Satellite Pro A100 PSAAPE: WLan signal off the power switches when you restart

I have a pro satellite a 100 psaape.
Whenever I reboot the signal turns off wireless.
I have to manually enable the wireless switch to get a signal to go online.

Is this normal or is at - it a way to get this automated so that it is always on.

Hello

This is normal since the needs of subssystem wireless initialized manually by the user. But I think it should probably be an option to automate the it.
I would like to check it out and give some feedback. On the other side, you should look for some options like 'turn on wireless to start windows' and so on...

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite Pro A100 - where can I find the driver for ethernet controller?

    I recently changed my OS from Vista to XP and I'm not able to find a driver for the ethernet controller in my Satellite Pro A100 PSAAPE.

    Anyone know where I can get this driver from?

    Thank you!

    > I had already checked and cannot see the pilot
    I don't believe that. I checked the Toshiba download page, and you can see two LAN drivers for your model laptop.
    Install the latest version 9.2.24 and I think everything will be OK.

  • Satellite Pro A100-CS3: try to identify the laptop

    Hello

    My wife received a laptop to use with his work. It is marked as a Satellite Pro A100 CS3. I tried to find the drivers for the WIFI (Win XP) but no Toshiba site does recognize the A100-CS3. Can someone help me out here. Thank you.

    It is also called PSAACE, so work on that assumption, that of WLAN driver I need - Intel or Atheros?

  • Satellite Pro A100 does not connect to the internet if the power adapter is plugged

    Hello
    I have a Satellite Pro A100
    The machine will connect to internet on battery OK. However, if the power supply is connected it does not connect. Any ideas?
    See you soon
    Jim

    Hello

    How do you connect to the internet? With the WLan or cable LAN?
    It s very unusual as the intermits connection when the power adapter is connected.

    This question appears because you buy the laptop?

  • Re: Satellite Pro A100 PSAAPE - can't get to POST 4 GB on board

    Tried to upgrade RAM from 1 GB to 4 GB.

    I use the pair of Kingston KVR533D2S4 / 2G (2 Gb PC2 - 4200 CL4 200 - Pin SODIMM Modules).

    However, I can't the A100-PSAAPE post with 4 GB on board.

    It works well with a single module (in each slot) and pointed out 2 GB of RAM.

    TOSHIBA knowledge base makes the following reference:

    * Requirements for the use of 4 GB of main memory *.
    + The BIOS must support the memory remapping feature. +
    + The memory remapping feature allows for the segment of system memory which was already crushed by +.
    + PCI configuration space to be remapped above the 4 GB address line. +
    + The newer BIOS versions support this feature. +

    * _My Questions_ *.
    Someone at - it PSAAPE A100 running with 4 GB on board?
    Does anyone know if an update of the BIOS can do the PSAAPE A100 accept 4 GB?

    Hello

    As far as I know, the Satellite Pro A100 was equipped with Intel 943GML Express chipset.
    This chipset supports the same specifications as the chipset Intel 940 GML and chipset theis max 2 GB of RAM.

    http://www.Intel.com/assets/PDF/datasheet/309219.PDF

    If mobile cannot be upgraded up to 4 GB of RAM to 2 GB only

  • Satellite Pro A100 PSAASE: How to get the FN keys work in Win XP

    Hey,.

    I bought the PSAASE Satellite Pro A100-00H004GR and killed Win Vista. Now it's Windows XP Pro!

    There is no Win XP Modem drivers on the Toshiba Page for this model, but I solved this problem by myself.
    But now my Fn keys/keyboard shortcut does not work and I have no idea what to do. I've tried Hotkey utility of the other models, but it does not work.

    No idea what to do now?

    Full Support of driver for each model would be great...

    Thank you
    Marc

    Hi I found the usefulness of Toshiba Satellite Pro A100 PSAA3 shortcut keys.
    It is not the same series, but try to install it. Maybe it will work!

