Satellite Pro A10: No sound after upgrade to Windows XP Home SP2

Similar Questions

• I have no sound after upgrading to Windows 7. I have a Dell Inspiron 1420

  So I sound after upgrading to Windows 7. At one point, I get sound in my headphones. Now I have nothing. I have a Dell Inspiron 1420.

  [Moved from comments]

  Go to the website of Dell, put in your service tag, and download the driver for your audio.

  Good luck.

• Satellite Pro A10 - no sound?

  Hello
  I have a Satellite Pro A10. For some reason, the computer plays no sound whatsoever. This includes CDs, DVDs, windows startup intro, no sounds of online video.
  Ideas for basic checks for me please?
  Big thank you.

  Hi, I have the same problem myself! I tried everything but nothing helps, some bitten computer tell me it's a chip that has blown on the main map, I thought it would be cheaper to buy a new laptop than to get it fixed!

  a mine for less than a year - the power supply died after a few months - the mouse pad has been temperamental for a few months and now this! good luck with it, if you hear of any cheap magicians who can fix it then let me know!

• Satellite Pro A10 - need information about upgrading RAM

  Dear members of Ant
  Regarding the above machine: Please can someone advise:-how many slots memory has.
  I think it's two but do not know.
  Also size maximum memory can this module we have in this laptop please.
  If it's 2 @ 1 GB per module, then we would have a total of 2 GB.

  Is the standard hard drive on this computer, a hard drive of the laptop. Can I get out the small 20 GB one and replace it with a larger. for example 120 GB etc.

  Thank you very much for your help.
  Ian

  Satellite Pro A10 two memory locations are available. Laptop computer can manage with 1 GB of RAM and you can use two compatible PC2100 512 MB (PA3164U - 1 M 51) modules.

  This old machine uses 2.5 HDD with old IDE connector. I found some info that it has been bundled with 20GB, 30GB and 40GB HDD. I think you can improve it with up to 100 GB HARD drive but just to be sure he has the same connector on the HARD drive.

  If you have any other questions you are welcome.
  For more information after the exact model number please.

• Satellite Pro A10 CD Burning: after having burned the CD is empty

  Hello

  I have a Satellite Pro A10 and my CD burner stopped burning. Someone at - it? I also had a problem earlier where he would burn only 1 disc immediately after startup. It says it burns and goes through all the motions, but in the end the drive has nothing about it. I use Maxell discs and have had no problem before using these. If the CD burner is broken it is possible to get a replacement and they are also easy to assemble.

  Thank you

  Hello

  It is really possible that the drive is defective. Before Exchange you it the only thing, you can try is to check if there is some success if you use different empty media (producers) and burn it using a few different burning applications. I recommend you to use NERO software of engraving.

  Also be sure that the engraving option is enabled and not only option called simulation.

  Replacement should not be problematic. If I remember correctly from the drive is fixed with a screw and you can find it in the bottom corner near the drive itself.

• Satellite Pro A10 - no sound and the volume is enough

  Hello

  Recently, the sound quality of my satellite Pro A10 began to get grainy and this which resembled your comments, but the volume was not high and not so long ago
  order completaly.

  Ive reinstalled the sound drivers and it worked
  perfect for about half a day and was silent again.
  I tried to use headphones and still no sound.

  help would be very nice.

  PS. Please excuse the wrong spelling: P

  Hey Buddy,

  Following suggestions:

  1. recovery of your machine COMPLETELY and check if it work s
  2. in the case of no success, try a BIOS update and check again
  3. If the previous steps didn t have worked, visit the following site and contact a service partner authorized in your country for material balance / repair:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• Satellite Pro L100 - no sound after reinstalling XP

  Hello

  I have a Satellite Pro L100 and I recently had to format the drive and install Windows XP.

  I don't have the CD to restart that came with the computer.

  I downloaded the drivers and utility on the toshiba site and checked that all were current and up to date.

  After extracting the audio driver, run setup.exe the device driver installation wizard appears and tells me to some equipment for the driver to install for.
  The problem is that there are absolutely no camera there.

  I checked and the sound card is in there, then it should be there in this list.

  Anyone have any ideas?

  Hello

  The downloaded audio driver package contains a fix of Microsoft KB888111XPSP.exe
  You must install everything first before starting with the installation of the audio driver.

  This is why I recommend to check device manager and remove the sound card and peripheral devices high definition audio.
  Then restart the laptop, install the MS hotfix, restart the computer once more and then install the audio driver.

  Good bye

• Satellite L40t-b917 - sleep problem after upgrade to Windows 10

  Name: satellite product L40t-b917

  Operating system: Windows 10 (64-bit)

  Hello

  If I have problems with the mode 'sleep' after that I upgraded to Windows 10. When I try to resume my laptop from sleep mode, Toshiba screen seems then the unit turns off.

