Satellite Pro A100 PSAACE - the touchpad buttons do the same action

Hello

I have a problem with my left button touchpad keys. Although the affected software the left click function, he always does the same action as the right button.
Drivers and installation of Windows are new. Is this a hardware or a software problem?

Kind regards
Oliver

Hello

> Is that the hardware or a software problem
It's not easy to say, but have you checked the touchpad features using the OS preinstalled Toshiba?

Usually, the touchpad should work without problems using the original image of Toshiba.

May I ask what model of laptop and what OS do you have?

Tags: Toshiba

Similar Questions

  • Satellite Pro A100 PSAACE - no DVD drive detected

    I recently bought a Toshiba Satellite Pro A100 PSAACE a friend and make home and implement market realized that the dvd drive is not detected by the laptop at all.

    The drawer opens normally, and when I close it the light flashes orange little but no detection at all!

    Help, please! Gets very frustrated by that.

    Hello

    Optical drive not recognized for the BIOS is or is not listed in Windows Explorer? CEN you report State in Device Manager?

  • Satellite Pro A100 (PSAACE) CD-ROM does not

    Computer: Toshiba Satellite Pro A100 (PSAACE)
    Age: 1 year
    Operating system: Microsoft Windows XP SP2
    CD-ROM: Pioneer DVD - RW DVR-K16A

    Whenever I put a cd in the rom it makes a series of strange noises, hard to explain, but this isn't really mather.

    At the end of the day, I take the cd see nothing hapends don't never no mather how long I wait.
    No error apears but it never had to read the cd.

    I tried a long list of solutions:
    Pilot Uppdate
    Reset dma tool
    Uninstall and reinstall

    Have you tried the method with the disassembly of the upper and lower of certain registry entries filters? If this is not the case, here's the quick tutorial:

    Go to Device Manager and remove the drive from the list of devices CD/DVD.
    Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

    Have you tried if you can boot from the CD?
    If you can, try to reinstall your Windows XP and see if problem persists.

  • Satellite Pro A100/P100 - compatibility touchpad

    Hello

    I have a Toshiba Satellite Pro A100 and I saw pictures and videos on the internet of people have these keyboards LCD that illuminate blue and have shortcuts but only touchpads I can find like that correspond to the P100 and ino models some of the parties each other as I was ve documented but I can t can't find if the touchpads do or not but I think that s what other people I saw someone do any ideas?

    Thank you to

    Hello

    The two models of laptops are old enough, is not easy to find some useful information on this subject. I remember that some P100/A100 and A200/P200 / X 200 models were offered with these keyboards.

    I m not a technician but I think these keyboards with keys have two cables must be connected to the motherboard and keys touchpad without buttons have a flat cable only.
    (I also believe that models with and without this touchpad have different numbers) model numbers) so it is possible that they have different mothers.

    What you need is a professional help with this. I mean, if possible, try to contact nearest Toshiba authorized maintainer and ask for help. They have access to the database of Toshiba and can check the specification for your laptop model but also data base for all hardware components of portable.

    They may be able to help you with this.

  • How to change the module RAM in Satellite Pro A100 (PSAACE)?

    Hey,.

    I just bought a RAM module to fit in my currently empty home of RAM, but I never installed any portable computer memort before that. I checked a few guides, but none seem to show the kind of clips that have the Pro A100.

    Could someone help me please by pointing me in the direction of a specific guide or taking their time to explain the process.

    Thank you in advance.
    Jason

    On the side at the bottom in the middle is placed the memory cover. Remove it and you'll see two memory slots there. I assume that your device comes with the memory module and new you must put in the empty socket and just press it. Two metal brackets will fix it in the right position.

    That's all you need to do. By the way: before you start doing anything, I recommend you disconnect AC power and also to remove battery.

  • Satellite Pro A100 PSAACE: cannot install the ATI display driver

    Hi all

    I experienced a series of problems with my card graph Mobility Radeon X 1400 that I'm sure that can be resolved by downloading the latest drivers. What I have to do on the Toshiba site like the ATI site offers no support for it. But I've known several problems to download the file archive.

    He always says that there is an error: 'error header... ". (missing or corrupted) "and he asks me to redownload the file, I did this three times now, with the same results, I'm starting to get a little frustrated - can someone + please help. I noticed that the file downloaded (and useless) is smaller (by more than 50%) than the expected size - I don't know if this helps all the...

    Preemptive thanks if you can help me with this problem.

    Hello

    What to say I noticed that drivers download server is very slow. Resembles overload eventually all packages have not passed correctly and so this error message is displayed.
    I know that this could be very frustrating and I really understand you because I tried to download the other driver and performance is really slow, but I put t see any other solution than to try to re-download the graphic driver package

    Good luck buddy

  • Satellite Pro A100 (PSAACE) - do not display

    Hi all

    You have a problem that has confused me.

    A few weeks ago my very old a100 Sat Pro (PSAACE) began to refuse to display anything on the screen.

