Satellite Pro A100 - has no Imaging

Hi all

I tried to picture 16 Satellite Pro A100 for several days now. I tried our usual deployment solution called altiris and cela images very well the machine (which means that all files are intact), but when starting says NTLDR error, after looking for awhile, I found that altiris was known to have some problems with SATA disks in function. At this point, I decided to re - build the main image and use Ghost, I tried their exchange of traffic on the network and they picture (the same as previously intact files) but always returned with the same error. Then I tried to drive my main image to another disk drive cloning, once again the same error appeared while my main drive worked fine. I tried all the fixes NTLDR, wrote new boots still with no luck. I don't see it was a hardware failure, because it would be very strange to happen in 15 laptops. What I'm looking for is a form manageable to the Image of these PCs, as they are used in a primary school and will need Imaging regularly.

Any help or information would be greatly appreciated.

Thank you

Jason

You get an error like this: an NTLDR or NTDETECT.COM not found

If Yes, this problem may occur if your boot device (for example, a floppy drive, hard drive or CD-ROM drive) does not contain startup files.

The resolution, you will get here on the Microsoft Web site:
http://support.Microsoft.com/kb/555304/en-us

Tags: Toshiba

Similar Questions

  • The Satellite Pro A100 has a modem 'voice '?

    The Satellite Pro A100 has a modem 'voice '?

    If so, can I make phone calls using the Dialer in MS Outlook with a microphone plugged into my laptop.
    How can I do this?

    Please, don't make it so complicated. As a first step, it would be interesting to know what operating system you are using. On the Toshiba support page you can find sound driver and modem for operating system supported.

  • Satellite Pro A100 has "limited or no connectivity" & no connection to the local network

    Hello!

    I + really + hope someone might be able to help with this - been going slowly crazy.

    Bought my A100 18 months ago in Australia while I lived there and had no trouble to connect to LANs and others with my wireless. Everything was shipped over to me (here in London) last week and everything seems to have gone pear shaped. The House I live in has Wireless Broadband comes with our Sky Cable subscription, working on (I think - there is no real marking on the device) a router wireless Netgear A/G dual band (108 Mbps 802.11 b/g network). My laptop model is: SatellitePro A100 (part No.: PSAACE-007002EN) and it works on the following network hardware (drivers installed in brackets):

    1394 net adapter (5.1.2535.0)
    Intel(r) PRO/1000 PL Network Connection (9.2.24.0)
    Intel (R) PRO/Wireless 3945ABG Network Connection (10.1.0.13)

    I used the Sky Broadband installation disc to set up the network, but every time I try to connect it tells me that I have "Limited or no connectivity" and will not let me online. I've been on the phone for Technical Support of sky for hours, trying to get this sort, but when I plug in the Ethernet cable to the laptop it will not even get to communicate directly with the router (i.e. put the IP address of the router in explore and view the settings of the router). My 'Connectivity Doctor' shows there is a problem with my wireless connection (which the network has not assigned a network address of the computer), but no problem with my ethernet connection and yet neither will allow me to get online and every time that I try to repair the wireless connection I get an error message saying that Windows could not renew the IP address.

    I have disabled the Bluetooth, reset the router I don't know how many times and made sure that all cards have been activated and crosses without bad red and yellow exclaimation in Device Manager. All network devices seem to be "working properly" (according to the properties of the device).

    After days of weeding through the proverbial haystack of resources online while at work, I think that the problem is either something very simple (i.e. a setting random advanced configuration). I read somewhere as you will need to 'install' the router on the system, and that is not "plug and play" as Sky Broadband seems to have deduced by phone... but I would have thought the installation CD has done this, as when I discovered my connections (when the Ethernet cable is plugged in), it recognizes the connection (it won't only ++ anything). If there is no specific process I need to follow in order to properly install the Netgear router (for which I am currently trying to see if there are appropriate drivers, I need to download), I'd appreciate a lot of the age of enlightenment! It could also be a question that I need to reset the network key in the security settings of the router, as there are already three computers in the House connected to the network... but of course I can not do without first sorting on why my laptop can still communicate with the router via the Ethernet connection.

    Points to note:
    -My laptop runs on Windows XP Professional Version 2002 Service Pack 2
    -The disc to install Sky Broadband installed Internet Explorer 7. the last time I was online, I think that I was still using 6.

    If anyone could be of any use to solve this puzzle, you have earned yourself my eternal gratitude!