  After 2 hours of searching on the internet I found that a solution said that my drivers are too old. So I tried to download but my drivers resembles not yet supported.

  Any solution to this problem?

  Where can I download updates for my device?

  Thank you.

  Hello

  Go to control panel and uninstall the Touchpad, display, wireless and sound drivers/utilities.

  Restart, and then run Windows Update to install the updated Windows 10 compatible drivers.

  Make sure that the BIOS is also the latest version.

• Satellite Pro A300 1NT - Possible to upgrade to Windows 7?

  Hello.

  I intend to buy the Satellite Pro A300 1NT, but want to make sure that I can not upgrade to Windows 7 and more specifically the characteristics of touch screen.

  Thank you for taking the time to consider my question.

  Hello!

  I think that no one can say whether the Satellite A300 compatible with Windows 7.
  Windows 7 is not on the market yet, and I think it will take a few times to release.

  And Satellite A300 doesn't have a touch screen, so I think that you cannot use these features on this laptop.

  Good bye

• bad sound after upgrading to windows 7

  I just finished upgrading my e 9520f pc to windows 7 (premium). The upgrade going without any problems until I jumped into a blu - ray disc. Let me tell you how I have my sound and video hanging. I have video (hdmi) running on tv (no problem) I have audio my receiver (coax) running, I hear speakers when playing music or youtube (same test ToneWorks) but get a hissing sound during playback of blu - ray discs.

  I have installed all updates for windows and hp media smart software after the upgrade (there were several besides). I went around a couple of times audio realtek. I get sound when I went from realtek to run audio through the hdmi cable. This looks like a cyberlink media or hp smart problem for me.

  any help or suggestions would be helpful

  Thanks in advance

  I would like to inform you about my sound problem. I fixed my problem with my sound of bd. When I first upgraded to windows 7, I didn't have the option to roll back the realtek driver but since then updates in case of application and tonight I had the opportunity to roll back the driver, so he did. To my surprise this corrected the problem I had with reatek'a including dts and dolby digital digital output on the receiver.

• Yoga 2 Pro - sleep setting missing after upgrade to Windows 10 RTM

  Here's another interesting event. I use sleep mode all the time, that's what happens "when I close the lid. After upgrade Windows 8.1 for Windows 10 RTM, "standby mode" is not found. "when I close the lid" and related parameters in power management have an empty selection, sleep does not appear in the drop-down list of choices. It seems revenue to "Put to sleep" by default. By reading the other Windows 10 forums I know sleep is supported in Windows 10, how can I get that back? I tried to download and install the latest driver for power management (as dated 17/07/2015, I think) but I get the message that "you already have a newer version of the driver installed", I cancelled out of the facility. Are there newer drivers planned for soon? I can shoot with Microsoft Basic Display Driver (3200 x 1800 only, see my other ad in the forum), although I used a different resolution in Windows 8.1 and hibernate instead of mode 'sleep', but I hope that these features will work soon. Thank you, Bob

  * Sleep is back * after having solved my problem of graphics driver. Fixed. See the thread «driver Intel HD graphics on Yoga 2 Pro fail after...» "for more details. Cheers, Bob

• No sound after upgrading to Windows 7

  No sound in Windows 7

  Yesterday, I upgraded from XP to Windows 7. Once completed, I tried to listen to music. Sound indication bar was moving, but I couldn't hear anything. I checked the speaker connections and even tried the plug to headphones, but still no sound. The Device Manager shows all the problems and I do not receive the error messages. The ONLY change I made was... before upgrade, sound; After that, no noise.

  Hello Jgh54,

  Thank you for your message.  Let us make sure that your playback devices are enabled.
  Right click on the speaker on your taskbar icon > select "playback devices".
  In the empty space, right-click and select both "Show disconnected/Disabled Devices.
  You can see icons for your speakers and headphones now?  You may need to activate these two.
  You can also try the troubleshooter to find connection issues that may exist, the instructions are below:

  Click 'Start' > select 'control panel '.

  Type of troubleshooting in the top-right search field > select "troubleshooting."

  Click "Hardware and sound" > select "play Audio".

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• No sound after upgrade to Windows 7

  Hello

  My HP laptop now has no sound after window update.  Try to use troubleshooting, update driver sound, but still not work. Help, please!

  Laptop model

  HP Pavilion dv7-6178us notebook PC

  Window7 Home Premium 64-bit Service Pack 1 operating system

  Hi Nick,

  You are more than welcome

  All the best,

  DP - K