Satellite Pro A100-622: disk space HARD lower since I use regitry cleaning tool

I have a Satellite Pro A100-622 with 80 GB hard drive.

About a week ago, I used a program I downloaded on internet to clearn registry and improve "performance.
Since my HDD has been gnawed.

I deleted programs as much as I could, but even before the cleaning, I never used 30 GB max.
Have done everthing, disk cleanup, and no sooner got a few MBs, they disappear.

Don't know what to do now.
Even tried to reformat the drive using the recovery of products of Toshiba, nothing helps.

Any ideas?

Hello

You mean that 30 GB on the HARD disk are available?

Check the status of the disk in disk management.
You can see the entire HARD drive and all the available partitions
Perhaps a partition has been created and the other part of the HARD drive is unallocated space

But he s strange this recovery disk didn't solve this usually recovery disk format the whole HARD drive and redefines the laptop to factory settings

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

    I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

    In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

    The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

    Any ideas?

    Hello

    You can download the drivers (and especially in your case for the sd-card-reader) here:

    http://PC-support.Toshiba-Europe.com/Vista/

    and here

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

    If you have any other questions, just ask. ;)

    Good bye

  • Satellite Pro A100-622 - Realtek driver compatible to Windows 7?

    I have a Satellite Pro A100-622
    Part number: PSAAPE-00F005EN
    Current OS: Vista Home Basic (OEM)

    I would like to upgrade to Windows 7 Professional (less than £50 for the educational license). I run Windows 7 Upgrade Advisor and this indicates that all devices are compatible except for: Realtek High Definition Audio (with SRS). The adviser said "we have not the compatibility information about this device.

    Someone at - it went down that road and found a driver windows 7 for the PA system or alternatively found the vista driver works OK?

    My current version of the driver is realtek 6.0.1.5326.

    See you soon

    Hey Buddy,

    In my opinion that s is not a problem to get a newer driver. Most Vista drivers are normally also works on Windows 7 and if not, since the Realtek page you can download a newer version, the Windows 7 compatible driver too:
    http://www.Realtek.com/

    Check this box!

  • Satellite Pro A100-622 lcd screen switch

    Hello

    can anyone tell me where the switch that turns off the display when you close the lid, or sensor or anything that turns the unit off.

    my screen stays on when closed after that I adapted a new Panel lcd, inverter and cable.

    Thank you.

    First of all, check that Windows is configured to do something when the lid is closed. Perhaps, it is set to "do nothing".

    I think it has a magnet near the LCD that triggers a sensor in the base (and possibly the motherboard).

  • Satellite Pro A100-622: Impossible to activate the card PCI-E BT

    Hello

    so, I have this laptop and it doesn't have the internal Bluetooth module or no connections to install one.
    So I bought a combo wifi/Bluetooth Broadcom pci-e card and WiFi part works fine but the Bluetooth part is not recognized,

    When you install the Bluetooth driver that I get "turn on Bluetooth", the fn + f8 does nothing so I was wondering if the pci-e connector is limited in the connections of the pins or there may be another question.

    Is there any software for Toshiba to throw the switch on the pci-e card?

    What is the exact brand and model of your handset device name?

    I guess the part Bluetooth is also a USB device as any device Bluetooth standard of our days.
    Nevertheless, the ID of the material seems to be unknown to the Bluetooth stack.
    So you could check the VID/PID string in your Bluetooth device device manager and
    Add it to the file 'tosrfusb.inf '. This file is used by Toshiba Bluetooth stack to identify the
    Bluetooth hardware. Maybe a new hardware detection will work now.

  • Satellite Pro A100 - HARD drive upgrade

    Hi, I have a Satellite Pro A100 with a FUJITSU MHV206OBH HD, he has been faithful and worked for at least three consecutive years, now my HD is filled with data from software etc. etc. I just changed the memory and upgraded to 2 Gygs and really the A100 is now as fast as my Dell XPS. I love my Satellite and want to install a new larger drive,
    Has anyone in the forum upgraded to a larger HD, advice, any recommendation of HD, where can I find the service manual for this.

    Best regards

    Thor Hedderich

    Hello

    In General, all satellites/Satellite Pro should have SATA hard drives and upgrade is not problematic. You can do this alone.
    If your laptop's 60 GB HARD drive only you can improve even with 120 GB or 160 GB.
    These hard drives are so cheap.

    Is that enough for you?
    Replacement is easy to do and you don't need manuals.

    The low side is set with a cover of HARD drive screw. On the disc lid HARD is placed also for computer laptop (one of the 4).
    -Remove the HARD drive cover
    -Remove the HARD drive pack by pulling on the cushion of the battery, following the direction of the arrows
    -Place the pack HARD drive on a flat surface (such as a desk) and remove the two cushions

    I guess you know now how to put a new.

  • Satellite Pro A100-830 - HDD upgrade questions

    I'm a complete noob so please forgive my silly question!

