Satellite Pro A100 stop correctly

Similar Questions

• Satellite Pro A100 - it does not recognize 4 GB of RAM

  Hello
  today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.

  After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)

  Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.

  (The processor supports 64-bit (core2duo t5500))

  concerning
  Kai

  Hello

  What Satellite Pro A100 you have exactly?
  As far as I know that some models can only be upgraded to 2 GB of RAM.

  It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
  I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?

  Welcome them

• Satellite Pro A100-02Y (PSAAPE): Need XP drivers for LAN

  Having recently bought a Toshiba Satellite Pro A100-02Y (PSAAPE) it came with Vista which I removed and placed a copy of XP pre-installed.

  I downloaded and installed all the drivers for XP but have Ethernet conflicts and mass storage controller and can't seem to find the drivers to correct this.

  Can anyone help please.

  Thanks in advance
  Poolfan

  Hello

  I Don t know what your problem is, which is not a real-time onboard support where are sitting 10 technicians from toshiba and waiting for
  be asked. We are normal people, where we're helping another.

  So, your comment was helpful, NOT! ;)

  And now about your problem:

  A mass storage controller is usually a RAID controller or something else and the word ether-'net' is self explainable... :)

  Try it here, I found the drivers for my computer to my Vista / XP-performance @ home. : O
  (It s the Canadian toshiba site)

  http://209.167.114.38/support/download/ln_byModel.asp

  Hope you have a chance and find something.

  Welcome them

• The second monitor connected to the Satellite Pro A100 "disconnect" himself

  Hello

  I use my laptop - Satellite Pro A100 (PSAACE) - with a second monitor with no problems until I did an upgrade to Windows Vista. After installation, the second monitor starts to show problems, i.e. that works intermittedly. Every 5 seconds or so the monitor "unplug" itelf and caps again. I hear the (UN) plug sound when she did this and the two displays flickers during this period.

  Can someone suggest a solution to this problem?

  Concerning

  I put t know what can be the problem but it sounds like the connection problem. Make sure that the monitor is connected correctly. Also try to test it with another external monitor. Is perhaps the cable or connector defective.

• Program to close or crash on Satellite Pro A100

  HAVE THE SATELLITE PRO A100, WHICH I USE FOR MUSIC. I INSTALLED PCDJ AND PROGRAM FROM TIME TO TIME STOP, CRASHES WITHOUT REASON.

  I FOLLOWED THE INSTRUCTIONS TO INSTALL THE PROGRAM, BUT IT CONTINUES TO SE WHICH IS VERY ANNOYING IF I DO A DJ SET AT THE PUB OR CLUB.

  HE DON'T Y HAS NO GROUNDS TO THAT HE CAN STOP AFTER 1 HOUR OR 4 H. CAN SOMEONE AS HELP I HAVE FRIENDS WHO USE IT ON TOSHIBA LAPTOP WITH NO PROBLEMS... PS IT'S NOT PORTABLE THAT BLOCKS ANY PROGRAM...

  Hi AL Karaoke ;)

  For me it s a clear case. Programs crashed due to high temperature.

  > I AM DOING A DJ SET AT THE PUB OR CLUB.

  I suppose that the temperature of the environment is a little higher in the pub or club. In addition, I think that the laptop can not cool properly due to the circulation of air.
  I m sure that the laptop is running properly without any crashes if you are going to use it as a common user. Do not forget that there is enough free space around the laptop for a circulation and cooling properly

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Battery for Toshiba Satellite Pro A100 M50

  The battery in the laptop model was PA3399U-2BAS. A vendor has sent a substitute - his number is PA3399U-1BRS. He says he has 95% of its capacity, but when the power cord has been removed from the laptop is dead and will not re-start without plugging the cord back in.

  This battery would have an acceptable replacement? The laptop is running on its battery at reduced capacity and needs to be replaced.

  Any thoughts?

  Just for your info:
  Toshiba Satellite Pro A100 specifications you can use batteries follow
  PA3399U-2BRS (6cell),
  PA3399U-2BAS (6cell),
  PA3478U-1BRS (9cell),
  PA3478U-1BAS (9cell),
  PA3400U-1BRS (12cell),
  PA3400U-1BAS (12cell).

  Start your laptop with AC supply and battery, put the battery and if the battery is correctly recognized remove power supply.
  The same thing happens again?

• Satellite Pro A100: Mat * a UJ - 841 s DVD Multi drive does not

  Hello

  I have a Satellite Pro A100 with a carpet * a UJ - 841 s DVD Multi Drive.

  Recently, I decided that as my laptop is running slowly I wanted to format and reinstall XP Pro, I used a standard version of OEM XP Pro (not seller specfic) and he went on the formatting and the reconstruction of my laptop.

  Fortunately, I used Acronis True Image to backup my laptop before I did that my above mentioned dvd player is so more to bury properly (all the drivers and the necessary software has been installed). Before I formatted the laptop I could burn on + and - DVD (r, rw and ram) now that the laptop has been rebuilt, I can only burn to dvd-r/rw/ram.

  I restored from my laptop to the picture created by Acronis and can use the drive normally again to burn + and - DVD.

  Does anyone know why this would have stopped working in the new installation of Windows? I also tried to create a virtual machine using the same xp disc but it always gives me the problem of dvd player.

  Thank you

  Rich

  Hello rich

  Have you noticed the same problem after using Toshiba designed recovery DVDs?

