Satellite Pro 6100: very slow recharge battery

I bought a new battery pack for my Satellite Pro 6100 because my old Battery Pack loaded very slowly, about 5 per cent in 12 hours. But it turns out that my other one has the same problem.
The problem may be the charger or the laptop.
I already tried to unload the batteries fully.
Can someone help me.

Hello

It is not easy to tell what can be the problem, but if you use the new battery pack and the problem is there, it is possible that electronic power on your laptop is not working properly.

Tags: Toshiba

Similar Questions

  • Satellite Pro 6100 very slow during the installation of Windows XP Home edition

    Hello

    We have installede Windows XP from our CD orig., XP is running very slowly and the mouse freezing of minute-to-minute. We can install Windows 2000 and it works perfectly. Try a new HD with the same problem, it has 512 MB of ram.

    Hello

    As far as I know this device is supported for Windows 2000 Professional and Windows XP Professional. Is there a similar situation when you use the original recovery Toshiba WXP Pro media?

    In fact, do you have a?

    By the way: I hope you're talking about the new installation without specific or additional preinstalled software you need!

  • Satellite Pro U300 very slow opening programs

    Hi all

    I bought a Satellite Pro U300 in February 2008 and I only use it 3 - 4 times since then... It is very slow at the opening of the programs (I have only one statistical program installed) and Web pages and creates problems when I try to download other programs that have a different version of Windows Vista.
    I really regretted buying this phone and I'm looking for someone to sell.

    Until I do, I was wondering if I could uninstall Windows Vista and install Windows XP for example, or do anything else that would make my phone fun to use.

    Anna

    Hello

    The preinstalled operating system ran slowly because many applications are running in the background.
    My laptop was slow too to experience of applications have been disabled.

    You can disable in MSCONFIG.
    Type msconfig window RUN and check the Startup tab.
    You will find the software that could slow down the operating system.

    With regard to the installation of Win XP.
    Yes, you can also install Win XP. By using the Win XP laptop should be little faster because Win XP doesn t need a lot of material resources.

    Welcome them

  • Satellite Pro A100 very slow, especially at the start

    Hi, I just bought a laptop Satellite Pro A100. In general, I'm very happy with it, but I find it very slow especially at startup. It may take more than 5 minutes to be completely started.

    Are there settings or settings that I can do to fix this?

    Hello

    I agree with the previous user of the forum. I often heard that Norton slows down the system quickly. Try to remove it and test it again.

  • Sattalite Pro 6100: Very slow Windows Installation

    I have a series of Sattalite Pro 6100.
    The hard drive crashed, so I bought a new. It is 40 GB / 5700 rpm, so supposed to be slightly faster than the original equipment.
    When I placed it, BIOS did not.
    I removed it, put it back and BIOS saw him.
    I placed the Dutch Windows XP Home CD and formatted NTFS (not fast) HD full.
    After Windows took a good 3 hours to install even though it claims it should be only 39 minutes to begin with.

    The boot until Windows takes a long time.
    Operation of Windows seems slower than what I'm used to, but I have not actually used the laptop (crushed) for 2 months, I can't be sure.

    Any idea?

    David

    Hello

    It is not easy to say what is happening here. Who is the manufacturer of the HARD drive?
    I put t know if this can help, but you can do the BIOS update.
    As far as I know this unit also comes with WXP Pro. If there is no possibility try to install Recovery on that image.

  • Satellite Pro P300 - very slow WiFi connection

    Toshibe Satellite Pro P300 with built in the Atheros AR9281 wireless.

    Running Windows 7.

    ESET NOD32 Antivirus.

    BIOS 2.5

    All the latest versions of the drivers installed including the driver Atheros 8.0.0.225.0 wireless.

    Wireless is annoying...

    Sometimes fails to find the router (Belkin 54g, connected to the Modem cable Motorola (Virgin B/B is the access provider, 10 Mbps)).

