Satellite Pro A10 just turned off with warning message

Similar Questions

• My Satellite Pro M70 itself turns off in the middle of the secuence of startup

  My Satellite Pro M70 itself turns off in the middle of the secuence of startup

  After turning on if it passes the test post and enters the menu grub (Linux + Windows) or BIOS
  without problems, but most of the time after the start of the BONE found in the start - up, suddenly it powers off the power.

  The problem becomes bigger and bigger as punishment I can boot any operating system

  As seen on messages more soon as I cleaned the vents of CPU with a spray suddenly sure I wasn't a problem of overheatting.

  Someone has an idea of what can happen?

  Thank you

  Hmm, the laptop passes the MESSAGE correctly and it stops during the initialization of the operating system. Is this good?

  Well, in this case I would exclude the RAM to malfunction.

  I put t also think that it's an overheating problem because the laptop should work a little longer until it would be closed due to high temperature.

  What about the HARD drive malfunction? Are you sure that the HARD drive is ok?

  In my opinion, you should check the HDD and maybe try another.

  Welcome them

• Satellite A75-5211 just turns off

  Hi, I had this problem in the past once and he's back now. My computer is a Satellite A75-5211. When I play any game on it (like MVP Baseball 2005), at some point the computer just turns off without any warning. It's as if all the power is just part of him! I can start again, and then everything is normal.

  In the past, the problem disappeared for a few months, but it happens regularly now. If anyone can help me, I would appreciate it. Also, I use the program hardware sensors monitor 4.2 and it tells me that my CPU1 temperature is 60.0 ° c, while the temperature of the HARD drive is 37.0

  If this problem cannot be solved by a technician in person, where is the nearest place that I can go? I live in Canterbury, UK.
  Thank you
  Sebastian

  To me, this looks also because of overheating.
  This probably occurs because the game is a heavy application that requires complete laptop. In this case the CPU and graphics card produce a lot of heat, and therefore the temperature rises to a higher level.
  Then the operating system shut down the laptop to prevent damage.

  As mentioned you should check the fans and cooling modules and possibly try to clean with the vacuum cleaner. In addition, there should be enough free space around the laptop to the circulation air properly.

• HP Pavilion dv6 problem. Computer off with warning message. Help, please.

  My HP Pavilion dv6 notebook PC is a little over a year old and has this problem: when I unplug the charger, the computer dies at random. It turns off without warning and won't turn on until I put the charger in.
  
  The battery can last 20 to 80%... or it's what he sees when it restarts.
  
  Where is the problem? battery or hard drive?
  
  Help me / give me advice in any way you can please!

  Thank you!

  Thanks for the follow up, if I feel sorry for the results you had. Visit this link for information on buying a spare battery.
  
  Please let me know if I can be to continue his service.

• Satellite Pro 6100 himself turn off

  Hello

  I'm from the Italy. It is 3 days that my Satellite Pro 6100 after some time (it can be 30 minutes or 3 hours) close itself.
  I tried to update bios version 1.70 to 1.90 without any result. I tested my HARD drive and it works fine. I formatted and reinstalled Windows XP Home SP2 Pro edition but the problem that it is still there.
  When it crash, reboot, it seems 'BAD RTC BATTERY' and "BAD CMOS", I have to press F1, then I exit without changing anything.

  I saw that 3 weeks ago appears at the beginning of this message: "PXE - E61 MEDIA TEST FAILURE CHECK CABLE"and"PXE - MOF OUTGOING INTEL PXE ROM" but works laptop well until 2 days ago.

  I don't know why, but every time I restart now stop when WINDOWS XP is on the window (not the first logo on page WXP black) cyan, but the second on the window cyan; can do work that I have to press CTRL + ALT + CANCELLED and it go to the desktop.

  I don't know what to do? Center of Toshiba, it is far from my town, if you can help me will be appreciated.

  Sorry for my English, I read a few post but exactly with my problems, there is no job.
  Thanks in advance, it's a great laptop I jump to save it.

  p.s. There is no dust on it, I tried to lift the keyboard to clean, but it was already clean, even behind the fan.