    -Danielle

    Hello

    I think that the solution should be simple;
    I presume that you TCP/IP settings are false. I mean that the settings should be set to automatically assign the IP address.

    Please check this box. Simply go to the network connections-> local network connections TCP/IP properties properties

    He put everything on automatic

  • Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory?

    Hello

    Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory? Please help I get only 2500 points on 3dMark05 on a Satellite Pro A100-828. The GPU is X 1600 with memory dedicated 128 MB + 384 MB Hypermemory. This card should be approximately 3500 brands.

    Thank you

    Shahid

    I studied in the World Wide Web, and it seems that the X 1600 supports a 128-bit interface
    I not found any x 1600 with 64 bit so I think that it s a 128 bit

  • Satellite Pro A100: Mat * a UJ - 841 s DVD Multi drive does not

    Hello

    I have a Satellite Pro A100 with a carpet * a UJ - 841 s DVD Multi Drive.

    Recently, I decided that as my laptop is running slowly I wanted to format and reinstall XP Pro, I used a standard version of OEM XP Pro (not seller specfic) and he went on the formatting and the reconstruction of my laptop.

    Fortunately, I used Acronis True Image to backup my laptop before I did that my above mentioned dvd player is so more to bury properly (all the drivers and the necessary software has been installed). Before I formatted the laptop I could burn on + and - DVD (r, rw and ram) now that the laptop has been rebuilt, I can only burn to dvd-r/rw/ram.

    I restored from my laptop to the picture created by Acronis and can use the drive normally again to burn + and - DVD.

    Does anyone know why this would have stopped working in the new installation of Windows? I also tried to create a virtual machine using the same xp disc but it always gives me the problem of dvd player.

    Thank you

    Rich

    Hello rich

    Have you noticed the same problem after using Toshiba designed recovery DVDs?

  • Norton Ghost crushes on Satellite Pro A100

    Good afternoon everyone,

    I'm having a problem with a few laptops I have here. I just got a few Satellite Pro A100 but I have problems with making an image of the HARD disk. I tried Norton Ghost and a few other programs that can back up a disk to an image, but none of them worked. For some reason, they all crash when they are tryig to get started.

    I tried it on 3 different PC laptops and failed each time, exactly at the same place. I guess it has something to do with how these programs manage the memory.

    If someone has had this problem before and have you found a solution for this?

    Hello

    I doubt that the problem is something serious. But I can say that your best bet is to bring to an authorized service provider. The hard drive under sometimes is used to disconnect after a bit of work. But this isn't anything you can do to fix it. You must take it to a repair shop and ask them to look at. The reason that Norton blocked is because it cannot read the disk hard because she is not completely connected. I would like to know how this happens. And one last thing, if you want to turn the laptop and to take cover in the lower right and see if the hard drive is seated properly and firmly. Then try to use the ghost.

  • Satellite Pro A100 support Micro SD card?

    Hello.

    I have a Satellite Pro A100 (model PSAAPE - OOTOOKEN).
    It has a card on the front slot and the manual says "this slot allows you to easily transfer data from devices such as PDA and digital camera that uses flash memory (SD/MS/MS Pro/MMC/memory cards xD).

    I want to buy a Micro SD (microSDHC) memory card for use with a tablet PC, I intend to buy.

    My question is, if I insert the Micro SD (microSDHC) card in a SD adapter and insert it into the slot of laptops, laptop will accept for read/write operations?

    I was wondering if I can get away with having one type of card for laptops and tablet, rather than a microSDHC for the tab and a SD card for the laptop.

    Thank you.

    Hello

    The user manual provides information on the supported cards.

    Supported are:
    8 MB to 2 GB SD card
    MMC (multimedia) card 8 MB to 1 GB
    8 MB to 256 MB card MS (memory stick)
    MS (MemoryStick) Pro 256 MB to 2 GB
    16 MB to 1 GB xD memory card

    > My question is, if I insert the Micro SD (microSDHC) card in a SD adapter and insert it into the slot of laptops, laptop will accept for read/write operations?

    Since supports up to 2 GB card SD card reader, you should be able to use the microSDHC in relation to a SD card adapter.

  • Satellite Pro A100-622: disk space HARD lower since I use regitry cleaning tool

    I have a Satellite Pro A100-622 with 80 GB hard drive.

    About a week ago, I used a program I downloaded on internet to clearn registry and improve "performance.
    Since my HDD has been gnawed.

