Satellite Pro 6100 - Question about 420 GB NVidia

Similar Questions

• Satellite Pro 6100 - Question on WLAN adapt and mac address

  I bought a second hand of Satellite Pro 6100. It has a WiFi adapter. It is where and how do I know the macadress of the adapter?

  Thank you.

  Hello

  If you are sure that this laptop was equipped with the Wlan card, and then the MAC address can be easily discovered 100%.
  You must start the console with the command: * CMD *.

  Then use the command: * ipconfig/all *.
  This would list all the details on the WLan/LAN cards installed in the laptop.
  The physical address means MAC address ;)

  This should help!

• Satellite Pro 4600: Question about upgrade RAM, CPU, motherboard

  Hello

  I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...

  Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
  I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
  But someone has tried successfully to put in PC133 memory? And if so, to were the limit?

  And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
  Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
  Or would it be easier to exchange the whole motherboard?
  I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...

  I would be delighted if someone could give me some positive feedback on these issues...

  Hello

  You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
  If you use 133 Mhz modules, they will work only at 100 Mhz.

  You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28447&ft=m&St=3

  Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard

  Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the

• Satellite Pro A10: Question about upgrade HARD drive

  I want a bigger hard drive, but xp home edition preinstalled. If I change the hard drive I don't think that the recovery disc would work to re install xp. How can I do this without having to buy a new version of windows? Oh, it's a portable satellite pro spa10.

  Sorry, but why you are suggesting that the recovery CD will not recognize the new HARD drive?
  The fact is that if the BIOS will recognize the new HARD drive then you will have no problem for the recovery and the installation of the OS.

  If you want to upgrade the HARD drive, you must use a compatible. Then everything simply initialize-towards the top of the recovery CD and the operating system will install on the new HD disc.

• Satellite Pro L10: Question about saving the files on a CD

  Please can someone tell me how I can save a typed document (produced in Word or similar) on the CD? I don't have a floppy drive on my satellite pro L10 portable. Have 'saved' music using the immediate recording before, but now need to record your actual work on the hard disk for transport to a pc with access to a printer.

  When I tried it told me incorrect function, contact administrator (that's me!) I tried CD - R and CD - RW discs and neither would not let me save the file on it. would be grateful for any advice regarding this.

  Thank you

  Hi Roy,

  First of all, you will ned to ensure that you have enabled logging on oprical drive you. For this a right-click on the CD-ROM in my computer icon and then selecting "properties-> recording. Make sure that "Enable CD writing on this drive" is checked.

  Once you have done the above, you can simply drag the documents that you want to copy on the CD-ROM icon in my computer.

  Note that the burning process does not happen immediately. Windows caches the files to be placed on your hard drive first and then you can burn all documents cached only once.

  Alternatively, you may find that some third-party software has been bundled with your portable computer, which performs a similar function the standard Windows CD burn software.

  Kind regards

• Satellite Pro A100: Question about vertical resolution

  Hello
  I just bought a Satellite Pro A100 a few weeks ago. I'm pretty happy with it, with the exception of the vertical resolution. I'm used to the small fonts and large resolutions. Well, it seems that the A100 is not capable of displaying more than 800 pixels vertically. Is this true?

  How can I run a vertical resolution greater than 800 pixels visible?

  Best regards
  George

  Hi George,.

  I think the A100 supports a maximum resolution of 1280 X 800 on its internal screen but can support a resolution of 2048 X 1536 on an external monitor attached.

  I don't think that you will be able to achieve a vertical resolution higher than 800 on the internal display.

  Kind regards

• Satellite Pro A10: Question about upgrading video card

  Hi guys, I have a laptop Satellite Pro A10 and I was wondering if anyone of you could help me.

  I want to improve my Ram card memory and video. The video card now is an Intel 82852/82855 GM/GME Graphics Controller and want a graphics card with at least 128 MB of memory on this subject.
  Any recommendation?
  Any help would be appreciated muchly.

  Hello

  It of not possible to change the graphics card. The graphics card is a small chip that attaches to the motherboard.
  This graphics card supports up to 64 MB shared memory. The graphics card gets this value of main memory if it s needed.

  The possibility to upgrade the memory of this device is something different.
  You can upgrade the memory to max 1024 MB (2x512MB) and these modules should work.
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

  Hope this will help a little.
  concerning

• Satellite Pro 2100: Question about upgrade HARD drive

  Hello
  ICH have a Satellite Pro 2100 with a capacity of 40 GB HDD. Now I want wo upgrate with a 100 GB or 120 GB HARD drive. Is it supported? Where is the upper limit of the capacity of support? Is there something I need to look out? Are there special attributes that am I looking for?

  prior to thank you for your support

  Hello

  It is very unlikely that the 100 or 120 GB HARD drive works.
  I guess that the BIOS will not recognize these hard disks.
  I don't officials documents found on the hard drives supported, but I think that the 60 GB HARD drive is the biggest HARD drive that works on the Satellite Pro 2100.

