Satellite Pro A100 - NMI memory parity error parity check

Similar Questions

• Satellite Pro A100-81: memory Pro Duo card is stuck in the card reader

  I am the proud owner of a Satellite Pro A100-81. I inserted a Duo Pro Memstick into the slot of the card reader...

  The card slipped too deeply into the slot so that I unfortunately can't remove the card more.
  Any ideas how to remove the card?

  Hi Gary

  Are you sure that the laptop computer s card reader supports memory stick Pro Duo?
  It s unusual who supported cards will slip to deep into the slot, something as may occur if the card is not taken in charge and is not compatible with the slot

  However, you shouldn't t do anything hard disk average if you n t know how remove it ask someone to help him with more experience for laptop

• Upgrading RAM on Satellite Pro A100-840

  The specification for the Satellite Pro A100 840 said that memory has a maximum of 4 GB of memory. But it does not seem to be all provided by Toshiba that allows me to level to 4 GB of memory. This current has the default 1gn that was shipped when ordered. Anyone know how to get the 1 GB to 4 GB?

  Thank you in advance for any help

  Hello

  I just wanted to check the specifications of the laptop but I was not able to find the Satellite Pro A100-840. Can you please check laptop model and send us the laptop model number.

  In any case I really don't understand what your problem. It seems that your model of laptop can handle with 4 GB RAM max. According to your assignment, your laptop comes with 1 GB of RAM.

  So if you want to use the maximum RAM on your laptop satellite, you must buy RAM 2 X 2 GB module. As far as I know, 2 GB RAM module are available and if you want to be sure of compatibility please check the Kingston products.

  Please check this Kingston Memory Configurator

• Satellite Pro A100 - 4 GB memory motherboard?

  I have this model of Board of Directors: V000068460 there a docking port/blue graphics capabilities of the tooth/footprint/microphone/infra-red/external and pci-e connector for the wi - fi accepts cards pci-e dual use, but the system memory is limited to 3 GB because of the revision of the chipset.

  So no one knows of a compatible Board that offers the same options (infra-red is optional) but has a later chipset revision so that the memory can use 4 GB or almost 4 GB of ram?

  Hello

  As far as I know the Toshiba Satellite Pro A100-196 PSAACE-001009AR supports 4 GB of RAM.

  Google a little bit and found out that the Council V000068140 is compatible for Satellite Pro A100-196

  Hope this helps

• Satellite Pro A100-830 with 4 GB of memory but the BIOS tells me that I have only 3 GB

  I have a Satellite Pro A100-830 and I bought the maximum memory for what is 2x2gb, for a total of 4 GB in my world. When I put the DIMMs in themselves in a slot, the BIOS reports 2 GB. BIOS Bravo! When I put both together, I see only 3 GB in the bios!

  I found this link on the Crucial site. http://www.crucial.com/kb/answer.asp?QID=4251

  Suggest page files, peripherals etc. occupy memory on your system at startup, before the operating system is used I guess. If you do not have the maximum memory installed, you should see the total memory. If you got the maximum memory installed, you will not see the memory used by page etc. files. Why would it be? Why you would see 2 GB if you have only 2 GB but then see 3 GB if you have 4 GB due to the system!

  Anyone can shed some light on this subject and be eligible or reject the information in this link. I need to replace the memory and/or the pc?

  Thank you

  Mark

  This is not a BIOS problem but a Windows.
  I found this info:
  Windows XP Professional 32-bit is limited to 4 GB of address space. If you have 4 GB of RAM installed, it won't show 4 GB in Windows. You will probably get what the size of your pagefile subtracted the 4 GB.

  Some of this address space is reserved for the hardware and the operating system... so you will never have access to the 4 GB maximum in any case. If you want access to 4 GB of RAM +... your best solution is to pick up XP Pro 64 - bit... but this will only work if your CPU P4 has EMT64. (64-bit)
  You can also try to turn on DEP if it is not already enabled... This will also allow EAP that can give you access to all 4 GB

  So finally a response:
  > Do I need to replace the memory and/or the pc
  -> No, everything is ok... you need not to change the hardware

• Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory?

  Hello

  Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory? Please help I get only 2500 points on 3dMark05 on a Satellite Pro A100-828. The GPU is X 1600 with memory dedicated 128 MB + 384 MB Hypermemory. This card should be approximately 3500 brands.

  Thank you

  Shahid

  I studied in the World Wide Web, and it seems that the X 1600 supports a 128-bit interface
  I not found any x 1600 with 64 bit so I think that it s a 128 bit

• Error in device IO on the Satellite Pro A100

  I need your help

  I do Win Xp update and PRECAUTIONS Paltalk after that my DVD/CD is broken

  Error message I get: "D:\ is not accessible. The request cannot be performed because of an i/o device error."

  For your information, I have the Toshiba Satellite Pro A100

  Try to remove the drive from Device Manager. After the withdrawal, please restart the laptop. The operating system should recognize the drive again and you could check the functionality.
  But to me it looks to your training goal is dirty and it is unable to read the disc.
  Try to clean it, use a lint cloth and as the part of the lens is delicate, being very soft when you rub.

