Satellite Pro A10 CD Burning: after having burned the CD is empty

Similar Questions

• Satellite Pro A10: No sound after upgrade to Windows XP Home SP2

  Hello

  Just use the recovery disks on my Satellite Pro A10, no problem with the sound, and then upgraded to XP Home with SP2, no noise.

  What I've read elsewhere, this is a problem and there seems to be an answer. I spent hours looking for drivers updated without success.

  I have also contacted Toshiba support, after blow and blow that they reported the following driver, 5.12.01.3542, which is the same one that I have already installed and does not work.

  Certainly there must be something out there that works.

  Ant.

  Install the driver of his most recent available FRO this sound chip and perform all the Windows updates available on the Microsoft page!

  Update just the BONES together!
  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Notes; You may have to restart the laptop and need to connect to this site several times to get all available patches.

• Re: Satellite Pro 6000 hesitating behavior after having worked for a while

  My SP6000 10 years old running Windows 98 starts and works fine, but very often after 10 minutes (more or less), it will start to answer 'hesitating', which is as well the mouse and the keyboard may take several seconds to answer each click or movement.
  The machine do not crushed, and the fan continues to pass in and out. More generally, a normal behavior is restored after a restart, or sometimes it will return its own if left alone. The problem seems also worse if you have several windows open at the same time.

  I am inclined to think that it may be related to overheating, with the central unit to stop a few seconds at a time, and then meet again for a second or two.

  Unfortunately, I do not know if the problem has a story that I acquired antiques only recently.

  Thanks for any ideas?

  I put t know how long do you use Windows preinstalled, but I think that your laptop needs to be cleaned and you must install OS to have own stuff pre-installed.

  Have you can be upgraded to RAM at maximum value? This isn't a bad idea. For this old laptop RAM modules are not expensive and more.

  With a few words: I think your laptop needs overhaul.
  What do you think?

• Satellite L775 - 18Q - nothing works after having used the mode of intel

  Hi all

  I own a Satellite L770/L775 18 Q.

  Problem is that the screen remains black, no HD playback, nothing happens
  It all started with when I installed the program intel turbo boost should not do I guess.

  Looks like that the bios is corrupted or some thing, I don't quite know because nothing works, not with either F2.
  I know that my laptop is still under warranty, but perhaps it can be fixed somehow.

  Please, I beg you.

  Greetings
  Fred

  I doubt that an installation of an application, the driver or the software would result in such issue eventually it s simply a bad luck that happened after the Intel Turbo boos installation

  So I recommend workaround short but if this fails, don t lose any time and get in touch with the Toshiba ASP in your country for this problem under warranty conditions.

  + Workaround: +.
  Remove the battery and AC adapter
  Wait a few minutes (30 min)
  Then press the power button / stop along 30 sec
  Now connect the battery and the AC adapter and press the power button to turn on the unit.

• Satellite A100: Cannot install recovery after having deleted the Ubuntu partition

  Hello friends,

  I have the Satellite A 100. I was using dual OS - windows vista home edition and Ubuntu. Now I wanted to remove Ubuntu and so I did the stupidest thing - directly delete the partition with Ubuntu which had the GRUB files. Then to the laptop computer restart of course the Grub bootloader wasn't there and if the computer is not started or load any OS. Then I thought that I will reinstall Vista with product recovery CD but the progress reached at 2% and then I keep getting error 1117 a failure to read. I tried so many times without success. I even tried to install XP, but it says Intel boot agent cannot make connection. And it also fails.

  Please help to reinstall Vista or XP. I'm really stuck and I learned a lesson not to tinker in mobile when it isn't those of Cup of tea!
  Any help is greatly appreciated.
  Thank you!

  Perkins

  > Now if I download EasyBCD how would I be able to run it or how should I use it?
  You will not be able to run EasyBCD because you are not able to boot Vista.
  EasyBCD can be installed only in Vista and will allow you to change the Vista Boot Manager.

  I think you need to format the entire disk HARD again should erase all partitions and must attempt to reinstall Vista.

  I recommend using a free tool called GParted LiveCD. Google for what it helps format the HARD drive!

• Activation of the LAN after reinstalling Windows - Satellite Pro A10

  I gave my laptop Toshiba Satellite Pro A10 an a copy of Windows XP Pro format. In general, I use a PCMCIA Wireless Internet card, but I don't want to connect to my laptop via a physical Ethernet cable. Unfortunately I can not understand how to turn the local network on my PC (I.E. It is even not in Device Manager). Does anyone know how to do this? (IE. What Toshiba utility, I need to do this etc.)

  Hello

  It's very strange. Please visit the Toshiba download page and install Toshiba FAST ether LAN V. 6.4.14 drivers satellite A10. It should work. If the device is enabled in the Device Manager it must work when you connect the LAN cable.