• Satellite Pro L100 - Question about BIOS password reset

  Hello

  I have problems with an old satellite L100 to request the password from the bios, which we do not know.

  I saw there are different ways of short connections to work around this problem, but I can't find anything about this particular model and none of the information I've seen applies to this motherboard.

  Can someone please help and direct me to what pins needs a short circuit on the laptop to be able to re - use this equipment.

  Many thanks in advance,

  Chris

  > old satellite L100 asking to specify the password of the bios, which we do not know.

  The password of BIOS bad new buddy is a kind of security mechanism that cannot be removed easily. The unknown BIOS password can be deleted only authorized Toshiba service
  This is why you must contact the ASP in your country to remove

• Satellite Pro 4340 - Question about CPU

  Hi, my problem its:
  -This notebook have usually 600-650 Mhz CPU, but in the information Windows XP Pro system, the result is und 327 Mhz 64 MB RAM

  Und with AIDA 32 program chek the result is 250 MHz (5 x 50).

  I don't understand any more.
  The product standard is around 600 Mhz, or!

  Und for this laptop I have 100 EUROS to pay.

  Thanks for the interested und response

  Hehehe this is a really an oldie I wonder who uses something like that?  :| now in this moment

  I have goggled and found out that this laptop comes with a PIII 650 Mhz CPU.
  Who knows why this processor does not work with a maximum yield maybe the motherboard was already replaced and him correctly DMI was not written in the BIOS or the speed of the CPU was locked in the BIOS or in the Toshiba HWsetup

  But have you tested the speed with other applications? Mayen AIDA 32 program provide results wrong everything is possible!

• Satellite Pro A120 - Question about license activation

  I have run the recovery of product on my laptop and in the Conditions section, I saw something on the mandatory activation EULA license. (Article 13)

  My laptop's for only mathematical modeling, and I don't want to connect to the Internet. Could someone tell me if I'm dealing with clause 13 now, or I am entitled to assume that this step has been supported until I bought the laptop? If I have to deal with clause 13 I have to call the manufacturer and need to find the number.

  You re right, peter1234.

  The activation of the preinstalled Windows version is already made by Toshiba. So nothing more to do. :)

• Satellite Pro A100: Question about RAM upgrade and warranty

  I just bought my machine and Ive decided to install some more ram. No one knows if it will affect my Gurentee. I can't find anything on the Web site on this topic. Should I get a Toshiba to install official repairman or something?
  Thank you

  Hello

  Please check you user manual. Usually, the slot memory must be placed at the bottom of the unit. If you remove the cover, you should see the slots.
  Usually memory upgrade procedure is described in the user manual so you can upgrade the memory yourself and the procedure of upgrading doesn t affect your warranty.
  But please make sure you use the right modules.
  However, you can also contact Toshiba for the upgrade of memory.

• Satellite Pro A10 - question about a location empty in the lower corner

  Hello

  At the back of my machine looking for the back to the front, there is the first Panel to the right of the back that has the fan and processor in, then another in the middle which has a RAM memory. In the right in the front, there is a final, but it is empty, its has two sons, one white and the other black.

  What is this for? This allows to video memory upgrade? If this is not what is happening here.
  Any help appreciated.
  Ste

  I agree with danydemaeseneire.
  This property supports the minPCI wireless network card.

  The two wires must be connected as follows;
  The white cable be connected to the HAND and black to the auxiliary voltage

  Good bye

• Satellite Pro 6100 BIOS upgrade question

  Hello

  I have a toshiba satellite pro 6100 and currently it has 1.60 bios version and saw that the last update of the bios is the 1.90. My question is: is it question where I get the update of the bios of wheather it is from the site of toshiba UK or the United States, is the same bios update, or are they different? The other question is what I have to do the previous bios updates first 1.60 1.70 1.80 and finally to 1.90, or can I just do the 1.90 and who will have the previous updates in that one later?

  Hi Christian,

  I normally prefer to get the update of the BIOS in the same country as I bought the laptop. However, given that the laptop was probably manufactured around the world, I don't think it bothers us really until the update is marked as compatible with your model of laptop. In principle, the update of the BIOS for the components of the laptop and is therefore more linked to the actual model in his country of origin.

  It is not normally necessary load the intermediate versions of BIOS as BIOS is usually not cumulative but is provided as a complete package and includes all the code required.

  Kind regards

• A Satellite Pro 6100 graphics card does not work correctly

  Hello!

  I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
  I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

  Now my questions:
  1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
  2. How can I do this, is there some tutorials, especially for my laptop?
  3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

  I thank very you much in advance!
  Lukas

  Hi Lukas

  The led flashes as it provides a microcode error!
  This is especially if the malfunction of hardware has been detected.
  I presume that the replacement of the graphics card is the reason!

  As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
  Looks like that the BIOS cannot handle this new graphics chip.