Satellite Pro A-153 C50: F11 function key does not work

The F11 key where I can spend the sound power switch does not work!
The other keys work correctly.

Everyone knows how to restore its function?

Hello

You use the special function or Standard F1 - F12?
The special mode of operation allows you to use special features without pressing the FN key.
This means that if the special function mode, you must press only F11 to turn the sound on and off. In the case of special function mode is off, you must press FN + F11 to turn the sound on and off.

You can enable or disable the special function mode in:
Office-> Office help (in the task bar)-> tools & utilities-> function key

But I wonder if the F11 key works with other software?
For example: pressing F11 key while using the Internet browser (internet explore) should allow mode full-screen. You can check this?

Keyboard F11 key is maybe defective and so the sound ON / Off function does not work

Tags: Toshiba

Similar Questions

  • Satellite A350-13 a - function keys does not work

    I have the Satellite A350-13. I installed Windows 7 for 2 weeks.

    The function keys does not work although I have installed the Toshiba value added package, which is responsible for the activation of the function keys.

    What the solution to this problem?

    > Function keys does not work although I have installed the toshiba value added package, which is responsible for the activation of the function keys

    Next to the VAP (value added package) you need to install the Flash Utility card support!
    Card Flash utility support controls the keys FN and not the VAP! But VAP is also needed.

    Good bye

  • F4 function key does not work does not in Excel 2010

    I have a HP Pavilion series g - Windows 7-64 bit

    The F4 function key does not work in (2010 excel 64-bit).

    Any suggestions?

    ch1616

    Hello

    It may be useful to change the setting of the fn key in the bios as described in the link below to see if this has an effect on the f4 key in Excel.

    http://support.HP.com/us-en/document/c02035108

    Kind regards

    DP - K

  • HP AC 15-AC122TU: my function key does not work!

    Hi, my function key does not work which is the reason why I could not increase or decrease the volume, brightness etc. I already saw some videos and tried to disable from BIOS. But it's not always works. Can you please suggest any driver for it.

    Hi @soumyajit1991,

    Welcome to the HP Forums! I read your post and wanted to help.

    I understand that the function keys on your laptop is not working. Please try to re - install the HP System event utility: sp76383.exe

    Let me know if it helps.

    If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

    Kind regards

  • Function key does not work do not

    Recently I bought HP 15R laptop 036TU. Function keys do not work correctly. As if, press F2 it adjusts the brightness rather than change the name of the folder. PL suggest what parameter changes are required. Thanks, Nitin.

    Hello

    Please follow the instructions below:

    http://support.HP.com/us-en/document/c02035108

    You may need to use the ESC key on the step #2 (if F10 does not work).

    Kind regards.

  • Brightness function key does not work in my 15-r006TU

    Hello

    My brightness function keys do not work. Other function keys like music player, mute etc work fine in my windows operating system 7. No, my model is 15-r006TU. I installed all the drivers display and checked the key parameters of the action in my BIOS settings. Nothing works.

    Kindly help.

    --

    Nandan

    Hello:

    The Intel HD graphics card appears under the category of display cards in Device Manager or a Standard VGA adapter is displayed.

    Normally when the brightness of the screen is stuck on max and you cannot change it,'re missing you the driver from the chipset, the graphics driver, or both.

    Make sure that you have installed the Intel chipset installation and restart utility as well as the Intel HD graphics driver.

  • Satellite U920T - function keys does not work after update to Win 10

    Hello, good morning / evening...

    I use (U920T satellite) and recently updated my Windows 10 Tablet
    but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

    I tried to restore the system and update the driver software but nothing has worked...

    I use these keyboard shortcuts all the time and now it's really hard without them!

    What is the problem? What should I do?

    The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
    But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

    For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
    http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

    Maybe you can try the drivers released for other models of portable Win 10 supported...
    I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

  • Re: Satellite Pro U400 - 13G: software uninstalled - FN keys do not work

    The other day I uninstalled many programs standard of his Toshiba Satellite U400 - 13G, because it has been very slow in implementing.
    But now I realized that his FN hotskeys does not work.

    I tried to look in the support forum and the list of drivers, but I can't find the answer.

    So the question is what program/driver should I install to get the keyboard shortcuts to work again. It is running vista 32 bit.

    Best looks Anders vangsgaard

    Hello

    Well buddy. For the future I'll give you a tip ;)
    Never remove any parts/software if you n t know what they are for ;)

    The Satellite Pro U400 - 13G seems belongs to the PSU45E series.
    Choose this model number to download driver form Toshiba Europe.
    Then download the package of value added.

    To reinstall this PPV you will need to remove the preinstalled old VAP.
    Do it and after rebooting again to install the new downloaded package added value.

    In my view, that the FN buttons should then work.

  • Function key does not work on Satellite A50-109

    The Funtion Key (Fn) does not work on my computer
    And I don't know how to solve this problem

    It worked once (with all the F1, F2 etc.), but it does not work now

    PLS HELP ME!

    Thank you
    Bart

    Hello

    FN feature cannot stop working without any reason. Can you please what you did with your laptop last? The quickest option is to roll back OS to an earlier time using System Restore tool.

    Otherwise, you can try to install TOSHIBA common Modules again. To download check the Toshiba download page.

  • Satellite A200-1AX function key does not work do not

    Hey all

    I have installed XP a few weeks back and updated the bios to the xp version
    I didn't like it and I went back to vista but now my function does not work.