    Don t forget to also install the common Modules

  • Satellite Pro A100: Trojan warning message during the windows BIOS update

    Trying to update my Bios through windows, my anti virus (f-secure) has a crush on decompressing the zip file a warning.

    The warning pointed out that the folder contained a Trojan horse and that he had been cleared to protect my computer.
    A warning from microsoft also said that access to these files had been blocked to protect your system.

    Is it possible that this update, downloaded from Toshiba really contain malware or could there be another reason for this event?

    Advice for help would be appreciated

    Post edited by: james7dean I have a satellite pro a100 o/s windows xp pro

    Hi james

    Don't you panic! You BIOS are not affected by Trojans, Malware or viruses.
    For the most part these BIOS files are not known for anti-virus applications and, consequently, anti virus software reports and notifies a virus.

    Before you start the update of the BIOS, you must disable automatic virus protection!

  • Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

    I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

    In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

    The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

    Any ideas?

    Hello

    You can download the drivers (and especially in your case for the sd-card-reader) here:

    http://PC-support.Toshiba-Europe.com/Vista/

    and here

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

    If you have any other questions, just ask. ;)

    Good bye

  • Satellite Pro A100 - unable to connect to the internet

    I'm unable to connect new Satellite Pro A100 to my youngest daughter to the internet.
    I have a cable modem Netgear DG834 router that works perfectly with my desktop pc and laptops other two of my daughter.
    I checked all the settings, but to no avail.

    Can anyone suggest anything that could restore the balance of my household!

    How have you tried to connect the laptop to the router?
    A you connect using a LAN cable?

    Are the firewall enabled?

    Please publish more details!

  • Satellite Pro A100 very slow, especially at the start

    Hi, I just bought a laptop Satellite Pro A100. In general, I'm very happy with it, but I find it very slow especially at startup. It may take more than 5 minutes to be completely started.

    Are there settings or settings that I can do to fix this?

    Hello

    I agree with the previous user of the forum. I often heard that Norton slows down the system quickly. Try to remove it and test it again.

  • Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

    Hello

    Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

    I have a Toshiba Satellite Pro L670.

    Even when the sound in Windows is turned off the laptop do a annoying sound.

    Thank you!

    Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

    Do you really want to work until the battery is completely discharged?

    Anyway, AFAIK this notification level BIOS cannot be disabled.
    Let's see if someone else is better informed than me.

  • Satellite Pro A100 PSAACE just cut off completely

    Everything was in working order last night. Today when I tried to use my laptop in the University, after awhile the laptop just cut off completely (not 'window stops', literally just cut off). At this point I noticed was the charge indicator not illuminated.

    So I checked that it was in the form correctly and everything was connected, who he was, but still no joy. I think it is maybe that my charger is dead on me.
    But I'm not positive, as when I remove the battery and reinsert it, the "power connection" comes on, even if the charge light.
    I could put my laptop then reinsert the battery, but it would be cut at random (probably because she have relatively no power left in it).

    Does anyone know if that means anything?
    When it is on, but not connected to a power supply when you move the battery icon... He thought it was still connected to a power source (if I had the power cord in or out of the laptop).

    Sorry if this seems obvious to some, just I would prefer not to buy a new charger to see that there is a problem with the socket on the back of my laptop, or a problem with the laptop battery etc. If you unplug your laptop, then remove and reinsert the battery, it lights the led "connection voltage?

    Hope to hear some reviews soon, that could help me cope with my laptop troubles.

    Thanks for reading,

    Dan

    Hello

    Simply put your laptop turns off automatically. Is this good?

    Well, for me it sounds a little like the laptop stopped automatically to prevent material damage due to a temperature high.
    Perhaps this was caused due to overheating.

    This can occurs if the modules of cooling don t work properly and can not cool with a maximum return. Generally, this is related to dust and debris blocking the cooling fans.