• Satellite Pro A100 - flashing light battery and no start

  Hello

  I was sitting watching a video with my daughter yesterday when five minutes in my Satellite Pro A100 suddenly stopped working - cut out completely and not be reactivated. When I tried to restart the orange lit battery eleven short blinks blinked, and nothing else has happened. The battery has been low for some time, so we always run the AC adapter. The adapter is currently connected, but there is no blue light charge as I expect.

  With the battery removed do not get the flashes orange. With the battery and power adapter, I get the flashes orange.

  I was wondering if the AC adapter was missing, and we do not have a "low battery" warning because we were watching a video. That would explain the lack of charge indicator. When we get the flashes orange, we get this from the small amount of residual charge of the battery.

  Can anyone back this idea up - or anyone who can interpret the error code?

  Thank you

  Keith

  Hey Buddy,

  This means that you are able to start your computer or battery or AC/DC adapter only, good point?

  Well, theoretically it might be possible that AC/DC adapter is defective.
  When you try to start your laptop, nothing happens, right?

  In the best case, you know a friend who has the same AC/DC adapter, so you can test if the AC adapter is defective or not. Otherwise a professional diagnosis of an ASP would be necessary.

• Coke spilled on Satellite Pro A100 - black screen & flashing light

  Hello

  I have a Toshiba laptop Satellite Pro A100, and this morning my daughter spilled coke top.
  It was not much and it only seems to be on the top of the screen (as the laptop was closed)

  However it was a bit on the keyboard and when I opened it it seemed to be a crackling sound from speakers?
  I turned off and unplugged the power outlet and it was built next to the radiator for the last 4 hours,
  I tried it again now and it started, there were still crackling and then the screen went black, but the 'on' will Flash blue, the capslock flashes as are the other two on the keyboard.

  Is it buggered or is there anything i can do to fix it?

  Any help would be apprciated.

  Hello

  My laptop couldn't t start because my girlfriend accidentally spilled water on the keyboard.
  The laptop turns off and I was not in a position of power upward again.
  Whenever LED books went ON and after a few seconds the laptop stop again.

  I thought that the motherboard was dead, but I tried to replace the memory modules first and bingo!
  One of the modules has been defective.

  I replaced it and the laptop turned on properly.

  Welcome them

• Satellite Pro A100 - blue screen keeps coming back

  I have a Satellite Pro A100 (psaase) and a blue screen appears some time it says image kernel memory and the only way out is to restart the laptop.
  How can I fix? Can someone tell me what's wrong with it and how to fix it?

  Thank you

  There are hundreds of causes BSOD. What is the BSOD STOP code?

  0x000000?

• Satellite Pro A100 PSAASE: error Power Saver and LAN? After downgrade to XP

  Hello
  I have a toshiba satellite pro A100-psaase!
  I could not find this model on the toshiba site, so I chose the A100-psaas software.

  The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.

  I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.

  My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.

  The funny thing is that I have internet and all.
  I can't find a solution to these two problems
  Thanks again

  Hello

  You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
  I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
  Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.

  The LAN drivers are also published on the page! There are 2 different versions. Try them both!
  The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!

  Good day

• Need Product Code for (Satellite Pro A100-722) AC adapter

  I am looking for the product number for the adapter from the model below so that I can buy the correct replacement AC adapter.
  Satellite Pro A100-722
  Part number: PSAAPE-00D006EN

  Help would be great.

  This adapter must be compatible:
  * PA2521U/E-2ACA * 15V - 6A - 90W

  I put t know where you come, but you can order this feature of the ASP in your country!

  See you soon

• Satellite Pro A100 - how to get the Wlan connection works

  Help!

  I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
  My son has a laptop and gets a good connection anywhere in the House and even outside.

  He thinks I have a dodgy wireless adapter, this could be the problem?
  Can I fix it myself?

  Maybe download a new driver?
  Any suggestions would be much apreciated.

  TOSHIBA SATELLITE PRO A100

  Hello

  Your ad is not really useful.
  I mean that there is no detail about your problem
  You should first check if the laptop supports the wireless network card.
  This can be done in the Device Manager.

  Usually the WLan card must appear in Manager devices-> network adapters.
  If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).

  But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.

  Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)

• Satellite Pro A100 - PXE message appears at startup

  I have a problem and I really really really could use some help, its been listen to me for the last two days ive trawled through countless amounts of forums and web pages without success then for a last ditch attempt until I throw it out the window (figuratively) I thought I'd come here for help!

  It's a Toshiba Satellite Pro A100 model No. ' PSAAPE-00Q00KEN

  initially when I started the computer this error message came

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Operating system not found

  now, I managed to stop the PXE errors by disabling the Lan built into the BIOS option

  I have check and made sure it is not a disk in the DVD player to the left it doesn't have a floppy drive so it isn't that

  BIOS for some reason usually see the hard drive is a seagate 80 GB HDD Sata, but I know that its fine because it works but in my Dell laptop.
  and my Dell laptop hard drive is not seen in the Toshiba.

  Now that I read all about flashing the BIOS, but I can't because the only download I get Toshiba is one that runs when windows is running (if I can't get it to boot, how do I Flash the bios)?

  I also tried thing BIOS resseting to short-circuit the c88 under the wireless network card, but that didn't work or the other!

  Now is there anything else I can try or do give up and throw it out the window?

  Thanks in advance

  Terrakan

  Hello!

  It's really strange, but it looks like your HARD drive to the motherboard controller is the reason for this because you said that the HARD drive works in another phone.

  Can you please try another HARD drive in this notebook? If another HARD drive works the old HDD is definitely faulty and if not, I think that the motherboard must be replaced.
  So, you can determine what is exactly the problem.
  In addition, I think that there is nothing more you can do at the moment.

  Good bye