    I deleted programs as much as I could, but even before the cleaning, I never used 30 GB max.
    Have done everthing, disk cleanup, and no sooner got a few MBs, they disappear.

    Don't know what to do now.
    Even tried to reformat the drive using the recovery of products of Toshiba, nothing helps.

    Any ideas?

    Hello

    You mean that 30 GB on the HARD disk are available?

    Check the status of the disk in disk management.
    You can see the entire HARD drive and all the available partitions
    Perhaps a partition has been created and the other part of the HARD drive is unallocated space

    But he s strange this recovery disk didn't solve this usually recovery disk format the whole HARD drive and redefines the laptop to factory settings

    Welcome them

  • Satellite Pro A100 - 4 GB memory motherboard?

    I have this model of Board of Directors: V000068460 there a docking port/blue graphics capabilities of the tooth/footprint/microphone/infra-red/external and pci-e connector for the wi - fi accepts cards pci-e dual use, but the system memory is limited to 3 GB because of the revision of the chipset.

    So no one knows of a compatible Board that offers the same options (infra-red is optional) but has a later chipset revision so that the memory can use 4 GB or almost 4 GB of ram?

    Hello

    As far as I know the Toshiba Satellite Pro A100-196 PSAACE-001009AR supports 4 GB of RAM.

    Google a little bit and found out that the Council V000068140 is compatible for Satellite Pro A100-196

    Hope this helps

  • Satellite Pro A100 - cannot install display driver

    I am updating a Satellite Pro A100.
    I downloaded the update of the display driver but can't install it because it say its longer 88 charicters.

    Anyone has any ideas, tips or suggestions please?
    My goal is to alow the user to be able to play Sims 2 if it is possibe, because I know that some video cards do not support the game (or whatever it is).

    Hello

    I assume that you have downloaded the zip package.
    Rename the package for example in "display driver" and then uncompress the package.
    Then go to the folder where the driver was decompressed and then launch the installation.

    Can you do this?

  • Satellite Pro A100 is not recognized any amount of RAM

    Hello

    I have a Satellite Pro A100 and I just bought 1 GB of additional memory. There are two locations, each with a capacity of 1 GB.
    When I put the new memory into the slot and the old 512 MB original memory in slot B and the computer says it is 1 GB.

    I have them two-way round so that the 512 MB is has the 1 GB in B. Now the computer says that there is 512 MB.
    Is there anything I can do to work B slot? I have the latest version of the BIOS update.

    Thanks in advance.

    Hello

    > original 512K of Ram also works in A slot, but not in the housing B.
    This looks like your slot B is defective, mate :(

    I think that, in this case, you can't. You can swap the card mother but that s all.

  • Satellite Pro A100-830 with 4 GB of memory but the BIOS tells me that I have only 3 GB

    I have a Satellite Pro A100-830 and I bought the maximum memory for what is 2x2gb, for a total of 4 GB in my world. When I put the DIMMs in themselves in a slot, the BIOS reports 2 GB. BIOS Bravo! When I put both together, I see only 3 GB in the bios!

    I found this link on the Crucial site. http://www.crucial.com/kb/answer.asp?QID=4251

    Suggest page files, peripherals etc. occupy memory on your system at startup, before the operating system is used I guess. If you do not have the maximum memory installed, you should see the total memory. If you got the maximum memory installed, you will not see the memory used by page etc. files. Why would it be? Why you would see 2 GB if you have only 2 GB but then see 3 GB if you have 4 GB due to the system!

    Anyone can shed some light on this subject and be eligible or reject the information in this link. I need to replace the memory and/or the pc?

    Thank you

    Mark

    This is not a BIOS problem but a Windows.
    I found this info:
    Windows XP Professional 32-bit is limited to 4 GB of address space. If you have 4 GB of RAM installed, it won't show 4 GB in Windows. You will probably get what the size of your pagefile subtracted the 4 GB.

    Some of this address space is reserved for the hardware and the operating system... so you will never have access to the 4 GB maximum in any case. If you want access to 4 GB of RAM +... your best solution is to pick up XP Pro 64 - bit... but this will only work if your CPU P4 has EMT64. (64-bit)
    You can also try to turn on DEP if it is not already enabled... This will also allow EAP that can give you access to all 4 GB

    So finally a response:
    > Do I need to replace the memory and/or the pc
    -> No, everything is ok... you need not to change the hardware

  • Program to close or crash on Satellite Pro A100

    HAVE THE SATELLITE PRO A100, WHICH I USE FOR MUSIC. I INSTALLED PCDJ AND PROGRAM FROM TIME TO TIME STOP, CRASHES WITHOUT REASON.