    This happened to me too many times there... I cleaned the cooling fan using a jet of compressed air and it helped.

    Maybe you should check this too...

    Welcome them

  • Satellite Pro A100 (PSAAPE) - download display driver

    Hey I uninstalled my drivers nVidia by accident. I thought that my laptop has not had a nVidia card, so I uninstalled them. Apparently he needs them. I went to the nVidia site and using this new beta Graphics driver scanner he determined I needed a nVidia GeForce Go driver but he was unable to provide. I searched sites in support for nVidia and Toshiba furiously for the last hour, but I came up dry.

    Could someone please find a download of this driver? I can't find it anywhere I'd really appreciate what I can't even watch a youtube video on the laptop now as display drivers have disappeared. I have no backup or shadow copy because I only have 20GBs of disk space and I need to keep. It is now I can roll back now.

    Please help someone.

    Hello

    Can you please send us the exact model number for laptop (A100-xxx), as well as the number of integer part (PSAAPE-xxx)?

    It seems that some models are delivered with the Intel graphics card. I just want to try to check the hardware components of your notebook.

  • Satellite Pro A100-622: Impossible to activate the card PCI-E BT

    Hello

    so, I have this laptop and it doesn't have the internal Bluetooth module or no connections to install one.
    So I bought a combo wifi/Bluetooth Broadcom pci-e card and WiFi part works fine but the Bluetooth part is not recognized,

    When you install the Bluetooth driver that I get "turn on Bluetooth", the fn + f8 does nothing so I was wondering if the pci-e connector is limited in the connections of the pins or there may be another question.

    Is there any software for Toshiba to throw the switch on the pci-e card?

    What is the exact brand and model of your handset device name?

    I guess the part Bluetooth is also a USB device as any device Bluetooth standard of our days.
    Nevertheless, the ID of the material seems to be unknown to the Bluetooth stack.
    So you could check the VID/PID string in your Bluetooth device device manager and
    Add it to the file 'tosrfusb.inf '. This file is used by Toshiba Bluetooth stack to identify the
    Bluetooth hardware. Maybe a new hardware detection will work now.

  • Satellite Pro M70: Noise with laptop OFF If power connected

    Hello

    I have the following problem with my new Satellite Pro M70.
    A strange volume low hissing sound that happens when the power is connected to the laptop.
    This noise occurs even with the laptop TURNED off when the power is connected.

    This sound can be heard in a noisy room, but is quite annoying when you work in a completely quiet room.

    Anyone else have the same problem?

    Hi Geo

    I presume that this adapter produce this noise. Am I wrong? Can you please locate the source of noise just?

Maybe you are looking for

  • My "All messages" folder disappeared. How can I get that back?

    My e-mail service provider, wave broadband, reconfigured recently their messaging system. Before the reconfiguration, I had a folder "All messages" in Thunderbird. He's gone. Hoe do I retrieve it?

  • Pilot Bluetooth HP Pavilion g6-2313ax 64-bit Windows 8

    I've been looking and trying all the messages online valid and functional drivers for Bluetooth. All the drivers that I've tried so far to give an error that there is no ro deted material may be removed. Please suggest me a way to make the bluetooth

  • Pavilion dv6: password administrator or power on password

    Hello! Our problem is not a new: none of us do not seem to know the password to our Pavilion dv6 (has not been used for a while). The complete model identifier is dv6-13554dx. I've seen other posts on this same topic. In our case, after entering a bl

  • Windows Explorer does not open

    Windows Explorer does not open when I go into My Documents it tell me that Windows Explorer has encountered a problem and needs to close.  When I go to the report and do not understand but the basics are "error 0xc0000005" and "hpswp_bho.dll" also I

  • Automatic maintenance is always delayed

    I have Windows 8 and everything was smooth until a few days or weeks. Now, Action Center is always displayed the error message: "The automatic Maintenance has been delayed" and he tells me to run either run manually or it will be executed automatical