  I found that also this two links provided a useful info:
  http://support.Microsoft.com/kb/321641/en-us
  http://support.Microsoft.com/kb/891894

  guys good luck

• Satellite Pro A100 - 828 Max memory speed

  Hello

  Can someone please tell me the max speed of memory for Satellite Pro A100-828, I'm wanting to move to the 4 GB maximum but is some sites say the maximum speed is 533 MHz while others say to 667 MHz. For example, the Toshiba site lists only memory 533 MHz under the "Compatible" Options yet other sites list 667 MHz memory as compatible.

  Thanks for your help.

  Hello

  You should check which bus (FSB) front would support.
  Install the hardware diagnostic tool like Everest home edition, and you should be able to find this value.

  If your chipset would support 667 Mhz then you can use these modules and the modules would go with 667 Mhz too.

• Satellite Pro A100 PSAASE: error Power Saver and LAN? After downgrade to XP

  Hello
  I have a toshiba satellite pro A100-psaase!
  I could not find this model on the toshiba site, so I chose the A100-psaas software.

  The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.

  I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.

  My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.

  The funny thing is that I have internet and all.
  I can't find a solution to these two problems
  Thanks again

  Hello

  You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
  I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
  Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.

  The LAN drivers are also published on the page! There are 2 different versions. Try them both!
  The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!

  Good day

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Cannot remove cover memory! Satellite Pro A100

  Hello, I am sorry to say that I am not able to remove the cover of the memory on the bottom of my laptop (satellite pro a100-491). I learned from the user guide that there is that a single screw to open the cover. But despite remove the screws (to the extent possible) the lid does not move. I don't want to use force so I wondering if theres a trick to open easily. I tried really a lot before posting here.
  If anyone can help me I would be very grateful.
  THX kai

  Hello

  Simply replace the cover with a little force.

  Good bye

• Where to find bars of memory 2 GB for Satellite Pro A100

  According to the Toshiba site, the A100 has 2 memory slots for up to 2 GB per slot, but I can only find 1 GB max cards. Anyone know where I can find 2 GB cards?

  With the card, you mean the memory modules?

  You Satellite Pro A100 must be a unit of PSAACE-xxxx series because AFAIK other A100 Pro supports only 2 GB of memory.

  In any case, someone posted a useful link to the site to upgrade memory. I found this:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26257&ft=m&St=3

  I chose the ProA100-828 because I put t know what exactly your unit.
  However, there is a 2 GB module shown.

  By the way: 200 pin DDR2-533 SODIMM modules are compatible!

• Satellite Pro A100-229 - Incompatible of CRUCIAL memory

  Hello friends,

  Just bought memory upgrade for my Satellite Pro A100-229 in Crucial.com but these modules do not work in my laptop?

  Details of the product is:-_ * CT12864AC667.8FG (1 GB SODIMM DDR2 200PIN 128 M x 64 PC2-5300 * _).

  Does anyone know what memory modules will work in my Satellite Pro series please?

  Or y at - it anyway I can make these modules work please?

  Thank you very much.

  Hello

  If the modules are not compatible so you won't get work
  I think you should check some Kingston modules: * DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM *.

  I ve bought some Kingoston modules and they are working properly.

• Satellite Pro A100 support Micro SD card?

  Hello.

  I have a Satellite Pro A100 (model PSAAPE - OOTOOKEN).
  It has a card on the front slot and the manual says "this slot allows you to easily transfer data from devices such as PDA and digital camera that uses flash memory (SD/MS/MS Pro/MMC/memory cards xD).

  I want to buy a Micro SD (microSDHC) memory card for use with a tablet PC, I intend to buy.

  My question is, if I insert the Micro SD (microSDHC) card in a SD adapter and insert it into the slot of laptops, laptop will accept for read/write operations?

  I was wondering if I can get away with having one type of card for laptops and tablet, rather than a microSDHC for the tab and a SD card for the laptop.

  Thank you.

  Hello

  The user manual provides information on the supported cards.

  Supported are:
  8 MB to 2 GB SD card
  MMC (multimedia) card 8 MB to 1 GB
  8 MB to 256 MB card MS (memory stick)
  MS (MemoryStick) Pro 256 MB to 2 GB
  16 MB to 1 GB xD memory card

  > My question is, if I insert the Micro SD (microSDHC) card in a SD adapter and insert it into the slot of laptops, laptop will accept for read/write operations?

  Since supports up to 2 GB card SD card reader, you should be able to use the microSDHC in relation to a SD card adapter.

• Satellite Pro A100 - it does not recognize 4 GB of RAM

  Hello
  today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.

  After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)

  Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.

  (The processor supports 64-bit (core2duo t5500))

  concerning
  Kai

  Hello

  What Satellite Pro A100 you have exactly?
  As far as I know that some models can only be upgraded to 2 GB of RAM.

  It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
  I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?

  Welcome them