Satellite Pro A10 does not start

Hello

My laptop died this morning. When I press the POWER ON button, the power light is on, but nothing else happens. The screen is dark and I can't hear the fan running.

Please can someone help?

Hello

The first step that I can recommend is to remove the battery for a short period and try to restart the device. It will be interesting to know if there is a possibility to enter the BIOS settings (use the ESC key at startup).

Tags: Toshiba

Similar Questions

  • Satellite Pro A10 does not start - no hard drive

    MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
    WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
    CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
    DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

    Hello

    HARD drive is visible in the BIOS?
    If this isn't the case, then this means that the HARD drive is faulty.
    Try to replace the HDD with a compatible and try again.

    Good luck

  • Satellite Pro A10 does not start (HARD drive seems to be missing)

    Hello, I hope someone can give me some advice on this problem: I have a 2 years Satellite Pro A10. Recently, it starts not at all and I noticed that if I look at directories on the C: drive using the command prompt, it said "file not found". Cannot start Windows at all, not even in Safe Mode.
    Using the recovery disks is I help spread messages as no such fixed disc and 'Extraction impossible '.
    is - that say I have:
    1 a hard drive damaged
    2. defective connections on the HARD drive? -If Yes, how I fix that?

    the system didn't crash before it happened, she doesn't have to load up when I started it.
    Would appreciate any help.

    Thank you
    SCL

    Hello

    Well, it could be a hardware malfunction of HARD drive. Yes, it is possible. But I don t think that there is a bad connection. You used this HARD over the last two years and you n t change the settings of connections on this HARD drive. Is this good?
    If it possible s so I suggest you of to completely format the HARD drive.
    Then try to start the recovery procedure.

    However if the HARD drive has a functioning default (ie. crushing of the head), so the only way is to replace this device.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite Pro L300 - does not start form DVD

    Problem: my Satellite Pro L300 will not start no optical drive (DVD)

    Leisure problem scenario:

    Insert the DVD Toshiba recovery in optical disc drive,
    Restart and during the boot prompt, press F12 and select the optical drive.
    Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

    Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

    Model No.: PSLB1E-02200GG3
    Serial 78685377Q

    I'm doing this because I want to change the OS from Vista to XP.

    Hello

    Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

    Have you tested with any other CD bootable (Linux)?

  • Satellite Pro A120 - does not start with 4 GB of memory

    Hi all

    I'm new here so please be gentle!

    I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

    Where I'm going wrong? This model will not take 2 GB memory modules?

    Any advice will be appreciated.

    Best regards

    Dr. Feelgood

    Hello

    Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

    Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

    So please bring back the memory modules and buy 2x1GB. It will work.

  • Satellite Pro L50 does not start with 8 GB

    I have a brand new L50 Pro of Satellite (PSKK3A-001001)

    Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
    I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
    The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
    He also said DDRL, which I assume is the correct type.

    The 4 GB mark was Hynix and the 8 GB is Apacer.
    Anyone have a resolution on this or know what the problem is?

    On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

    According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
    Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

  • Satellite Pro L20 does not start

    I have a new satellite pro L20 M750
    does not start
    the thing is since the first time I tried to start it it would not start.
    I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.

    Thanks in advance

    Hello

    Did you check if the AC adapter is working properly?
    Initially, the battery is not charged. You must connect the power adapter to recharge the battery.

  • Satellite Pro 460 does not start with the new drive in

    I recently received a Satellite Pro 460, but he had no hard drive.
    It starts great without a disc in but as soon as I put a new hard drive in it does not start.

    I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

    Someone has any ideas why this is and what I can do about it

    I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

    What HARD drive you are trying to use on this good old classic?

  • Satellite Pro C650 - does not start

    Hey all,.

    My Satellite Pro C650 boot not beyond a certain point. I tried to start in all modes different for example safe mode, mode of networking,

    However this proved unsuccessful, the laptop freezes and I meet a constant and regular beep at the same point every time that I try to start. I even tried to start Linux 12.04 USB to see if it's hardware or software, unfortunately is the same, which means hardware failure.

    The problem is that I don't know the bios beep codes and I can't understand what needs fixing.
    I was hoping you could help me!

    Thanks :)

    I think you need professional help with this problem. I don't know if your laptop is always guaranteed to be valid, but in my opinion, you should contact the nearest Toshiba authorized service provider and ask for help. They have special diagnostic tools and hardware malfunction can be detected and repaired.

    For the addresses and phone numbers, visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • Satellite Pro M10 does not start

    My M10 Pro Sat will not start.
    Power cable shows a green light and a light orange constant and nothing else, but does nothing when the network is not pluged.

    Any suggestions? With our thanks.

    I put t know if this will help you, but what you could do is the following:
    -Unplug the power adapter, remove the battery and wait about 30 min
    -then reconnect the two parts and check to see if you can power the laptop

    It helped me in the past and maybe it will help you too.
    Otherwise:(bien, puis vous devrez contacter le technicien de l'ASP pour la vérification de l'ordinateur portable)

    Welcome and good luck

  • Satellite Pro A10 does not pass the Windows page after removing SP2

    Hello

    I have a toshiba laptop Satellite Pro A10.
    I installed windows service pack 2 week last to try to get one of these dongles TNT to work, he never so I uninstalled service pack 2 I was going to try and reinstall it to see if it would work.

