Satellite Pro A - screen hinges compatible with M series?

Anyone know if the hinges of the screen for a series of Satellite would be compatible with M series?

See you soon

Hey Buddy

I think that no one here is able to answer your question because it s only a user to user forum and that you won't find here an authorized service provider or cell phone technician sorry!

But let me give you a little advice: contact the vendor of services authorized in your country. If you call them it only takes a few minutes and I think they can answer your question.

Good luck!

Tags: Toshiba

Similar Questions

  • The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

    Hello, need information about mainbord...
    Is the the same Satellite Pro 6000 and 6100 mainbord?

    Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

    The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

    The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

  • Satellite M40 screen is compatible with Satellite L30-101?

    Hello
    I have a Toshiba L30 101 and the screen is cracked.
    I have the opportunity to buy not working Toshiba M40 - 221, which has a display of work.

    The screen will work and work well.
    Both models are in the range of satellite and both use the screen 15.4 inches and made the same applay to the keypad/keyboard

    Thanks for your time

    Hello

    I can't say for sure, but if two laptop computers supports the same screen size then you have a good chance to get the screen M40 working with L30 Series notebook.
    But if you want to be 100% sure, then I'd take a screen which has been published for the L30 series.

  • Satellite Pro 6100 screen compatibility

    Hello!
    Is there a place I can check the compatibility of the screen for my Toshiba SP 6100?
    I have damaged a screen on one of my laptop and I would like to replace it.
    Thank you

    Hello

    The problem is that the Satellite Pro 6100 was delivered with four different views.
    14.1 ' (1024 x 768) color TFT display.
    15.1 ' (1024 x 768) color TFT display.
    15.1 ' (1400 x 1050) TFT color display.
    15.1 ' (1600 x 1200) TFT color display

    I found information that a P000334230 (LTN150X4-L01) screen is compatible with your device.
    http://www.getpartsonline.com/p000334230.html

    But I recommend to ask Toshiba service partner in your country for compatible screens.

  • Satellite Pro 6100: screen stays completely white or completely white

    I have a Toshiba Satellite pro 6100 running windows XP with SP2.

    For the last time, when you turn it on, sometimes the screen is totally blank and sometimes she is totally white.

    Must shut down the computer and try to reboot, sometimes several times until the computer starts correctly.

    Could you please tell what it is and how to fix it.

    Your answer will be highly appreciated.
    Thank you.

    Hi, Louis

    I think that we should first find out if the problem is related to the graphics card, for the internal display or on the part of the screen!
    In such cases, it s a good idea to connect the external monitor to the laptop.
    Check if the symptoms appear also on the external monitor.

    If the same thing will happen on the external screen so I guess that the computer laptop s video card is malfunctioning. But if the image appears correctly on the screen then the problem could be linked to the internal LCD display or the small part as FL inverter.

    Check it out

  • PRO ENGINEER Wildfire5 is compatible with Windows 8 with Toshiba laptop

    PRO ENGINEER Wildfire5 is compatible with Windows 8 with Toshiba laptop

    Their site is the place to check

  • What model of other screens are compatible with the Satellite C655D

    My Toshiba Satellite C655D screen is broken, ask some models of LCD cell phone compatible with it?

    I recommend buying a screen to authorized Toshiba dealer.
    You will be certain that such display 100% compatible.
    But the laptop does support a widescreen 15.6 "so, theoretically, most 15.6 screens should be compatible

  • Re: What screen is compatible with Satellite A200 PSAE3

    Hello

    I have a problem with my screen is damage.
    Now my question is what is compatible with my laptop so that I can find another that is compatible with my laptop.
    I didn't ask Toshiba how much it is for a new screen.

    PSAE3 A200
    Model number: PSAE3E

    So, I hope that someone can help me.

    Hello

    The laptop has been equipped with a 15.4 "widescreen XGA display. Is this good?
    In my opinion, you can use most 15.4 screens in this model of laptop A200.
    You can also order such screen partner of service authorized in your country.
    They should be able to provide all the compatible parts.

    But note; the internal screen for laptop is one of the most expensive parts of portable. This replacement can be really expensive.

  • Satellite Pro L20 - broken hinge baseplate - where to find the parts?

    Hello

    First post here, so please excuse the lack of local etiquette.

    My son has a Toshiba Satellite Pro L20 with a broken hinge base plate. I'm calling it a base plate that I can not find the name of the part anywhere on the web so far.

    Its obviously the metal plate on the basis that the hinge attaches to.
    You can see it if you remove the battery.

    Nobody knows what is this part and where I could possibly buy one?

    Kind regards

    Jimmy

    Hello

    I think that in this case the ASP from Toshiba (certified partner) might help you.

    You must enter in contact of this ASP in your country and the technician should be able to order a compatible part for laptop.

    You will find here all the FSA all over the world:
    http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

  • Satellite Pro M70 - screen is blank

    Hey guys,.

    Have had my Satellite Pro M70 for more than a year now and never gave me any problems before. On about 3 times now, the screen disappeared all of a sudden completely gray and white and stays that way, unless I restart and is so very well.

    Appears to be spontaneous, can't everyday and not even aware if his reason leaving for a long time.

    Ive noticed that more than half of the screen flashes from time to time but don't know if it's because it's on during a long period or heat related but only started to do this recently.

    It just seems to be a problem with the monitor, like running programs under were unaffected (IE if I was running MSN messenger and the screen went gray, I could still type messages, etc just not see them!).

    Have the latest graphics driver for my Intel knowledge: 6.14.10.4363, don't know if it could be a problem with the card? Hepatitis a lot of free hard disk space, seeking to increase the ram (currently 512) suggestions?

    Hello

    I am very happy that I don't have these problems on my Satellite M70. I recommend you test your laptop connected to an external display to see if the symptoms are the same. If so, I fear that there is a problem with the graphics card.

