Satellite Pro A10 - Modem does not

Similar Questions

• Satellite Pro 6100 Modem does not - No Dial Tone

  Hello

  I'm in terrible trouble. I have a big meeting Friday and discovered that the internal modem on my Satellite Pro 6100 does not work. I downloaded the drivers of software Modem since the support site, and the installation seemed to go OK. There are no conflicts listed in the Device Manager, and when I query the modem to in the properties of the modem (from the control panel), it seems question OK too, but...

  HE DIDN'T THERE WAS NO DIAL TONE!

  I don't know that it is connected to my phone OK. Instead of a tone, I hear a loud hum, with a series of clicks. I can't hear being composed either DTMF tones, even when I disable "wait for dial tone. This behavior is the same if the modem is connected to the phone line.

  I have a big rally Friday and will need this modem to work... any help would be much appreciated...

  Thank you

  Matt.

  Hello
  that doesn't sound so good!

  The measure where I read that your ad you´ve checked your system almost all.

  Right on the thing, have you installed a firewall or other programs to check system that denied access to the modem?

  It is also ok, you should let check your laptop on a faulty Modem.

  Good bye

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite Pro A10 - some keys not working only not with the new keyboard

  Hi all

  I hope some1 can help with this

  I have a Satellite Pro A10. The prob I have is a.b.n.and enter keys do not work and this is a new keyboard
  I hooked my other A10 and all keys work so the keyboard is fine.

  Everything works fine with the usb keyboard. Mother board everything seems ok.
  Any help please

  Chris...

  Post edited by: widgy

  Hello

  Why do you think the motherboard is ok?
  Maybe it s a controller keyboard problem
  Did you check if the cable is correctly connected?

  In my opinion if you are sure that the keyboard is ok 100% the problem to be attached to the motherboard because there is no other party that is placed between the keyboard and the mobo.

  Good bye

• Satellite Pro A10 - modem dissappeared

  I suddenly lost my A10 (software Toshiba AMR modem) modem. The received message is "deleted modem" or "modem not present." I tried recovery: the modem appeared again for awhile, but disappear once I installed SP2 again. Now, in the information system I can see that the modem appears in COM3, but I have not all the COM ports that appear in Device Manager. My internet connection displays the message "modem does not exist. I try ping and I have the answer. Recovery discs are original. Reinstall the modem driver does not help.
  Any advice or help? I would really appreciate it.
  GK

  Hello

  If the modem is not displayed in Device Manager after the recovery procedure that there must be a hardware problem. The COM3 port is a virtual port and it is not listed in Device Manager.

• Satellite A30-504 modem does not

  Hi all

  Old old old Satellite A30 504 my father had problems of modem for quite awhile. Here are the symptoms exposed:

  Modem is recognized as "TOSHIBA Software Modem AMR" and classified works correctly. However, when you query the modem, I get the following message:

  + The port that the modem is attached could not be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional. +

  Settings of resources:
  Range of e/s-2400-24FF
  E/s series 2000-207F
  IRQ 7
  (I can't change any of these settings)

  Needless to say that the modem does not work.

  Has anyone ever met such a problem before? Does anyone know of a way to fix this? I really don't want to get a PCMCIA modem for this laptop, so any help would be greatly appreciated.

  Thank you in advance!

  Dan

  > I have reinstalled Windows XP twice
  How? Do you use the restore disc Toshiba for the installation of Windows XP Home edition?

• Satellite Pro L50 - A does not illuminate

  Hello

  I took a few steps on this forum but no luck so far...

  My L50 - A Satellite Pro was working fine up until yesterday, but today, only it just won't turn on. A small orange led light appears when I connect to the power cable...

  That's what I've done so far-

  1 power cable removed
  2. using a needle, pressed force shutdown (stop) at the bottom for 10-12 seconds
  3. then I pressed the start/power button on the front for 60 to 70 seconds
  4. I have connected the feeder and then to new press button start / stop at the front for 60 to 70 seconds

  Yet the laptop does not start!

  any suggestions?

  Thank you

  Hmmmmmm... It is not easy to say what the problem is here.
  Have you used your computer laptop usual ot, you might update something?
  In general, there are steps that you did which could be responsible for your problem?

• Satellite Pro M10 PS630E does not start after upgrading CPU

  I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
  He initially has a 1500, I tried to put a 1766.

  I follow the maintenance manual, later the computer change is not star upward.
  When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

  My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
  Is it possible to get it working again.

  Hello

  The flashing light means that it has detected a hardware problem on the motherboard!
  Perhaps you have used a wrong CPU and is not compatible.

  Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

  What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
  Secondly the update of the BIOS won't help you with this problem!

  You must use a CPU that is fully compatible!

  Welcome them

• Satellite Pro U300 OS does not recognize PS/2 Port TouchPad

  I have a similar problem.

  My system doesn't recognize that the PS/2 Port TouchPad exists on my Satellite Pro U300. He acknowledges that it no longer works but when I go to Control Panel then mouse it does not appear in the list of devices.

  Help!

  Hello

  I m do not know what problem describe you exactly.
  Do you mean that your notebook computer touchpad no longer works, or did you mean the USB mouse?

  If you mean touchpad, so you should try to reinstall the driver for the touchpad.
  The European driver Toshiba page provides Synaptics touchpad drivers series Pro U300 for Win XP and Vista.
  But generally the operating system should automatically recognize the touchpad and touchpad should work even using the common internal Windows driver.

• Satellite Pro C660D - screen does not turn

  I just got my Satellite Pro C660D back from repair (for a faulty fan), but the screen does not light when I start the laptop.

  She lights up on the front (and I can rotate the block number power sp that the keyboard works).
  Any ideas?

  I agree, I mean the laptop should work just fine after it has been fixed by ASP so I think that something was not right here and the technician must check this!

• Satellite Pro A100-080 does not start - stays dark after 3 beeps

  Hello
  After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
  When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
  No other useful help, as the screen remains dark.

  We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
  a defect of memory.

  I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
  Does anyone have an idea what could be the problem?

  Thx for a short help.

  Hello

  Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

  On the Toshiba site, you will find a list of aspic:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite Pro L300 - touchpad does not work

  Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

  http://www.ISD.Toshiba.com.au

  and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

  I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

  Hello

  > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
  I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
  I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

  In your case, I recommend this controlled again.

  By the way; My touchpad is always disabled so that en external mouse is connected.
  It is parameters that control it. Please check in your touchpad properties too!

• Satellite Pro M70-113 does not start up - it hangs at the logo screen

  Hello

  I have a toshiba satellite pro m70-113.

  Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
  But when I restart it works well, that is to say, it starts very well.

  But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

  After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
  And I found that the text will not go forward after having reached:
  Find disk 0:
  Maybe default feel HDD initialization...
  The captured image is here:
  http://img144.imageshack.us/img144/9986/image007sp2.jpg

  Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

  So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

  And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

  So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

  And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

  Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
  i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

  So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

  Please answer.

  Hi Ashish,

  The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

  I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

  Kind regards

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.