Satellite Pro A100: How to disable the card Board?
How can I disable the on-board its on my Satellite Pro A100?
I can't find an option in the BIOS.
And it is also possible to use the card reader with Ubuntu Linux?
It is not up the cards.
You want to disable an internal device?
I wonder why
However, you can disable it in Device Manager should mark the sound card, and then turn off.
> And it is also possible to use the card reader with Ubuntu Linux?
Why do not you will need a Linux driver that would be compatible with the card reader.
As I m not wrong not the driver is from Texas Instruments
I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
My son has a laptop and gets a good connection anywhere in the House and even outside.
He thinks I have a dodgy wireless adapter, this could be the problem?
Can I fix it myself?
Maybe download a new driver?
Any suggestions would be much apreciated.
TOSHIBA SATELLITE PRO A100
Your ad is not really useful.
I mean that there is no detail about your problem
You should first check if the laptop supports the wireless network card.
This can be done in the Device Manager.
Usually the WLan card must appear in Manager devices-> network adapters.
If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).
But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.
Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)
Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:
1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?
Thanks in advance
These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.
Here you can download:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
Good luck! :)
Is it possible, and how, to disable the shortcut keys for the camera wizard?
The default keys interfere with shortcuts of Microsoft Office (Word) - for example Alt + F9 to show/hide codes field to turns on the properties of camera assistant, Alt + 10 screen settings of camera etc.
I find this very frustrating.
Of course you can turn it off.
You must remove the software from the camera in msconfig start up.
So go to start-run-msconfig online online
Go to the Startup tab and disable the camera software. Restart the computer laptop and that s all!
I have a Satellite Pro S200,
I'm unhappy with my digital volume.
Dial whenever I work the volume control.
Is there a way to disable this annoying feature?
was soon simon
The volume indicator belongs to the Toshiba control utility.
The exe file is called Volumeindicator.exe
On my laptop, this tool is running in the background of the OS and I can disable in msconfig-> Startup tab
Select this check box.
Run msconfig, go to the Startup tab and uncheck the Volumeindicator.
Then, you will have to start again.
I don't like my integrated webcam.
So I bought a new.
But I want when the video call feature or something that have integrated starts up not my logitech one.
How I can either:
Disable my only integrated? [note: I have uninstall the software, but it always does.
Make my logitech one by default if its used each time?
Help please its stressing out me!
I have a Sat Pro L300
Thank you guys!
I put t know what software you use but generally you can always choose the favorite webcam or microphone in the settings of the software.
For example, I use Skype and Skype settings, I can choose between the internal webcam and my external webcam.
In addition, you can disable each device in the Device Manager I that you would disable a Red Cross, then it should appear to the disabled device (webcam)
See you soon
I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.
The laptop is running Windows 7 64 bit
What card WLAN have you had before and do the work of a former?
I think that it of difficult to say why it doesn t work but maybe this card is not compatible.
By the way: do other FN keys FN + F8 work or simply not?
Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
in this case it would be interesting what Type of laptop it is exactly.
You will find this model on the bottom of your laptop. There is a review of it.
Some models have a Bios update available, others not, for example.
Please send additional information!
I am aware that the driver for my on-board graphics card is outdated.
When I download a updated from ATI driver and try to install, it tells me that I can't install the update the system there and contact Toshiba for the updates.
Please can someone tell how can I get a driver updates for this card on my Satellite Pro A100 series?
You can not install drivers ATI ATI site because these drivers are not designed and certified for Toshiba laptops.
These drivers can affect the functionality of notebooks and in worst cases could overheat your GPU
* So if you want to use these drivers, you can do it but only at your own risk! *
You can install this driver in Device Manager;
You must use the Advanced installation procedure and you will have to indicate where the graphic driver files were stored on the HARD drive
Can you help me?
My English is bad I do not end.
The question is:
My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.
I want to know what's wrong
Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
Her check first because otherwise, you can get the WLAN to work.
In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
After this Free Config should find your WLAN router if you are in the range of that.
I have a Satellite Pro A100-198 with a core duo processor. I would like to replace the processor of a Satellite Pro A100 830, which is Core2Duo in the Pro A100-198. They both have the same chipset-expected-they be any problem with that? This would increase the clock speed of 1.66 GHz to 2.0 GHz. They all have two Intel 945 PM Express chipset.
I just upgraded from XP to Windows 7 32 bit and the performance score is 3.4. My BIOS version is 1.9 and I see there is an upgrade to win all the version 6, but I can't find the BIOS version history - it is better to upgrade. For the moment, I'll see if there are problems.
Thanks in advance Mick
Post edited by: mdfcv
As far as I know the two books belongs to the PSAACE series. Can you confirm this? You can find this information on the underside of the laptop.
Normally if the books belong to the same series, it should be possible to exchange the CPU. They use the same hardware, so you can exchange.
But don t forget this isn't supported CPU upgrade. If you have the warranty you will lose it. Other s CPU are pre-tested not on your laptop.
Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.
But now, he's just on stand by.
How can I get this back to how it was (having to press the button to exit stnd - in)-help!
I tried to turn off Toshiba power saver and using the windows settings but nothing
I have treid working :(
Can anyone help?
I get at the end of my home with this computer laptop blinkin :(
I managed to spill beer on my keyboard, and now some keys no longer work. This is the version for the Satellite Pro A100 Uk. Can anyone recommend a place that sells the replacememts, because I can't seem to find anywhere in England.
Otherwise, advice on fixing?
Thanks in advance,
All the parts for your laptop, you can buy from the Toshiba service partner in your country.
ASP in the United Kingdom, you will find this Toshiba site under find authorized service partner.
In addition, you can also visit this Toshiba options & Accessories site.
HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOP
There, you can search the compatible keyboard.
To replace the keyboard you have first of all remove the thin cover above the keyboard (F-keys)
Then, you must remove the screws that attach the keyboard. Then, it should be possible to leave the keyboard. But be careful. The keyboard is connected with the flat cable to the motherboard.
I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.
Any suggestion? Thank you!
I think that in this case, you can use a network switch.
Is there anyway to turn off Turbocache because it is share 527MB of RAM. 256MB will do me well
I put t think that it of possible to disable the nVidia TurboCache graphics card.
In any case, check the settings in the nVidia control panel.
Try to set the Advanced view for even more options!
But this option is only a slight hope I do not know if you find something on Turbo Cache m.
Maybe you are looking for
Sir I am using LabVIEW imageprocessing machine visionsoftware... I use Easy capWireless USB 2.0 camera...device camera driver is not supportedmeasurement and automationExplore... What's the problem? To giveme solution sir...
I want to understand the symbols of the international phonetic alphabet, particularly those in the English language, in my WORD 2007 document. Here are the symbols you see in a good English Dictionary, against every word listed, indicating how it is
And do not know what to do. looked in Control Panel and hosting centre. I'm only a novice with computers, but was tryin to clean up the mass of the toolbars at the top and even lost the command bar. Can anyone help please?
This is the error code I get. Account: 'pop.charter.net', server: 'pop.charter.net', Protocol: POP3, server response: '-ERR a user name is REQUIRED ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC91
Hi, first time here. I just opened the box on a brand new hp envy 4507.I'm stuck at the first hurdle! I inserted the ink cartridges supplied with the printer and the screen bed "incompatible cartridges not intended for the use of this printer.In case