    I FOLLOWED THE INSTRUCTIONS TO INSTALL THE PROGRAM, BUT IT CONTINUES TO SE WHICH IS VERY ANNOYING IF I DO A DJ SET AT THE PUB OR CLUB.

    HE DON'T Y HAS NO GROUNDS TO THAT HE CAN STOP AFTER 1 HOUR OR 4 H. CAN SOMEONE AS HELP I HAVE FRIENDS WHO USE IT ON TOSHIBA LAPTOP WITH NO PROBLEMS... PS IT'S NOT PORTABLE THAT BLOCKS ANY PROGRAM...

    Hi AL Karaoke ;)

    For me it s a clear case. Programs crashed due to high temperature.

    > I AM DOING A DJ SET AT THE PUB OR CLUB.

    I suppose that the temperature of the environment is a little higher in the pub or club. In addition, I think that the laptop can not cool properly due to the circulation of air.
    I m sure that the laptop is running properly without any crashes if you are going to use it as a common user. Do not forget that there is enough free space around the laptop for a circulation and cooling properly

  • Satellite Pro A100: Keys to self-retaining post-split alcohol to the keyboard

    Hello

    I recently shared Jack Daniels in my keyboard and now some of the keys have become
    sticky - is anyway to jump keys on clean them?

    My laptop is a Satellite Pro A100

    Thanks in advance,

    Matt

    The key - caps are loose enough easy, you know how they are attached to the base.
    Please be very gentle when you try it, especialy on your first key.

    You will just need to lift the key (perhaps using your nails) of the left and right of the key,... a few seconds later, he's going to jump on you.

    You can build your own tool, too. This is how the dedicated tool looks like:

    http://www.wgonsior.de/images/Galerie/DSC05716.jpg
    http://www.wgonsior.de/images/Galerie/DSC05715.jpg
    http://www.wgonsior.de/images/Galerie/DSC05714.jpg

    Please keep in mind that some keys like SPACEBAR are very sensitive and have a slightly different mechanism.
    Oh yes, one more thing. Please don't blame me if you break something... I've seen people hammering on their keyboard to remove dirt and were angry after they broke something.

    Best regards

    Good luck
    chain

    PS Lucky it was just of Jack Daniels, Bacardi would be worse :D

  • Battery for Toshiba Satellite Pro A100 M50

    The battery in the laptop model was PA3399U-2BAS. A vendor has sent a substitute - his number is PA3399U-1BRS. He says he has 95% of its capacity, but when the power cord has been removed from the laptop is dead and will not re-start without plugging the cord back in.

    This battery would have an acceptable replacement? The laptop is running on its battery at reduced capacity and needs to be replaced.

    Any thoughts?

    Just for your info:
    Toshiba Satellite Pro A100 specifications you can use batteries follow
    PA3399U-2BRS (6cell),
    PA3399U-2BAS (6cell),
    PA3478U-1BRS (9cell),
    PA3478U-1BAS (9cell),
    PA3400U-1BRS (12cell),
    PA3400U-1BAS (12cell).

    Start your laptop with AC supply and battery, put the battery and if the battery is correctly recognized remove power supply.
    The same thing happens again?

Maybe you are looking for

  • What type of memory I need for the Satellite A100-906

    What types of memories takes charge of this laptop?DDR2-533, 667 that's all? 800 media?

  • PSC 1510 guard printing alignment pages, won't allow me to use scanner

    My 1510 keeps printing alignment pages (or gives me an error of paper output).  I do not use the color cartridge and haven't for a long time. Now when I try to scan a document it says that something is in control of the scanner (probably the alignmen

  • Cannot access files on my old computer with easy access of Windows

    I can't access my files on my old computer with easy access of Windows.  Whenever I go through the process, he crosses to examine what can be transferred and then displays a message "windows easy transfer cannot log on to your domain account. What ar

  • Presario V6000TX CTO Sata drivers

    We had a hard drive failure and I replaced the internal drive. When you try to load XP Professional, it does not detect the HD and I need to put on a floppy disk sata drivers. Unfortunately, I can't find the sata drivers on the HP site and HP will no

  • WRT 400n lost internet

    I have been using my wrt400n(v1.0.01 B19) for several months now, and with the exception of the security set and get the "n" to run it worked fine until this morning.   Woman woke up before me, connected to facebook/farmville, etc. and was running.