    I press and press the screen brightness but controls no longer appear and I have to use manually with my mouse or via the mobility Center
    is it because of the bios? I downloaded the new bios for vista and now it says that the rom space is full and closed unexpectedly

    What should I do? Help much appreciated

    Hello

    The problem is that you must update the BIOS to the XP version if you want to use all the features of the laptop on this laptop.
    After installing XP, you must update the BISO XP, and then you install all the drivers Toshiba XP available and public services.

    This should help.

  • Satellite Pro A120: my Ghost image created new does not work

    fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

    have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

    I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

    OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

    After each test, the machine master fine boots.
    have you tried the main hard drive in two new machines, its fine
    have reinstalled xp pro cd on two hard drives, it must be installed fine
    running spinrite all 3 disks that are very well
    Ghost does not all problems with the master drive
    have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

    This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

    answers please as soon as possible, thank you very much
    Andy

    Hello

    I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

    Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
    http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

    and

    Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
    http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

    Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

    It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

  • Laptop HP 15-R203tx: brightness (f2 and f3) function keys does NOT work

    Model - HP laptop laptop 15-R203tx

    OS - Windows 8.1 Pro 64-Bit

    Graphics - Intel HD 5500 integrated

    Dedicated NVIDIA GeForce 820 M

    I updated the drivers for my also well-integrated dedicated graphics card but still my function keys f2 and f3 for brightness control does not work although all other keys work.

    This PC comes with the BACK, but I started it with 8.1 Windows Pro 64-bit.

    Hello

    Well that does not explain why your f2/f3 keys do not work as you have only the Microsoft base driver installed - if the Intel driver has already been installed Ok, this may indicate a hardware problem.

    What happens if you try to install the Intel HD 5500 driver directly from Intel - it's the 2nd file in the list on the following link.

    https://Downloadcenter.Intel.com/search?keyword=Intel%C2%AE+HD+graphics+5500+for+5th+generation+Intel%C2%AE+core%E2%84%A2+processors

    If it installs Ok, reboot the laptop and let Windows fully load for a few minutes before checking it in.

    Kind regards

    DP - K

  • Function key does not work is not in Windows 8

    Original title: function (fn) button does not work to control brightness after upgrading to Win7 Ultimate for Windows 8 Pro?

    Before I was on Win7, the function key works to adjust the brightness after I upgraded to windows 8 the volume function keys still worked but the brightness is not.  Help, please.

    Finally, I fixed this problem! Thank you very much!

    I fixed it by downloading the update for Windows 7 here without quotes "http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3958411&prodNameId=4020966&swEnvOID=4055&swLang=13&mode=2&taskId=135&swItem=ob-84862-1"

    Then I ran it in compatibility mode with administrative privileges.

    Thank you!!

  • New T520 function key does not work do not

    Good forum,

    Just got my first ThinkPad, a T520 and after the UltraNav driver update it seems that some of my function keys no longer work. I've seen similar posts on this problem but all stem from different problems.

    My volume keys work, but there is no image on the screen on show mute/up/down. My microphone mute button doesn't seem to work at all, nor does the ThinkVantage button.

    According to the keys function F2, F3, F5, F6, F7, F8, all do nothing when used with the function button, however I can use F4 to sleep, F12 to Hibernate, the brightness and PgUp all light work.

    I tried the BIOS to see if I could affect something there, but I saw no way to do it.

    Any help in getting the function keys working properly again would be greatly appreciated!

    Thank you much in advance,

    ADK

    Hey again,

    Fixed the issue, incase someone else has this problem, it is called driver Hotkey for Windows integration.

  • t540p wireless function key does not work do not.

    I am a PC technician a Thinkpad T540p of construction for the end user. It is currently running Windows 7 Enterprise 64-bit. I installed all the drivers directly from the Lenovo support page. My problem is that the function key to enable the wireless Radio does not work. I checked the lock feature. The other function keys are marked as well function. I uninstalled and reinstalled the driver hotkey as well as the wireless driver and I still can't work.

    Hi DillardWF,

    Welcome to the Community Forums of Lenovo!

    According to the request, you have problem with Wifi function key for your ThinkPad T540p.

    Please check with BIOS update and then install the shortcut function keyboard with Lenovo power management driver.

    I hope this helps.

    Best regards

    Agnes Kumar

Maybe you are looking for

  • the app is only available in the app store from another country?

    Hello I am a Belgian citizen working and living in London (UK) and I used to make photos with a Belgian/Dutch company (HEMA) albums, they have now totally new software that must be downloaded through the app store, but it is not available in the app

  • Portege R500 - DVD player does not work

    HelloI love my laptop Portege I bought this month of September. The only thing is that the DVD player is not working for some time.-When I put a DVD or CD, I realize I can't freely turn the disc in the drive while it is still open. Strange, but I don

  • can not restore again peripheral iPhone, get the incorrect password

    I just upgraded the iPhone 5 s 6 s.  Run backup on my MacBook first.  every tie I try to restore it, I get an incorrect password error.

  • HP Laserjet 5if problem

    Howdy! I have a printer HP Laserjet 5if, I used it on my network for years. I added different machines and all woked fine. Today I turned it on and all computers show the printer as offline, as I restared the printer and the computer still no change.

  • "This copy of Windows is not genuine" after installing windows skin (transcript)

    So this weekend I spent a few hours to 'customize' my PC. I installed a skin (which I assume is the source of my problem), some tools to change the ORB start and a few other minor aesthetics, I also changed the sounds, but you can do this through the