    I would like to replace my laptop HARD drive, is there any combatibilty issues I should be aware of, or is it just a case of getting a HARD drive 2.5 "?

    Is it easy to buy an external and use the internal drive inside the case?

    This seems to be the best way to the value of doing. Specific recommendations?
    Thank you!

    Hi magicmat,

    Generally upgrade the HARD drive is not complicated, and that's why you only have to remove the cover of the HARD drive on the lower side of your laptop to replace the HARD drive.

    Satellite Pro A100 already use hard disks with SATA interface so you have such a HARD drive. In addition, I would recommend a 5400 RPM model because it s quite fast and doesn t a lot of power.

    So that s what you need to know about upgrading. Theoretically, you can use the old or an external HDD with an external HARD drive enclosure. Also no problem. :)

  • Norton Ghost crushes on Satellite Pro A100

    Good afternoon everyone,

    I'm having a problem with a few laptops I have here. I just got a few Satellite Pro A100 but I have problems with making an image of the HARD disk. I tried Norton Ghost and a few other programs that can back up a disk to an image, but none of them worked. For some reason, they all crash when they are tryig to get started.

    I tried it on 3 different PC laptops and failed each time, exactly at the same place. I guess it has something to do with how these programs manage the memory.

    If someone has had this problem before and have you found a solution for this?

    Hello

    I doubt that the problem is something serious. But I can say that your best bet is to bring to an authorized service provider. The hard drive under sometimes is used to disconnect after a bit of work. But this isn't anything you can do to fix it. You must take it to a repair shop and ask them to look at. The reason that Norton blocked is because it cannot read the disk hard because she is not completely connected. I would like to know how this happens. And one last thing, if you want to turn the laptop and to take cover in the lower right and see if the hard drive is seated properly and firmly. Then try to use the ghost.

  • Satellite Pro A100-81: memory Pro Duo card is stuck in the card reader

    I am the proud owner of a Satellite Pro A100-81. I inserted a Duo Pro Memstick into the slot of the card reader...

    The card slipped too deeply into the slot so that I unfortunately can't remove the card more.
    Any ideas how to remove the card?

    Hi Gary

    Are you sure that the laptop computer s card reader supports memory stick Pro Duo?
    It s unusual who supported cards will slip to deep into the slot, something as may occur if the card is not taken in charge and is not compatible with the slot

    However, you shouldn't t do anything hard disk average if you n t know how remove it ask someone to help him with more experience for laptop

  • Boot from USB on Satellite Pro A100

    Hi, I own a satellite pro A100 computer laptop. I tested a live distribution of linux which is bootable from a usb key. When I set the bios to boot from removable devices with my inserted bootable usb key does not start it and comes back to my installation disk hard windows. Is this 1 / a problem with my key/OS or 2 / satellite pro does not boot from USB as a removable device or 3 / require special strikes as for the CDROM?

    TIA

    Marcus

    Hello

    I m not 100% agree with Tobi. As far as I know it s only in a position to initiate the device USB FDD (diskette).
    In addition, you can start form the optical devices and network (LAN) HARD-primary drive

  • Satellite Pro A100 - has no Imaging

    Hi all

    I tried to picture 16 Satellite Pro A100 for several days now. I tried our usual deployment solution called altiris and cela images very well the machine (which means that all files are intact), but when starting says NTLDR error, after looking for awhile, I found that altiris was known to have some problems with SATA disks in function. At this point, I decided to re - build the main image and use Ghost, I tried their exchange of traffic on the network and they picture (the same as previously intact files) but always returned with the same error. Then I tried to drive my main image to another disk drive cloning, once again the same error appeared while my main drive worked fine. I tried all the fixes NTLDR, wrote new boots still with no luck. I don't see it was a hardware failure, because it would be very strange to happen in 15 laptops. What I'm looking for is a form manageable to the Image of these PCs, as they are used in a primary school and will need Imaging regularly.

    Any help or information would be greatly appreciated.

    Thank you

    Jason

    You get an error like this: an NTLDR or NTDETECT.COM not found

    If Yes, this problem may occur if your boot device (for example, a floppy drive, hard drive or CD-ROM drive) does not contain startup files.

    The resolution, you will get here on the Microsoft Web site:
    http://support.Microsoft.com/kb/555304/en-us

  • Satellite Pro A100 - PXE message appears at startup

    I have a problem and I really really really could use some help, its been listen to me for the last two days ive trawled through countless amounts of forums and web pages without success then for a last ditch attempt until I throw it out the window (figuratively) I thought I'd come here for help!

    It's a Toshiba Satellite Pro A100 model No. ' PSAAPE-00Q00KEN

    initially when I started the computer this error message came

    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit Intel Boot Agent.
    Operating system not found

    now, I managed to stop the PXE errors by disabling the Lan built into the BIOS option

    I have check and made sure it is not a disk in the DVD player to the left it doesn't have a floppy drive so it isn't that

    BIOS for some reason usually see the hard drive is a seagate 80 GB HDD Sata, but I know that its fine because it works but in my Dell laptop.
    and my Dell laptop hard drive is not seen in the Toshiba.