  Hello supertraz,

  On 6100 laptop there is a soft spot between the control panel and from the motherboard, causing this malfunction. You will not be able to solve this problem simply raise your keyboard and blowing air into your laptop.

  A good description on this problem (I had, too) can be found on this forum posted by user seintaxx here:
  http://www.eXpansys.com/ft.aspx?i=104221&thread=7

  A photo of the defaulting party is here:
  http://img204.imageshack.us/img204/3/sp6100fixby1.jpg

  Good luck with it.

  Kind regards
  chain

• Satellite Pro 6000 display turns off sometimes

  Hello

  I hope someone can shed some light on a problem with a laptop Toshiba Satellite Pro 6000 that I can't seem to get to the bottom.

  The laptop has Windows XP Professional installed and works fine, except for the fact that intermittently (could be 5 minutes, maybe 90 minutes) the display screen is what I can only describe as 'blocks '.

  The o/s plant (I ran BACK and Tests of diagnosis when the problem occurred) I would say movement of waves of mouse to the screen and activity HARD drive software continues running, except the screen is unreadable with blocks of color scheme.

  Any ideas or suggestions as to what this could be, and how I could go about repairing it?

  Hello

  It's very strange question.
  Have you tried to update the graphics driver? If not then please select this option.

  Besides if the update doesn't fix this eventually it there something wrong with the hardware. In this case, it is not easy to say what could be wrong.
  In your case, I recommend you connect the external monitor if the problem occurs.
  If the color blocks will also appear on the external monitor so eventually the graphics card or motherboard is corrupt.

  But, if the problem occurs only on the internal laptop display, so I would say that there is something wrong with the display or the FL-inverter.
  In this case, you should contact the technicians to solve this problem, because guys have more experience than each common user like me and you.

  Good luck

• Satellite Pro 4600 PS460E turns off in 3-4 minutes after the connection

  My Toshiba laptop is having problem that it turned off after 3-4 minutes of connection.

  He doesn't get turned off when we run it in safe mode.
  Pls let me know how to troubleshooting this problem.

  Hello

  Can you please tell us which model of laptop you have exactly? This laptop model older or newer?

• Satellite PRO A10 new HDD partition with 80 GB HARD drive

  I've recently updated the original 30 GB HARD drive for a 80 GB HARD drive. I used the recovery CD and all is well.

  The old laptop is now as good as new again.

  I notice that rather than having a c: drive of 80 GB, recovery utility has given me 3 partitions in about 25 GB each (c: d:, and e :).) They were originally FAT32 although I changed it to NTFS.

  My question is can I remove e: and d: partitions and then increase the size of the c: up to the maximum size possible (approx. 75 GB)? I know that windows xp can handle, but I don't know if the BIOS can or even why 3 partitions have been created in the first place.

  Post edited by: dim33

  To be honest I m really surprised that there are 3 partitions after the recovery procedure. I got many old books as your A10 and newer seen this.
  In any case go to disk management and try to create partitions on the way you want it to be.

  In my opinion you should have the C partition with 25 or 30 GB and the second 50 GB partition for the data record. Don t use a partition only. If something does not go the whole partition must be deleted and you will lose all of your stored data. It is always better to have the second partition for data backup.

  In the worst case (you cannot start OS), you can install Windows XP Home edition on the first partition, boot OS and have full access to all stored data.

• Satellite Pro M30: automatically turn off touchpad when I plug a mouse

  Hello

  Is it possible to configure the M30, so that it automatically shuts the touchpad when I plug in a usb mouse?

  Thank you

  Hello

  Sorry, but this option is not for me. It can be disabled manually by using the FN + F9 key combination.

  Good bye

• Satellite Pro A60 has just turned off and won't come back

  My Satellite A60 laptop just turned off and will not go there is nothing no sound no lights nothing.it ran on sector when it happened.

  any help apreciated

  Hello, Heidi

  Remove the battery, connect your laptop adapter only and try starting your laptop running. When the laptop boot and OS is fully loaded, wait a few minutes and reinsert the battery.

  If everything is OK look carefully if the battery will be charged correctly and when battery LED is green (fully charged battery) try to turn off your laptop as usual. Turn it back on and carefully monitor what is happening exactly.

