Satellite Pro 6100 often randomly turns off and bad RTC error

Similar Questions

• Satellite Pro A60 has just turned off and won't come back

  My Satellite A60 laptop just turned off and will not go there is nothing no sound no lights nothing.it ran on sector when it happened.

  any help apreciated

  Hello, Heidi

  Remove the battery, connect your laptop adapter only and try starting your laptop running. When the laptop boot and OS is fully loaded, wait a few minutes and reinsert the battery.

  If everything is OK look carefully if the battery will be charged correctly and when battery LED is green (fully charged battery) try to turn off your laptop as usual. Turn it back on and carefully monitor what is happening exactly.

• Satellite Pro A30 is randomly turn off

  Hello

  I have a Satellite Pro A30 and from time to time it just turn off. It happens to any application that I use. It will then restart and on my desk, I will get the message that my Active Desktop was stopped unexpectedly and asks if I would like to turn it back on. I noticed that it does appear that this operation when the power supply is connected.

  I can't be sure if it happened only when he has worked outside the network, but I'm starting to think it is. The charger seems to work fine though as it loads fine and power mode changes when it is plugged.

  Any help anyone can give would be greatly appreciated,

  Thanks in advance,

  Babin

  Satellite Pro A30 is quite old and probably you have not cleaned up until now. If the unit tips suddenly OFF, independent, running application it may be due to overheating.

  It is possible the unit turns off often when it is connected to the power running, because in this case, the standard profile in power management is full power. Power supply battery, CPU activity will solve automatically on the lower level and maybe you can do a little bit more.

  In any case, I recommend you to clean the unit and remove the dust. You can try to do this alone, but I recommend doing it on the professional way but you can make a decision how to proceed.

• Portege M400 randomly turn off and restart

  Hello
  I was wondering if anyone has any suggestions on what's wrong with my laptop? Two days ago began to randomly turn off and restart. I checked the following:
  -Execution control online Panda Security virus etc - all ok.
  -Check the system of newspapers but all it records is an error "windows has stopped unexpectedly".
  -Suspect an overheating problem I took it to pieces, clean all the dust from the fan and the heat exchanger. Also cleaned up all the old thermal paste off the CPU and replaced with new ones. It works now much cooler but always stops at random.
  -Run a Suse Linux Live DVD to check, it certainly isn't a problem with the OS and it stops again.

  I'm guessing that something is short circuit on the motherboard because it will run ok if it is on a flat surface and not moved and I do not press too hard while typing etc. However, it is a bit hit and Miss. If someone has had this problem before and there at - it something else I could try? Also any ideas on is how a new motherboard? I expect probably expensive :( If there is any kind of fix I can do myself? I'm pretty technically minded and do not have a problem with taking it bit do not know much about electronics, engines are more my thing :D

  TIA, Firedrake

  PS The laptop model number is PPM40E running Vista Business.

  Hello!

  I m not an expert in laptop but in my opinion, it sounds like a hardware malfunction. The reason could be a faulty motherboard or something else.
  I mean you already tried Linux bootable disk, so I think that the problem is not bound by the OS.

  I put t know how much a new card mother cost and if it s difficult to Exchange or not, but you should contact the nearest ASP that you can find on the Toshiba site. The laptop technicians can check your laptop and order a new card of mother.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

  Hi all

  I'm new to this so hope I'm posting in the right place.

  I have the laptop above Satellite Pro 6100 and am having some problems that I hope that you guys may be able to help me with.

  The first problem is that the battery is fully charged, but the icon on the screen says 0%.
  He fled feeding okay and if you disconnect battery lasts for all time and a half.
  If I try to defrag it does not have enough power?
  So I have to defrag in safe mode.

  The other problem is that the mouse disappears off the coast of the right side of my screen and it takes forever to find him!

  Would appreciate some advice or solutions like like the laptop and not really wanted to get a new one at the moment.

  Oh am running windows at home.
  Thanks in advance.

  Eve x

  Update the BIOS and set the default values.

  You could try reinstalling the common Modules for Toshiba and energy savings.

  If all else fails, there is the opportunity to back up your data and run recovery. If it happens again on a new installation of Windows, it may be a hardware problem.

• Satellite Pro 6100 will not turn on - flashing LED

  Hello

  I have a probelem big, my Toshiba Satellite Pro 6100 lights so I decided to buy a new motherboard @ ebay.

  I have to build in and all I get is an orange error code. So I decide to make me buy a testet PCB (Powerboard) on Ebay, then the same thing! Then I bought a second Geforce but the same error code! So I all exchanged but the processor and I'm ascendant to buy a second to test or do you know Whata´s evil?
  I don't think that the new parts are broken!

  The error, the code of the orange Led is 01000011 or short, long, short, short, short, short, long, long and I did not see what maybe the problem!

  Sorry for my broken English I come from Germany!
  Hope for answers and greetings

  problemman

  Hello

  How do you know what the flashing of led said you? You are a sort of technician? How can you know that the "blink" (long, short) are 0 and 1.
  Do you know how to assemble the circuit board and don't you know that the things you have take care? Who PCB´s that you have exchanged?
  You said:

  Hand and VGA

  but the powerpcb too? And how do you know that the PCB´s are ok? Because why someone is selling you that with the 'work' of description?