    On the RAM, can I just say that your laptop can handle with max 2 GB RAM and compatible RAM modules are:
    512 MB (PA3412U - 1 M 51)
    1 GB (PA3411U-1M1G)

    Good bye

  • Satellite Pro A60: Screen does not

    I used my Satellite Pro A60 yesterday and everything was fine, I tried to use it today and the screen lights it is just white... Please can someone help I am lost without her, the blue light comes on, but nothing on the screen please help.

    [Edited by: admin on 3 July 05 13:22]

    Hello

    you see the Toshiba logo red when it starts or a screen empty?
    Toshiba logo: so you have a software failure, and you should backup your data and do a restore
    White screen: while there must be a problem with your hardware! Contact a Service partner and he will repair under warranty!

    Good bye

  • Satellite Pro M40: screen remains dark until Windows has fully loaded

    Hello to all here.
    I have a problem with my laptop. My laptop is a Satellite Pro M40.

    When I turn on my laptop, I found the backlight won't come... the screen will stay dark until it has fully loaded into Windows. I've checked all my food, and there all fine options. Even if I can get the Bios screen its impossible to read the txt because without backlight. I tried to hold the Fn & F7... joy of Noy.

    Someone at - it ideas?

    Richard

    Hello Richard

    I didn't see anything like that before and I'm a bit confused why you can't see the BIOS settings, but running the OS. Use of the FN + F7 key combination won't help because this option only works on Windows and not on the level of the BACK.

    If possible try to plug the external monitor and test again. In any case I put t think you can fix it yourself. Try please contact Toshiba authorized partner in your country. Explain the situation and see what they say.

    If you discover that something please let us know. It will be really interesting to know why this happen.

  • Touchpad on Satellite Pro P300 does not work with Windows 7

    Hello

    Recently, I load Windows 7 (64-bit) on my Satellite Pro P300. I downloaded all the drivers for W7 64 bit and installed everything, fortunately, most of the time.

    The touchpad, however, is not completely functional. The upgrade page says to use the Vista drivers and did not provide any drivers for win7. Installing the Vista drivers didn't really go so well.

    In any case, the essential element of the missing features is this thing where you drag your finger up and down the right edge of the touchpad, and it scrolls for you. I can click and double click and move the slider. But I can't scroll. And it's such a pain with move the slider above the scroll bar of the application, with a big screen.

    Any help would be appreciated.

    See you soon
    '

    If I understand you right you are missing these additional mouse settings. Am I right about that?
    Which driver you have installed?
    Perhaps Synaptics driver?

  • 2 yellow lines on Satellite Pro L10 screen

    Hello

    I was wondering if anyone can help me, I got my Satellite Pro L10 for about a year now with no problems, recently however when I turned it on, it started but then a blue screen came with the computer on it jargon and then the closed system, when I went so it back I ended up with two yellow lines down on the left hand side everything works fine, but the two lines remain on the screen.

    I am somewhat a novice when it comes to computers, so if anyone has any ideas as to what I can do to get rid of them I'd appreciate it.

    See you soon,.
    Biff

    Hello

    It is important to sort out if these lines are there because of the defective LCD display or may be caused by the graphics card. You can test it with an external display. If it is possible to connect an external monitor to your laptop and check if these lines are displayed on the external monitor.

    If there is not problem with LCD screen. I recommend you to check if the warranty is still valid and contact service in your country. By faulty hardware will be replaced free of charge.

  • Satellite Pro 480CDT does not start with mounted HARD disk?

    Hello
    I have tried several disks in my Satellite Pro 480CDT, but none of them starts. The screen stays black and the power led blinks orange (long, short, short, short, short, long, short, short). If I drive the machine past the on-screen "In Touch With tomorrow, TOSHIBA. He sees Windows CD-ROM or a floppy disk. I tried with 6 hard drives all below to 6 GB and AFAIK the work. I tried with another 480CDT a 220CS and a 2140CDS. Surely all hard drives and computers laptops have the same flaw? What I need to update BIOS or something as none of the drives are original for the machines.
    Help, please!
    Thank you

    John.

    Hi John

    I'm afraid of nothing that you can do everything alone. When the electronic power supply detects a power problem, it sends the hex code. In this case you should contact the technicians. They can read this code and will know what the problem is here.

    Just FYI: I discovered this disc HARD original for this unit has the P000244000 part number. Maybe it will help you get another HARD drive for testing.

    Sorry I can't tell you more info on this good old classic.

Maybe you are looking for

  • How to remove or clean the server taken out of service/absence list

    In the "Server" application, whenever it is launched, it displays a list of servers that have either been downgraded or does not exist (eg..) (local). Is there a way to clean this list?

  • Portege Z830 - 8 GB RAM upgrade possible?

    Hello I bought a z830-10f (i5) What people tried to install a dimm so-on 8 gig you Z830? Some people have tried successfully. I tried with a 8gig-dimm corsair, system to detect it, but the next time, it was not detected. With the original samsung 2 g

  • Satellite Pro L10 - how to use product recovery?

    I've had this laptop for a while, it was done incrementally over the years and now seems to have abandoned completely. I can barely open anything without being invited to what program I want to open it with, and web browsing becomes almost impossible

  • Build the application error

    Hello When running an application in visual C stored under "C:\Program NIUninstaller Instruments\NI-DAQ\Examples\VisualC\Ai", I get a runtime error stating that "the application could not initialize properly (0xc0150002). Click OK to close the applic

  • Problems connecting to wireless printer

    I have a HP photosmart D110 printer. Most of the time, it has been great so far, but sometimes it disconnect and won't let me print. Now, he says that it is offline and no matter what I have changed nothing. I used the HP print and scan doctor but it