    It comes to boot, that is, I press the power button on the cold, the system of vortices and fan will both nothing appears on the screen.

    I left the cell only and noticed she appeared on my network, so I have remote desktop connected to and everything worked, but still no display on the laptop actually.

    Thinking that perhaps it would be a weird configuration that I started by pressing Fn + F5 to switch between views, at this point, I managed to get a display on the laptop screen.

    But at the next startup, it does the same thing, that lasted a few days with me by pressing Fn + F5 to get a display.

    Then the Fn + F5 has stopped working, I was still able to remote desktop and use the laptop but I couldn't get anything to display.

    In windows, the ATI Mobility 1400 had disappeared from the Device Manager.

    I thought that the controller VGA card had blown to order it a new.

    I mounted this now, and it has not solved the problem. The Fn + F5, workaround works sometimes, but give a very weird-like display corrupt fonts etc.

    * However if I do a screenshot it and the screen on another PC and fonts appear normal. *

    The 1400 mobility is now recognized by Windows, but still nothing on the screen at during the POST, boot, or Windows.

    Fearing corruption BIOS I re flashed with the official BIOS 6.00.

    All in all the machine works fine, just no display or by pressing Fn + F5 I can sometimes get the corrupted + with screen.

    Finally, I hung on an external monitor, at no time do get any screen top regardless of the Fn + F5 or windows, POST etc...

    Any thoughts? A defective cable of LCD/FL would cause this type of problem? or even a faulty inverter Board? or because I don't have any external display I'm looking for a failure of the main card?

    Happy to make all new test someone can think...

    Thanks in advanced for the help

    Richard

    > Any ideas? A defective cable of LCD/FL would cause this type of problem? or even a faulty inverter Board? or since > I have no external display I am looking at a motherboard failure?

    I understand you; you don t get anything on an external monitor?
    Hmm, in my opinion it FL s inverter not given that the FL inverter controlled only a screen backlight
    So even if the FL inverter would be defective, you'd see something on the external monitor, but very weakly.

    Cable LCD/FL problem? Perhaps, but if the cable is defective you wouldn't see anything, even using Fn + F5 key combination.
    So finally, it could be a motherboard problem. But just a guess

  • Get Bluesceen on Satellite Pro A100 (PSAACE)

    Hi all

    I have big problems with my laptop. He started 2 months when I finally had free wireless internet. On using it, I kept getting the BSOD and thought it was a problem with my RAM. After some trial and error results achieved, it wasn't my ram still getting BSOD. I disabled wireless and used for some time, then again BSOD and startup problems. I thought that maybe a virus, so I ended up formatting my drive (as he needed anyway), but still get BSOD with error code:

    DRIVER IRQL NOT LESS OR EQUAL

    0x000000D1 (0x0000c79B, 0 x 0, 00000002 00000000, 0xF70CA16E)

    I checked on the net but no resolution. I'm about to re - install all drivers, but I think it is definitely a hardware problem because I noticed when I move around it fails always start the first time. I am running XP PRO and Bitdefender Total Security 2008. I have 2x512mb ram what do not the same but both the same specification. Any ideas anyone?

    Hi friend

    I agree, it is definitely a hardware problem. I had a Satellite A100 (PSAAE) and the BSOD appeared too. After sending the machine to a repair center and 1 week of waiting, the error never appeared again.

    Is the machine still in warranty? If so, then send it immediately to an ASP, otherwise, I'm selling the machine and buy a new one.

    Welcome them

  • Satellite Pro A100 (PSAAC) with WIN XP - shutdown problem

    I have problems with my laptop stops not when I ask to do. The message that TSrsTRAYWND isn't closing arrives and I'm invited to manual closing. Even if I do this, the machine "blockages" and does not shut down. I tried the boot without failure and closure then - it does correctly, but then when I start normally and try to stop, it is up to the "hanging" again. The operating system and other programs are fully up-to-date.

    Can anyone suggest one solution, from other online for one, I see that others have the same problem, without a solution yet.

    In anticipation of your help, thank you!

    PS - I can't find any reference to the TSrsTRAYWND anywhere.

    Hello

    I tried on my laptop for a TSrsTRAYWND.exe file but I could t find anything. If you search for this file on the HARD drive you get a result?

    I think it has something to with the drivers/software that will be loaded on Windows start. You should try to disable all programs in msconfig-start up that you don't need online. Then try again.

    Sorry, but everything that s what I can say at the moment.

  • Drivers Ati Vista will not install on Satellite Pro A100 PSAACE

    I saw a number of other users in the forum with the same question. I looked a little further on my machine, and it seems the driver saves oneself is not worl or there is a hardware fault with the graphics card.

    Here, it's put him the catalyst installation error report...