• Satellite Pro A10 PSA15E: NO sound after installing Win XP

  Hello world

  I had to reinstall Win XP Home - which went well, however - now there is no sound and it says no audio device is installed. I tried to install the audio drivers on the Toshiba CD but they go as far as unpacking but then say "not installed" and Setup stops.

  I went to www. support. Toshiba.com and follow the menu to identify which drivers to download? but there are several possibilities for the
  Model A - 10 and I am not sure I have listed below models have.
  A10-S100, A10-S1001, A10-S127, A10-S128, A10-S129, A10-S1291, A10-S167, A10-S169, A10-S1691, A10 S177, A10-S178.

  I would be grateful for your advice.

  Thank you

  Andrew

  @mrafowler

  > I went to www. support. Toshiba.com and followed the menu in order to identify which drivers to download, but there are several possibilities for model A-10

  What you mean? On the European driver Toshiba page, you will find only one series Satellite Pro A10.
  Once again; Do you have a computer or a Sat Pro A10 laptop satellite A10?

  There is a driver of sound for a portable Pro A10. This is a version of audio driver Analog Devices 5.12.01.3542.
  If you are using XP SP2 please check the information provided on the page of the driver Tosh

• SD-C2612 IDE #1 error after wrong firmware update - Satellite Pro A10

  Hello
  I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  I tried flashing with the right firmware (1315) but get the message to the Primary Master and Slave as "Not ATAPI Device" and "drive not connected".

  NB: at the start, even with the deleted DVD ROM, I always get the #1 error IDE.

  Update the bios to the latest version would help or is there all the options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?

  Thanks in advance for any advice you can give.

  Best regards
  Angus

  > I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  Lol :D I have don t wonder you get the IDE #1 error message.
  As you say yourself, you have flashed the drive with the wrong firmware. This has damaged the master/slave/c-salt settings of readers and so the BIOS doesn't recognize the CD/DVD drive. But I wonder why someone flashing the drive with a bad firmware?  :| We still know that a wrong firmware can damage the CD/DVD drive... and above all it is not necessary to update the firmware.

  > Update the bios to the latest version would help
  The BISO update will not help you because you have already good BIOS and it s NOT a problem of BIOS, but the evil and not compatible firmware is stored.

  > or are there options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?
  I'm don't know if this helps, but I know that it is not desirable because it may damage the material of CD/DVD players

  I recommend you contact the ASP in your country guys might revive the CD/DVD drive. Let's hope

• Satellite Pro A10 does not pass the Windows page after removing SP2

  Hello

  I have a toshiba laptop Satellite Pro A10.
  I installed windows service pack 2 week last to try to get one of these dongles TNT to work, he never so I uninstalled service pack 2 I was going to try and reinstall it to see if it would work.

  Now, my problem is that the laptop will not go at all, it gets to the windows XP page and then everything stops, someone could help me I don't know what to do!

  Thank you
  Sharon

  Hi Sharon

  Seems that the system files are corrupted on the HARD drive.
  All of the installation and the removal of the service pack has damaged some files or registry entries.

  I don t think you will be able to resolve this situation without reinstalling the OS.
  In my opinion, it's a better way to get rid of this problem.

  Take the Toshiba Recovery CD and reinstall everything.
  If you want to back up your data, I recommend to connect the internal HARD drive to another computer via the external USB HDD controller.

  Good luck

• Can I install a DVD - RW on my Satellite Pro A10 drive?

  I want to upgrade the drive of DVD ROM/CD-RW (SD-R2412) on my Satellite Pro A10 on a DVD - RW drive, so I can burn DVDs. I bought a Toshiba (TS-L632) DVDRW drive, because it's exactly the same size and shape, such as the existing DVD ROM drive, the same voltage (5v) and the same connector.

  However, after installation and setting on the laptop, it is not recognized as being installed that is to say, there is no sign of it at all on the computer. Is it because the laptop is completely unable to support a DVD - RW disc, or have I bought an incompatible device? If so, is there a compatible DVDRW drive?

  Thanks in advance,
  Fred.

  PS the exact model of the Satellite Pro is PSA15E - 0115Q - EN

  Hello

  All the sides are unusable on each laptop model. It depends on the assignment of pins. Toshiba offers a list of all compatible readers in paper manuals s user.
  I ve checked s manual for your model of laptop, and here you can find a list of all compatible optical disk drives, you can use with your model of laptop. See pages 4-8.

  Choose the one that suits.
  If you do not visit the Toshiba download page. Here you can find.

• Question about BIOS for Satellite Pro A10 files

  Hello

  I have Toshiba Satellite Pro A10 and later yesterday, he won't, he past the TOSHIBA start screen and then black with a flashing cursor, it didn't leave me in advanced settings or the settings of the BIOS, a friend told me I need to Flash BIOS, I came across the site and found only a BIOS update and management told me to use the floppy drive , he said when I unzip the file I get an .exe file which I opened and it will give me three files, one for the CD ROM, one for the floppy drive and the third I don't remember, but it didn't happen, when I unzipped the files in a temporary folder, but I never had the files.