    When he finds, connects ok, but sometimes it is impossible to browse web pages - just behave as if there is no connection.

    Bit torrent works also very slowly (in general 0.5Mbit / s depending on the number of peers etc.). Not a port forwarding issue with the router - using utorrent that indicates that the relevant port is open.

    When I connect to the router with an ethernet cable, everything works a treat - much faster and rock solid connection. uTorrent has no hit 10Mbit/s problem at all.

    Any suggestions?

    Thank you very much...

    Alan.

    Hello

    You should first check if your BIOS is up to date.
    If an older version of BIOS is installed then you could update the BIOS.

    It is also advisable to update the installed WLan driver.
    Here, you can check the available WLan drivers:
    http://APS2.toshiba-tro.de/WLAN/

    See you soon

  • Satellite Pro 6100: message "RTC bad battery appears, check CMOS.

    When I move my 6100 SP it freezes, and then when it is restarted the message "bad RTC battery is displayed, check CMOS. I also noticed that when the machine hangs the fan operates at high speed and the bottom of the machine and the keyboard gets very hot.
    Need your advice.

    Hello

    Did you change or replace the RTC battery?
    The error message looks like a death or a bad RTC battery.
    You should try to charge the battery (plug the AC adapter / CC)
    Try to enter the BIOS setup and check all options. You can set the BIOS default settings.
    Check if it helps. If it's not, so I guess there is something wrong with the RTC battery and it should be changed.

  • Satellite Pro L20 very slow to start

    My computer is old enough to start once connected for the first time. I have norton auto-start and think this may be it slows down, but how do I know what other programs start automatically.

    I noticed that there are a lot of icons in my taskbar. Any ideas if its something to do with that or somethine else entirely?

    Hi Julie,.

    There are two possible locations for the tasks and processes to be configured for a start. The first (and most obvious) is in the folder 'Start-up' that you will see if you click on "Start-> all programs. A shortcut to an application placed here will cause this application to start when Windows loads.

    Less obvious place is in the system registry, and it is where most of the assigned tasks/processes will be. The best way to view these is to use the MSCONFIG function (just click 'Start'-> run and then type MSCONFIG in the command line).

    When the MSCONFIG window opens, simply click on the "Startup" tab and you will see a list of processes displayed with a check box next to each entry. You can select any process you want to start (but make sure you do not stop the tasks necessary for Windows or the configuration of your own laptop). When you accept all changes you want to the system will ask you if you want to restart and your laptop restarts then with the changes you have made in force. Note that, after the reboot, you will be informed that the system has started in diagnostic mode to return to normal just relaunch MSCONFIG and on the tab GENERAL, click on the 'normal' radio button

    Kind regards

  • Satellite Pro 6100 - battery acting very strange.

    As mentioned in the title, my laptop battery is very strange.

    The symptoms are:

    When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
    Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

    This reacondioned back to normal battery or is this safe to use battery?
    Thanks in advance!

    Hello

    I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

    But even if the battery is faulty, you should be able to use the device connected to the power adapter.
    So even if the battery is removed, you could power the unit with the mains.

  • Satellite Pro 6100 does not recognize the single battery external power

    Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

    By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

    I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
    Any ideas?
    Concerning
    Phil

    Hello

    Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
    In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
    The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

  • 'Bad RTC battery, check the CMOS' on Satellite Pro 6100

    Hello... I just got a Satellite Pro 6100 and when it is started I get an error message:

    RTC BATTERY BAD
    BAD CHECKSUM (CMOS)
    Check the system. Then press the [F1] key
    _

    I can still use the laptop for about 15 minutes, but then it crashes. I did some research and discovered that it is the power supply Board. But my laptop is out of warranty and the reminder is now officially over.

    Y at - there someone who can help me?
    Thank you
    Liam

    Published by: admin

    Hi Liam

    Hmmm... I think it s not a Council but the battery of the CCF.
    Take a look in the user manual. There you should find something that exactly the message is displayed if the battery RTC (BIOS) is not charged.