    Now, my problem is that the laptop will not go at all, it gets to the windows XP page and then everything stops, someone could help me I don't know what to do!

    Thank you
    Sharon

    Hi Sharon

    Seems that the system files are corrupted on the HARD drive.
    All of the installation and the removal of the service pack has damaged some files or registry entries.

    I don t think you will be able to resolve this situation without reinstalling the OS.
    In my opinion, it's a better way to get rid of this problem.

    Take the Toshiba Recovery CD and reinstall everything.
    If you want to back up your data, I recommend to connect the internal HARD drive to another computer via the external USB HDD controller.

    Good luck

  • Satellite Pro L40 does not start

    When I turn on my Satellite Pro L40 it shows me a screen asking me to start to repair windows or start windows normally.
    When you choose the option it brings me to the same screen.

    Does anyone have any ideas?

    Thank you very much

    Salvation will be

    For me, it looks like the OS installed was confused for no apparent reason
    If you are not able to boot into the Windows XP operating system and if the repair option doesn t helps to start in safe mode I n t see any other possibility as to boot from the Toshiba restore CD and reinstall the OS again!

    But note; boot from the restore CD will format the whole HARD drive and you will lose all files stored on the HARD drive. ?

    It is a drastic procedure but in my eyes he's the only one who could allows to solve this problem.

    Welcome them

  • Satellite Pro 480CDT does not start (even in BIOS)

    Hi all

    I just hand on a Toshiba Satellite Pro 480CDT

    I had to work with the original power supply (on an inverter plugged into my 12v cars I wasn't close to 240 v power outlet)

    It worked very well, it boots into Windows 98 and I played with a few programs (Media Player and defragmentation)

    I got it defragment for about 5 minutes, while charging via the car converter, however it froze and I had to hold the power button to restart.

    When I tried to next turn on the screen remains empty, the hard drive is not turn and there is only the power LED and battery LED that lights up.

    He let me press the function key that lights up the fn LED on top of the keyboard, but then after a few presses of lighting stops.

    I opened the case and concluded that there are two batteries of the bios, the look at where they are plugged into the main Board, there is green type of corosion on the pins, I removed the plugs (who might add when it is very difficult to remove because of the coros), I cleaned the plugs (male & female) with a pen of WD40 and plugged in I got a voltmeter on them and they demonstrate tension and also show higher voltage when the power supply for laptop is connected, then it means they are load or at least tension.

    After doing this I go up the laptop, but it still suffers from the same problem?

    Please what could someone help or give me a little advice? My next event is the power supply Board but wanted to get some ideals before hand.

    Thanks in advance.

    Pete

    > after doing this I go up the laptop, but it suffers still from the same problem?

    His pity to hear that your baby dead :(
    But if we move to a diagnosis of material, I doubt someone here might be able to point in the right direction if his motherboard problem, it would be really difficult to solve this problem without using special tools, circuit diagram of motherboard and of course experience

    I think you should check the modules memory vivid faulty ram could affect the laptop everything is just speculation

  • Satellite Pro 6100 does not start - power light flashes

    Hello

    I have a Satellite Pro 6100 when I press the power button and HDD lights up briefly then powerlight blinks.
    It seems to Flash a pattern: on (2 sec) flashes (2 seconds) then off (about 8 times)

    What he told me? No fan, no display no hardrive is active.
    Food is ok because it load battery.
    I bought it as it would be something easy to fix ideas?

    Hello

    It sounds bad
    Generally, the power led will blink due to a malfunction of the equipment.
    The LED provides a microcode and only the technician can read this code.
    A common user is not able to read.

    Maybe you'll be able to read this code, but you won't find any description about the meaning of the code.
    I recommend you contact the technician in your country

    But try this:
    Remove the battery and unplug the AC adapter.
    Wait severla times and then plug in the battery and plug in the AC adapter.
    If this does not help, you have aks, a complementary technician...

Maybe you are looking for

  • How can I PREVENT Time Machine back on the wake from sleep?

    I leave my machine on the work week and when I finished the night, I SLEEP there. In the morning, he has no need to backup first thing. But Time Machine insists on execution from the moment I have a mouse and he wakes up from his sleep. It was fine w

  • Tecra A4 won't start on DVD or network to allow the factory restore

    I have a Toshiba Tecra A4, I insert the recovery CD and try to boot it on the CD player and the computer simply ignores the CD player. I change the bios so it should start on the last drive, but she always starts here everything first. If I remove th

  • CHKDSK error after replacing screen

    Hi all I have an old T60, I am preparing to give to my mother. To get this loan, I have replaced the screen SXGA + dead with a XGA almost nine. Everything went well, the new screen is beautiful and probably better for my mother, since there res more

  • photos went to the Gallery of photos, but not in the folder of photos, why?

    When I downloaded my photos from my camera SD card in my computer photos went just to the photo gallery, not to the folder of photos.  This is why when I try to send pictures via my gmail account I gives me only the choice of the photos in the pictur

  • Get a touchscreen application to work with Trackball

    I had someone with more knowledge design me an application with buttons customized to work with the Blackberry Storm.  The program works perfectly for this model, but I want you hover over this code for applications of trackball, using JDE 4.5.  Shou