  I think I had to have it on my own laptop, and then it would be extracted properly, because my laptop does not work I can't do and even if I put the files on a disk, they are too big.

  Then...

  Where can I get the files from the BIOS that I can put on a floppy disk and then I can boot from that disk and it will fix the BIOS?

  Thank you

  Hello

  OK, follow these steps:

  Burn the file bios to CD on a CD, boot from it and update your bios. It's a simple and easy way. I Don t understand why it shouldn´t work, given that I ve updated my bios in the same way. I burned the image to CD and booted from this CD.

  Please answer perhaps you just made a mistake when you think to (I sometimes do too much, not often, but it happens..)  :)

  Welcome them

• Satellite Pro A10 - need information about upgrading RAM

  Dear members of Ant
  Regarding the above machine: Please can someone advise:-how many slots memory has.
  I think it's two but do not know.
  Also size maximum memory can this module we have in this laptop please.
  If it's 2 @ 1 GB per module, then we would have a total of 2 GB.

  Is the standard hard drive on this computer, a hard drive of the laptop. Can I get out the small 20 GB one and replace it with a larger. for example 120 GB etc.

  Thank you very much for your help.
  Ian

  Satellite Pro A10 two memory locations are available. Laptop computer can manage with 1 GB of RAM and you can use two compatible PC2100 512 MB (PA3164U - 1 M 51) modules.

  This old machine uses 2.5 HDD with old IDE connector. I found some info that it has been bundled with 20GB, 30GB and 40GB HDD. I think you can improve it with up to 100 GB HARD drive but just to be sure he has the same connector on the HARD drive.

  If you have any other questions you are welcome.
  For more information after the exact model number please.

• How to recalibrate battery on Satellite Pro A10?

  The battery that came with my laptop has begun behaving oddly a couple of months (it's almost two years, Satellite Pro A10). She arrive at about 50% and then immediately fall to about 2 percent. After setting up with this for a few months, I finally bit the bullet and bought a new battery (charge not trivial, I might add). The new battery behaves exactly the same way. Someone has any advice on how to recalibrate battery PC Toshiba laptop, or verify that the problem is with the system and not the battery itself?

  Hi Richard,

  Check in options power management Toshiba you have the right setting for your type of battery. In my opinion, there are different settings for long battery duration, high power batteries, etc..

  If the problem persists, then I recommend re-installing the power management utility to make sure that it is not at fault, and if the problem persists, then there may be a problem with the power system of your laptop, in which case you will need to return to an authorized Service Agent Toshiba.

  Good luck

• Toshiba Satellite Pro A10, Windows XP Service Pack 2

  Hello world
  "I have a ' Toshiba Satellite Pro A10: P4 - M 2.2 GHz/XP Pro/15" TFT/40 GB / 768 MB.
  I have installed Windows XP Service pack 2 in my book.
  After the update to Windows XP SP2, the only way to start my computer after putting in "sleep mode" or "hibernation mode" is witch power off and then start up.
  I reinstalled "Toshiba Power Saver", but nothing came of it.

  What can I do about it?

  Kind regards
  Krasteff

  Obviously the Service Pack 2 does not match current preinstalled saver.

  First installation, you have is to wait for an updated version of Toshiba Power Saver, which is XP Service Pack 2 tested. But so far, you have no "Standby" or "hibernate".

  Installation of the second. If you need to "Standby" or "Hibernate" feature, uninstall Service Pack 2 and wait until there is a solution to the problem of energy saving.

  The two sounds is not perfect, but I think the second installation is the best way. Toshiba will surely bring a new Service Pack 2 tested Power Saver version.

  Good bye

• Satellite Pro A10 won't boot up - where to get the disks

  I have a Satellite Pro A10 that currently does not start up Windows (XP) as it says

  The following file is corrupted or damaged:
  C:\windows\system32\config\system

  Tools & Utilities CD that came with my laptop has unfortunately been scratched and will not start.
  I have two system recovery disks, which are very good.

  My questions:

  1. is it possible to buy a replacement Tools & Utilities CD-Rom?
  2. If Yes, where to go?
  3. is there a way to restore my laptop without having to reinstall everything completely and lose all my files?

  Thank you

  Post edited by: Stuart_2007

  With regard to the point;

  (a) generally, it should be possible to order the CD of tools & utilities but I ask why?
  (b) you can buy the CD of the ASP in your country
  (c) the older recovery CD is supported by an expert mode. You can use this mode to choose the partition where the OS is to be installed. In this case only, this partition will be formatted.

  But look, man. You do not need to order the CD tools & utilities because on this CD, you will only find the Toshiba drivers can be downloaded from the Toshiba page too.