    Now that I read all about flashing the BIOS, but I can't because the only download I get Toshiba is one that runs when windows is running (if I can't get it to boot, how do I Flash the bios)?

    I also tried thing BIOS resseting to short-circuit the c88 under the wireless network card, but that didn't work or the other!

    Now is there anything else I can try or do give up and throw it out the window?

    Thanks in advance

    Terrakan

    Hello!

    It's really strange, but it looks like your HARD drive to the motherboard controller is the reason for this because you said that the HARD drive works in another phone.

    Can you please try another HARD drive in this notebook? If another HARD drive works the old HDD is definitely faulty and if not, I think that the motherboard must be replaced.
    So, you can determine what is exactly the problem.
    In addition, I think that there is nothing more you can do at the moment.

    Good bye

  • Very slow Satellite Pro A100

    Has just been given a Toshiba Satellite Pro A100 computer laptop and it works very very slow.

    When no programs are running, the Task Manager process tab indicates that the laptop is about 95% idle, but the performance tab around 50% or more.

    I ran anti-virus, cleaned a lot of software that I use, XP (service pack 3) update and different drivers, but it works still slow.

    I guess I have to re - install XP, but unfortunately I don't have a copy the disk recovery product that came with the laptop.

    Anyone know if I will be able to get your hands on a copy of this disc.
    If it helps, I have two drives available for other XP laptops that I own, but I don't think I'll be able to use them to reinstall this copy of XP using the label of serial number 25-digit number based on the laptop.

    Hello!

    It is possible that it s a software problem, but it might be the case.
    What antivirus or security software internet you use? Have you tried to install another, for example AntiVir?
    In addition, you can do many things to improve performance. Defragment the HARD disk, disable startup programs, clean the registry for example and to this day. Google will help you learn more.

    Finally and above all it is possible to order a recovery disc. So, contact the nearest authorized service provider in your country.

    Good bye

  • Satellite Pro A100 (PSAACE) CD-ROM does not

    Computer: Toshiba Satellite Pro A100 (PSAACE)
    Age: 1 year
    Operating system: Microsoft Windows XP SP2
    CD-ROM: Pioneer DVD - RW DVR-K16A

    Whenever I put a cd in the rom it makes a series of strange noises, hard to explain, but this isn't really mather.

    At the end of the day, I take the cd see nothing hapends don't never no mather how long I wait.
    No error apears but it never had to read the cd.

    I tried a long list of solutions:
    Pilot Uppdate
    Reset dma tool
    Uninstall and reinstall

    Have you tried the method with the disassembly of the upper and lower of certain registry entries filters? If this is not the case, here's the quick tutorial:

    Go to Device Manager and remove the drive from the list of devices CD/DVD.
    Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

    Have you tried if you can boot from the CD?
    If you can, try to reinstall your Windows XP and see if problem persists.

  • Satellite Pro A100: How to get updates for driver for ATI Radeon Mobility X 1400

    Hello

    I am aware that the driver for my on-board graphics card is outdated.
    When I download a updated from ATI driver and try to install, it tells me that I can't install the update the system there and contact Toshiba for the updates.

    Please can someone tell how can I get a driver updates for this card on my Satellite Pro A100 series?

    Concerning

    Macca.

    Hello

    You can not install drivers ATI ATI site because these drivers are not designed and certified for Toshiba laptops.
    These drivers can affect the functionality of notebooks and in worst cases could overheat your GPU

    * So if you want to use these drivers, you can do it but only at your own risk! *

    You can install this driver in Device Manager;
    You must use the Advanced installation procedure and you will have to indicate where the graphic driver files were stored on the HARD drive

    Good bye

Maybe you are looking for

  • Minor scratches on SS 2 series out of the box

    I am very happy that my watch stainless steel series 2 has been delivered today! Hope you are all enjoying your. After an inspection of the watch, however, I noticed very slight/minor/extra fine scratches on the screen, mainly on the top and the bott

  • typing and iPad at the time

    Is there a cable that connects a keyboard and a charger for the iPad 2G mini iPad?

  • Satellite P100-197 will not start

    My laptop P100 (French) was unable to start for the past fortnight or so now. I get nothing on the LCD screen, no BIOS - nothing. If I listen, I hear two beeps on the motherboard to turn on. Some lights are working, but I get no response from the lap

  • SaxParserException: Malformed UTF-8

    I'll analyze the sequence of data in XML format.         Immaculate radio design   Brother Francescains of immaculate   2008   Ave Maria!     Immaculate radio design   Brother Francescains of immaculate   2008   Ave Maria!   But his bird Exception:-S

  • Save the configuration to ASA 5505

    Hi all, I have this problem, I save the configuration to the ASA 5505 help RAM or using the copy, run start but whe I unplug the power cord and plug it back to the ASA gets its default factory configuration... so what I do is a copy start run to get