AFAIK the FN keys can work only if the operating system has been launched and the drivers have been loaded. So my strange question.

    The whole thing is very strange. If nothing is displayed and the laptop cannot start, so I guess a hardware malfunction. But you know without any trial it s not easy to say what's wrong.

    Try to disconnect the laptop from the sector and remove the battery. Wait several times (30 min - 1 hour) then plug the AC adapter and try to start it.
    If it won't work and you know that other devices are ok such as RAM or HARD drive so I think that the technician must check the machine.

  • Satellite Pro 2100: DVD - ROM not detected - need drivers

    Hello
    My DVD ROM disappeared also from 'my computer' and in the Device Manager.
    Where can I get a driver for the standard DVD ROM?
    Computer does not see the disk, how ' do it see the player "so that I can install the driver?

    All the words of wisdom?

    Hey riri,.

    Check in Device Manager to see if your DVD-ROM is listed and if so was it an exclamation mark against it? If it is, then simply remove it from your system and restart. Windows will identify as a new device and install with the correct driver.

    It is also possible that the drive may have 'disappeared' If you have recently removed any software DVD. It is a known issue and a solution is described in the following Microsoft Knowledge Base article: -.

    http://support.Microsoft.com/kb/320553/en-us

    Kind regards

  • Satellite Pro 6100 - how to change the date and time in the BIOS

    Hello

    I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

    When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

    I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

    How can I change or update the time in the bios?

    Thank you

    Hello

    I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
    You can activate Windows by phone?

    Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
    Usually in the configuration of the BIOS you will find a brief info how changing the values.

    Check this box!

  • Signal not detected on Satellite Pro 6100 wireless

    I have two laptops Satellite Pro 6100, two of them are configured to automatically connect to our local wireless router which they both started.
    A computer is used by myself by my wife; bookmarks, email accounts and so on are different on every computer/hard drive.

    I have problems with one of the computers (mine) - the usual problem with multispindle connectors on the video boards and feeding, then I tried to use "his" computer with 'ma' machine's hard drive.

    His machine does not recognize our LAN with my hard drive installed. He came up with a new network found, but not a wireless network. Also, with this machine and my hard drive installed, can't the machine to search for wireless LANs, the icon does not appear. The switch is turned on for wireless signals and it works very well with his hard drive in it. The network is protected, and the two machines have the same id in them for connection which work fine in the original engine.

    I don't really understand this condition. Something in the bios? Something on my hard drive that is not recognized by the computer? the wrong phase of the Moon?
    Suggestions how to trouble shoot and fix this?

    Both machines are XP Pro on them, latest updates.

    Hello

    Also AFAIK, Satellite Pro 6100 was equipped with different Wlan cards so if use different HDD with different driver then the Wlan card could not be detected by Windows XP.

    Check if the wireless adapter is listed in the Device Manager and recognized correctly.

  • A Satellite Pro 6100 graphics card does not work correctly

    Hello!

    I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
    I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

    Now my questions:
    1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
    2. How can I do this, is there some tutorials, especially for my laptop?
    3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

    I thank very you much in advance!
    Lukas

    Hi Lukas

    The led flashes as it provides a microcode error!
    This is especially if the malfunction of hardware has been detected.
    I presume that the replacement of the graphics card is the reason!

    As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
    Looks like that the BIOS cannot handle this new graphics chip.

  • New on Satellite Pro 6100 WLAN card installed, but can not be activated

    Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".

    I tried upgrading to the latest version of BIOS
    I reinstalled the latest drivers
    Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
    Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.

    Past and present, wireless card fail to see any network.

    Martin

    Hello Martin

    This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.

    I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
    What do you think of this?

Maybe you are looking for