  Would appreciate some feedback from you

  Welcome them

• Satellite Pro 6100 - Question on WLAN adapt and mac address

  I bought a second hand of Satellite Pro 6100. It has a WiFi adapter. It is where and how do I know the macadress of the adapter?

  Thank you.

  Hello

  If you are sure that this laptop was equipped with the Wlan card, and then the MAC address can be easily discovered 100%.
  You must start the console with the command: * CMD *.

  Then use the command: * ipconfig/all *.
  This would list all the details on the WLan/LAN cards installed in the laptop.
  The physical address means MAC address ;)

  This should help!

• Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

  Hello

  Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

  I have a Toshiba Satellite Pro L670.

  Even when the sound in Windows is turned off the laptop do a annoying sound.

  Thank you!

  Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

  Do you really want to work until the battery is completely discharged?

  Anyway, AFAIK this notification level BIOS cannot be disabled.
  Let's see if someone else is better informed than me.

• Satellite Pro L300 - PSLB9E - cannot turn off wifi except for by Win 7

  I installed Win7 64 bit with a custom installation (replacing 32-bit Vista). I have updated all drivers (to my knowledge) and BIOS to 2.1. The wifi is always enabled, any position of the switch on the front or the combination Fn + F8. I can unplug a wifi service in the network Panel Win 7. This may seem like a good problem to have, but the power gets used when on battery. Obvious pointers? I can't follow up? Thank you very much.

  You can likely install toshiba value added package for win 7 if it is available.
  I also have the same problem with mij L40 pro and value pack for Windows 7 will not install on my laptop.
  Maybe it wil last updated in the future.

• Satellite M30X-129 don't turn off and turn on properly

  My computer just start stop whenever the computer gets tilted but does not shut down correctly, the power button is always on and it's not always properly when you try and put it back under it the POWER lights but the hard drive does not start.

  Any ideas that don't involve pay someone SEPARATE it * g *.

  Have no idea why this happen, but try to use your laptop without it tilted. Maybe the HARD drive react to this topic.

• New on Satellite Pro 6100 WLAN card installed, but can not be activated

  Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".

  I tried upgrading to the latest version of BIOS
  I reinstalled the latest drivers
  Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
  Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.

  Past and present, wireless card fail to see any network.

  Martin

  Hello Martin

  This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.

  I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
  What do you think of this?

• Satellite Pro 6100 memory upgrade

  I don't have a model of toshiba satellite pro 6100: PS610L-04NVN of Singapore and it currently has 256 MB of pc2100 memory installed and I am wanting to install another 256 so I have 512, but now I would like to know:

  1. If I get the memory of a vendor of kingston, it'll work with this laptop, it is has 2 different types of memory, because there KTT3311 (333 mhz) & KTT3614 (266 mhz)?

  Hello

  The memory module manufacturers are not very important. But of course the modules of memory "no name" performance not as good as other modules such as Toshiba or Kingston.
  Module properties are very important. This unit uses PC2100 DDR - RAM modules.
  I found compatible modules:

  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

  If you use the same modules and only the speed is different so the laptop will use support at reduced speed.
  In your case a module supports and other at 266 MHz 333 MHz. The laptop will support at 266 MhZ.

• Satellite Pro 6100 turns off when I connect the power adapter

  Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
  Any ideas would be appreciated

  see you soon

  Hello

  You use original Toshiba AC/DC adapter or another?
  What happens if you connect the AC/DC adapter, while the laptop is turned off?

  It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

• Satellite Pro 6100 himself turn off

  Hello

  I'm from the Italy. It is 3 days that my Satellite Pro 6100 after some time (it can be 30 minutes or 3 hours) close itself.
  I tried to update bios version 1.70 to 1.90 without any result. I tested my HARD drive and it works fine. I formatted and reinstalled Windows XP Home SP2 Pro edition but the problem that it is still there.
  When it crash, reboot, it seems 'BAD RTC BATTERY' and "BAD CMOS", I have to press F1, then I exit without changing anything.

  I saw that 3 weeks ago appears at the beginning of this message: "PXE - E61 MEDIA TEST FAILURE CHECK CABLE"and"PXE - MOF OUTGOING INTEL PXE ROM" but works laptop well until 2 days ago.

  I don't know why, but every time I restart now stop when WINDOWS XP is on the window (not the first logo on page WXP black) cyan, but the second on the window cyan; can do work that I have to press CTRL + ALT + CANCELLED and it go to the desktop.

  I don't know what to do? Center of Toshiba, it is far from my town, if you can help me will be appreciated.

  Sorry for my English, I read a few post but exactly with my problems, there is no job.
  Thanks in advance, it's a great laptop I jump to save it.

  p.s. There is no dust on it, I tried to lift the keyboard to clean, but it was already clean, even behind the fan.

  Hello supertraz,

  On 6100 laptop there is a soft spot between the control panel and from the motherboard, causing this malfunction. You will not be able to solve this problem simply raise your keyboard and blowing air into your laptop.

  A good description on this problem (I had, too) can be found on this forum posted by user seintaxx here:
  http://www.eXpansys.com/ft.aspx?i=104221&thread=7

  A photo of the defaulting party is here:
  http://img204.imageshack.us/img204/3/sp6100fixby1.jpg

  Good luck with it.

  Kind regards
  chain