• SD-C2612 IDE #1 error after wrong firmware update - Satellite Pro A10

  Hello
  I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  I tried flashing with the right firmware (1315) but get the message to the Primary Master and Slave as "Not ATAPI Device" and "drive not connected".

  NB: at the start, even with the deleted DVD ROM, I always get the #1 error IDE.

  Update the bios to the latest version would help or is there all the options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?

  Thanks in advance for any advice you can give.

  Best regards
  Angus

  > I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  Lol :D I have don t wonder you get the IDE #1 error message.
  As you say yourself, you have flashed the drive with the wrong firmware. This has damaged the master/slave/c-salt settings of readers and so the BIOS doesn't recognize the CD/DVD drive. But I wonder why someone flashing the drive with a bad firmware?  :| We still know that a wrong firmware can damage the CD/DVD drive... and above all it is not necessary to update the firmware.

  > Update the bios to the latest version would help
  The BISO update will not help you because you have already good BIOS and it s NOT a problem of BIOS, but the evil and not compatible firmware is stored.

  > or are there options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?
  I'm don't know if this helps, but I know that it is not desirable because it may damage the material of CD/DVD players

  I recommend you contact the ASP in your country guys might revive the CD/DVD drive. Let's hope

• Satellite A200 just turns off

  I have a satellite A200 that keeps turning off...

  first of all, it wouldn't start up, so removed the battery and plugged directly to AC and then it started again.

  Now, he just stops... It seems to be not too hot...

  What are the problems and solutions...

  Computer is 19 months old and it's very frustrating...

  Hello

  In most cases, the blocked cooling modules are the reason for the higher temperature and why the laptop turns off automatically.
  You could clean the vents and cooling fans with a jet of compressed air.
  This would remove the dust inside the laptop.

  Welcome them

• Satellite Pro A10 - Win 7 with WLan PA3171U-1MPC

  Hello

  I have a Satellite Pro A10 with a PA3171U-1MPC Wireless LAN Mini PCI Card, 160 GB HARD drive and 1 GB of RAM, I want to upgrade to Windows 7 for my son.

  He worked in XP before.
  States of Windows 7 Upgrade Advisor:
  "Before installing Windows 7, go to the device manufacturer's Web site to download the latest driver for this device.
  After I installed Windows 7, install the sound driver. »

  Does anyone know if there is a driver (Windows 7) or a WinXP driver will do the job?
  If Yes, where can I download a (my XP image has been corrupted, I'll do a new installation).

  Thank you very much
  Steve

  Hello

  Firstly by Satellite Pro A10 is not Win 7 supported and therefore, you will find not all Toshiba drivers for this model of laptop. The unit is just too old.

  I put t know if Win XP WLan driver compatible with Win 7. I think that it s is not compatible. Driver Vista may be compatible with Win 7, but not Win XP driver.

  In the worst case, you will need to use an external USB WLan dongle to get wifi on this laptop.

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• Help wireless with a necessary Satellite Pro A10

  Hello I just bought a Toshiba Satellite pro A10 psa15e-03u82-en of second hand and I'm having trouble with the wireless option. This computer is equipped with a built-in wireless card?
  The light on the switch doesn't switch on when on is selected and there is no wireless option in Device Manager.
  But if you go to the support page for driver download at the web site of Toshiba drivers for wireless utilities!
  Is the map or can it be mounted under a removable hatch on the base of the laptop?
  Any help will be greatly appreciated a lot

  Hello

  the problem is that wireless is delivered optionally with this machine. This means that the machine does MUST NOT have wireless but can be equipped or bought with the wireless option added.

  You can only do the following: you can get a mini-pci wireless card (I suggest atheros, gently work cards in almost all machines) or you take the PCMCIA wireless card, so Don t you have nothing to install ON your machine.

  In the case of a mini-pci card, you can improve your machine by removing a cover on the bottom (should be more on the front of the machine) and then put the card carefully into the slot. And CAREFULLY stick antenna that plugs into the connectors on the Board. They cable cannot be repaired if you damage one of them.

  It would be better to look for a technician and allow it to install the card. I think it should be much safer. ;)

  Welcome them