    Catalyst® Install Manager
    Installation report
    Thu, July 12, 2007 13:28:08

    Hardware information
    Name of the ATI Mobility Radeon X 1400 graphics card
    Manufacturer ATI Technologies Inc.
    Device ID 0 x 7145
    Vendor ID 0 x 1002
    Code of the class 0 x 030000
    Revision ID 0x00
    ID subsystem 0xff10
    Subsystem vendor ID 0 x 1179
    Other materials

    Existing packagesATI Catalyst Install Manager
    Catalyst Control Center
    Microsoft Visual C++ 2005 Redistributable

    Packages for installation
    ATI Catalyst Install ManagerFinal status:
    Version of the article: 3.0.504.0
    Size: 20 MB
    DriverFinal ATI display status: failed
    Version of the article: 8.31.100.32
    Size: 90 MB
    Catalyst CenterFinal status:
    Version of the article: 2.0.2519.38216
    Size: 150 MB
    Microsoft Visual C++ 2005 RedistributableFinal status:
    Version of article: 7.3.0.0
    Size: 10 MB

    Other devices detected

    Error messages
    Driver installation: installation failed
    Installation of the application: failure

    After the execution of the executable, I tried to install the driver maually locate the files in the driver package, while windows recognizes the inf file, it gave an error saying that it could not read the device...

    Hello

    What graphics driver you used?
    One from the ATI Web site or the graphics driver for the Toshiba page?

    You must use the graphics driver on the page because Toshiba that these drivers are designed and specially modified for Toshiba laptops!

    I tried to use the graphics drivers for example, nVidia page, and I was not able to install it automatically.
    I find on this forum that the graphics drivers from Toshiba are slightly changed to prevent overheating of the graphics card.

    Due to a high performance graphic map of the temperature increases and can damage some parts inside the laptop.
    The graphics driver prevents the increase in temperature and slows down the performance of the graphics card. If temperature decreases the performance increases.

  • The Satellite Pro L20 L25 the same case?

    Fit cover laptop of Satellite Pro L20 to L25 Pro Satellite motherboard?

    I can't say for sure, but I think so.
    I guess L20 is European and WE must have a model L25.

    There is no big difference in General.
    What you should check are available ports. Make sure that both models have exact same ports and port openings.

  • Satellite Pro A100 (PSAAC) DVD-RAM UJ - 841S cannot read audio CDs

    Sat Pro (psaac) DVD-RAM UJ - 841S will not read or play the audio CD
    Everything else works fine but put in any audio cd and nowt.
    Help?

    Hello

    As you know, each CD is compatible and supported by each optical drive.
    Can I ask you this and audio CD don t work? These are original audio CD or burn one?
    You should know that many new audio s CDs come with copy protections of different and sometimes it happens that these CD s are not readable.

    But we must first know if need all options are enable. To do this you must enter the properties of the drive and check if the option enable digital CD audio for this CD-ROM device has been activated successfully.

  • Satellite Pro A100 (PSAACE) - Display driver for Windows 7

    Hello

    My A100 works under Windows XP (video: ATI Mobility Radeon X 1600), but in Windows 7 video graphic standard is 4 MB? Does not have the required driver in Toshoba-downloads (95MB) - no hardware compatibility? Windows 7 is so virtual env. slooooowly...

    Can someone help me?
    Thanx.
    Minnikon

    Hi Minnikon,

    And why the page display driver Toshiba doesn't? You get an error message or something else? What happens exactly?

    In General, the chipset driver must be installed everything first. Then, you can install the Toshiba page display driver.

    Check this box!

  • Satellite Pro A100 (PSAAC) - freezing for a second unknown device

    Hello

    I have recently reinstalled Windows on my computer, after installation, is a problem. With an interval of 10-15, my computer hangs at about a second - the computer reacts to the entry, and if a sound is played he repeats again and again.

    I don't know if it has something to do with it, but when I start the computer I get the error message "cannot read the Manager!" I noticed that I have a unknown device in my device manager, location: location 65535 (internal Bus High Definition Audio). I can't find the driver.

    I don't know if the problems are related, I just want the freezing part to fix.

    Best wishes
    Hans

    Hello

    you have installed a sound card driver? Anyway, how to identify the unknown device, read here:

    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  • Satellite Pro A100 - PSAACE: Installation of BT is Frost

    PROBLEM WITH BLUETOOTH! When I had XP everything was OK, but one day, this icon on the system tray began to be red (disable Bluetooth) I tried to turn on using FN + F8 but it doesn't help.
    I tried to reinstall the application "Bluetooth Stack" but each time the application starts correctly then freezes after the first screen. I decided to change the system for Windows Vista Business, but when I try to install BT Stock on the sill fresh system freezes.
    I installed battery BT using the silent method (unzip the files when it performs file that can do this). But the Bluetooth is still don't DO NOT WORK! It shows Bluetooth when click FN + F8 but nothing happens.

    That is really important in what order I install the drivers? Where can I find order. I tried to find it-without results.

    Is a "Bluetooth ACPI" device in the Device Manager still available?
    Have you visited the following Web site? :
    http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking

Maybe you are looking for