Satellite Pro A10 hangs during the installation of Win XP

Similar Questions

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite L355D-S7825 - hangs during the installation of recovery

  My laptop girls. She asked me to restore the computer to factory settings. It is running Vista Home Premium 32 bit. I tried the restore disks 4 times now to pretty much the same results. It will get all the way to the "application final Configuration where it installs the user manual and the office links and then it's there. After reading several posts here with the same problem, I decided to let it sit all night. This morning it had expired. I clicked on the button of the mouse to wake him up. It passes to the logon screen. It shows login Admin and says that the account has been locked, please contact your system administrator. How can this be? It won't let me! My only choice is to restart the system. After the reboot, it displays the screen of the AFC and reinstalls the two same files manual user and links and then it's there.

  I can minimize the screen of the AFC I did and then I changed the power settings to never expire. I have the WiFi off button as requested by AFC screen, as it will not be installed file links with WiFi turned on and the user manual. I don't know what else to do.

  Anyone has any ideas on this? What would you say if I was totally format the HD and then try to restore? Any help would be appreciated.

  Hi Poppi,

  What you mean with screen AFC?

  Well, if recovery installation doesn't work properly, it s hardware malfunction or the disk recovery...

  You can install Windows from a normal Microsoft drive correctly?

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• Satellite Pro A10 PSA15E: NO sound after installing Win XP

  Hello world

  I had to reinstall Win XP Home - which went well, however - now there is no sound and it says no audio device is installed. I tried to install the audio drivers on the Toshiba CD but they go as far as unpacking but then say "not installed" and Setup stops.

  I went to www. support. Toshiba.com and follow the menu to identify which drivers to download? but there are several possibilities for the
  Model A - 10 and I am not sure I have listed below models have.
  A10-S100, A10-S1001, A10-S127, A10-S128, A10-S129, A10-S1291, A10-S167, A10-S169, A10-S1691, A10 S177, A10-S178.

  I would be grateful for your advice.

  Thank you

  Andrew

  @mrafowler

  > I went to www. support. Toshiba.com and followed the menu in order to identify which drivers to download, but there are several possibilities for model A-10

  What you mean? On the European driver Toshiba page, you will find only one series Satellite Pro A10.
  Once again; Do you have a computer or a Sat Pro A10 laptop satellite A10?

  There is a driver of sound for a portable Pro A10. This is a version of audio driver Analog Devices 5.12.01.3542.
  If you are using XP SP2 please check the information provided on the page of the driver Tosh

• Satellite M645-S4055: Disconnections during the installation of Windows XP

  Hello everyone

  I want to install Windows XP Professional on my laptop Satellite M645 S4055 but fail to do so. During the initial installation, it gives blue screen.

  Currently, Windows 7 Professional installed.

  I've upgraded BIOS 1.90 version also available on the toshiba Web site.

  Please give me a solution.

  Hello

  I imagine that you didn t include the driver to CD Win XP SATA.
  The point is that Win XP needs an extra SATA driver in order to be able to recognize the HARD drive that is connected to the SATA controller.

  Here's a nice Support Toshiba Europe basic knowledge FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  You should check your chipset and download the Intel Storage Manager driver on Intel page that would support your chipset.

• Satellite Pro L100 - Crash during the update of the Bios

  Hello

  I am the owner of a Satellite Pro L100 (PSLA4E)

  On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

  When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
  Is there a way to solve this?

  Thank you very much
  Rich

  Hi Richard

  Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

  Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

  Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

  Good luck and have a nice day

• Satellite Pro A60 crashed during the update of the BIOS

  Updating to BIOS ver 1.70 to 1.90 (from Windows XP) my Satellite Pro A60 off without any warnings. After about 5 minutes of waiting I went it. And... computer just several beeps and stops again.
  Anyone has idea what it means? Is it possible to turn it on again?

  Hi Vladimir,.

  I suspect that your BIOS is damaged when your A60 turns off. Unfortunately, this means you A60 are a failure now his POSITION leading to generate failure codes series.

  As Felix said codes tells the Toshiba Service Agent exactly what the problem is so you will need to contact them for assistance.