    The RTC battery, you must connect the power adapter and should run the laptop for about 24 hours.
    After that the main battery has been charged, then the RTC battery starts to load.

    It will take a little longer.

  • Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

    Hi all

    I'm new to this so hope I'm posting in the right place.

    I have the laptop above Satellite Pro 6100 and am having some problems that I hope that you guys may be able to help me with.

    The first problem is that the battery is fully charged, but the icon on the screen says 0%.
    He fled feeding okay and if you disconnect battery lasts for all time and a half.
    If I try to defrag it does not have enough power?
    So I have to defrag in safe mode.

    The other problem is that the mouse disappears off the coast of the right side of my screen and it takes forever to find him!

    Would appreciate some advice or solutions like like the laptop and not really wanted to get a new one at the moment.

    Oh am running windows at home.
    Thanks in advance.

    Eve x

    Update the BIOS and set the default values.

    You could try reinstalling the common Modules for Toshiba and energy savings.

    If all else fails, there is the opportunity to back up your data and run recovery. If it happens again on a new installation of Windows, it may be a hardware problem.

  • Solution found to the problem of "BAD RTC BATTERY' on Satellite Pro 6100

    Hi, I'm from the Italy.

    I myself have solved this problem without changing the motherboard on my laptop second hand satellite pro 6100.

    for info: [email protected]

    Hello

    may I ask how you solved this? I have the same machine and this error pops up sometimes.

    Welcome them

  • Satellite Pro 6100 stops after 15-30 minutes

    My satellite Pro 6100 Cup after 15 to 30 minutes of operation on power outlet. There is a noise and all the lights go out except orange slow flashing (power problem). I have restore by removing the power cable and wait a while.

    It will then start again. I used two different adapters and two different batteries. It also happens if work on AC with no battery in the. My suspicion is an overheat cut-out. The Sat Pro has a? Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in. Advice much appreciated. Thank you.

    > Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in
    I agree with you and the user SambadeAmigo. It seems like a simple problem of overheating and so the laptop automatically stops to prevent the equipment from damage

    I assume that your laptop can be enabled again after being allowed to cool. It is a common question if the cooling modules may not work properly because of the dust and debris.
    As suggested, it would be possible to remove dust using the can of compressed air.
    It should work.

    See you soon

  • Satellite Pro 6100: cannot get into the BIOS and does not start

    I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

    Press ESC or F8 before to turn usually results in fast beeps sounds.
    Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

    Apart from that I can't really do nothing at all.
    I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

    Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
    I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

    Suggestions?

    Hello

    I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

Maybe you are looking for

  • NB305 - impossible to get a WiFi connection

    Bought a new NB305 today. Set up (apparently) OK, but I can't get a WiFi connection. It recognizes my home network but will not connect. Convenience store etc can not solve.I can connect using a T-Mobile dongle only. The netbook runs Windows 7 Starte

  • Satellite L500 - screen is blank

    Off normally last night, when I turned it on today the screen remains empty. I plugged it up to external montior and that works very well, I have only checked in the Manager device and theres no conflict not showing. The screen is not black, it's lik

  • How can I turn off ringer on Officejet 4620

    I have an officejet 4620 connected to my incoming phone line. When I'm with a client I want him to not ring. I have a machine ansering in the system and taking calls. How can I disable the ring or make her volume 0 Also is there a way to stop the lig

  • Of the EA6300 firmware auto update during installation, no random to WAN WAN gigabit drops

    Really, I just want the previous firmware, it will not return to the previous firmware, even if she has detected a version more recent and downloaded/installed. Possible problem during this update I want to redo, but not possibility because no prior

  • Photosmart 7510 - I want to use only black ink since I don't have all the need for a color.

    Photosmart 7510 - I want to use only black ink since I mainly use this for work and don't have all the need for a color. If I have more ink, can I just replace the black and it still work? Thank you very much for any information you may have!