  HTH

• Satellite L450D - 11G - hangs after the installation of recovery

  The recovery disc provided does not work. After you install all the files, it goes into a boot loop with "installing Windows for the first time, through 'Please wait', for flashing to the top of the home screen and then stop and restart.

  Is there any solution for this?

  Hey Buddy,

  You must wait a few minutes. On my laptop Satellite and Windows 7, I had the same problem. Windows will be reinstalled several times until the installation is complete and you will always see the same screen.

  Don t so worry about this. Everything is ok with your laptop! :)

• Installation hangs during the installation of Adobe Pdf Reader, MS Doc Viewer free of charge and same VS2010 c# Express

  For the last two months that I had trouble setting things in general, for example MS doc viewer for free and VS2010 c# Express.

  Yesterday, I tried to install the new version of Adobe Pdf Reader and had exactly the same problem again. I double-click on the executable installer, that it goes right up to 100% on the preparation and when it gets to the point when it should start the installation itself that the computer just hangs and installation does not.

  I'm almost certain that this is not a virus I have an up-to-date antivirus and run a scan complete of all the two days. He has never had any problems there.

  Anyone know what goes wrong? How do I put right?

  Help, please.

  Here's how to solve problems with Windows Installer: http://www.ehow.com/how_4813669_fix-vista-problems-windows-installer.html.

  If this does not work, try the Windows Installer Cleanup utility: http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.html and see if that helps.

  Try to reinstall Windows Installer: http://www.microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en.

  I hope this helps.  If this is not the case, the issue may not be with the installer, but another problem, and we need to solve problems to try to find the problem.  Post back if this does not work and we will try other options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer hangs during the installation of updates (I have to install 64)

  What should I do when I cannot yet download or update anything without my computer freeze or lock up on me.

  Hi floridahmbdy,

  Check if an error message or error code listed in the event viewer, you can check the link below:http://windows.microsoft.com/en-us/windows7/What-information-appears-in-event-logs-Event-Viewer

  Try the methods below:

  1. start the computer to boot and check if you are able to install the update to Windows. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  Make sure that you reset the computer in normal mode in step 7.

  2. you can also try the steps from the link below: the problems with the installation of the updates:http://windows.microsoft.com/en-us/windows7/Troubleshoot-problems-with-installing-updates

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "D" created automatically during the installation of Win 7?

  Hello

  My wife has a Toshiba laptop, bought refurbished, with Win 7 Home Premium installed.

  Windows Explorer shows 2 partitions on the hard drive, "WINDOWS(C:))." "has the OS installed on it and"Data (D :) '. "has the necessary information, when used in conjunction with the recovery CD for system recovery.

  My question is:-the 'D:' partition created automatically when installed Win 7 on a blank disk, formatted, hard or when you perform a "clean" installation to upgrade XP. The high '\HDDRecovery Data (d :))' folder on the partition "Data (D :)". ', (can't get 'D:' through Explorer properties) on the laptop my wife watch as being slightly more than 6.5 GB.

  If this partition is not created automatically that I can programmatically create it before the installation owner, but if I do, what size does?
  If it's better that Win 7 'sees' a single partition, I can easily do that.

  This situation "C:", "D:" suits me very well because I currently just on my XP Pro x 64 system drive. A historic agreement dating from when I used a dual-boot put in place. When I spread the secondary boot option I put in place a small drive "D:" so that my 'work' partition, first on my second hard disk (3) has been kept as "E:", several shortcuts pointing to the location. I didn't want to trawl through the system to change things to E: to something else. Guess I'm just a bit lazy!

  So, in short, "D:", create or not create?

  Thanks in advance for your help.

  Tony Norton

  D: is normally assigned automatically to your recovery drive or optical drive. The size of the recovery partition is normally determined by the manufacturer of the computer, and it can be based on a number of factors such as the WIM image to reinstall Windows 7 in addition to packaged applications, drivers, and utilities. Sizes may vary from 10 to 20 GB. Some may if distributed on several partitions recovery.

• computer froze during the installation of win 7

  I installed windows 7 on my computer, it got a ways in the installation but then frozen, I rebooted the computer, but now, the only options it gives me is to restore the computer, or tried to fix the computer, ive tried both, but its hours for some reason any and then says it was unsuccessful and restarts

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/