Satellite Pro A100: Why can not connect Internet with the net card

Similar Questions

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite Pro U400-13O: can not enter TrueSuite without the fingerprint

  After having downgraded to WinXP
  I deferred to configure my fingerprints.

  On one occasion, I agreed to store a password in TrueSuite.
  Now I can't enter TrueSuite more because the software waits to read my fingerprints for the purpose of verification of the user - it is not yet registered.

  There is no possibility to enter my password user or such.

  What can I do - just uninstall/reinstall the program?

  Can I reinstall the program from the CD to downgrade, or would it reinstall the system?

  Hello

  Usually, you can also use the passwords stored in the logo of the OS.
  If you don t want to use fingerprint authentication, but prefer to use the press focused on the keyboard system BACK SPACE key when the screen of fingerprint authentication system startup is displayed. This allows to switch the password entry to the basic one keyboard screen.

  Please note that you can find all information and details in the chapter 4 user manual

• Satellite Pro A100 - it does not recognize 4 GB of RAM

  Hello
  today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.

  After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)

  Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.

  (The processor supports 64-bit (core2duo t5500))

  concerning
  Kai

  Hello

  What Satellite Pro A100 you have exactly?
  As far as I know that some models can only be upgraded to 2 GB of RAM.

  It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
  I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?

  Welcome them

• Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

  Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

  Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite Pro A100-828 refuses to connect to the internet with modem MDA Vario 2

  I have an Equium A60 which I use regularly as a modem for mobile internet access. Still, it connects to my MDA VARIO 2 (HTC Tytn) and gives quick access.
  However I just bought a Satellite pro a100-828 who, for some reason, refuses to connect to the internet through this phone.

  T-mobile want nothing to do with the problem and that it is a conflict between the phone and the bluetooth stack Toshiba. The phone has always look like that is going to connect and then to computer recording connected to the screen network switches the modem feature phone.

  As you can guess I'm sitting at the old equium typing this so if anyone can shed some light on this I would be very happy?

  I tried to uninstall the bluetooth stack.

  The fact that your old Equium was connected via BT to this modem?
  Perhaps a Bluetooth stack of new version of battery BT facility allows or you can try to use the same version of BT stack that is installed on the old notebook

• Satellite Pro A100 - where can I find the driver for ethernet controller?

  I recently changed my OS from Vista to XP and I'm not able to find a driver for the ethernet controller in my Satellite Pro A100 PSAAPE.

  Anyone know where I can get this driver from?

  Thank you!

  > I had already checked and cannot see the pilot
  I don't believe that. I checked the Toshiba download page, and you can see two LAN drivers for your model laptop.
  Install the latest version 9.2.24 and I think everything will be OK.

• Satellite Pro A100: Bluetooth does not work

  bought a toshiba Satellite Pro A100... came with a built in blue tooth... al worked well... until 4moths to fight back my computer had to be repair he was expelled to the toshiba returned however restarted by bluetooth/service application are not on the taskbar.

  I am looking for the computer n found in system folders aside my blue tooth stack but how to make the blue tooth to work.

  Make sure the WiFi switch is on.
  Press + and select the bluetooth antenna.

  Check if your Bluetooth module has been correctly detected:
  -Open the DeviceManager (start-> Run-> "devmgmt.msc").
  -Open the section "system devices".
  -A "Bluetooth ACPI" device should be available.
  (The system has detected the BT module if this is the case).

  Install the battery last Bluetooth (= drivers + Bluetooth management software) v5.10.12T.
  You can download it here:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/download.php

• Satellite PRO A100 - failure of wireless connectivity

  Hello world

  I have a problem to connect to my router wireless from a Satellite PRO A100 XP pro with integrated Atheros Wlan. Any suggestions on how to proceed would be welcome.

  The laptop can see the wireless network and says it is connected, if I ask it to connect, but fails to get an IP by DHCP - leaving a 169. 254.x.y address and "limited connectivity or no network. I tried the button fix but to no avail. If I used a static IP address on the same subnet as the router and gateway ping request times out. Successful ping 127.0.0.1 and the IP address of the host.

  Another PC can connect to the wireless router.
  The firewall on the laptop is disabled.
  The wired LAN works well.
  I tried to connect to two different (the two Linksys) wireless routers without success.
  I used different encryption configurations, including none.

  Any thoughts on how to proceed?

  Have you tried to reboot your router and check the WLAN connectivity again?

• Satellite Pro A100-080 does not start - stays dark after 3 beeps

  Hello
  After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
  When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
  No other useful help, as the screen remains dark.

  We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
  a defect of memory.

  I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
  Does anyone have an idea what could be the problem?

  Thx for a short help.

  Hello

  Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

  On the Toshiba site, you will find a list of aspic:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Re: Satellite Pro A100 PSAAPE - can't get to POST 4 GB on board

  Tried to upgrade RAM from 1 GB to 4 GB.

  I use the pair of Kingston KVR533D2S4 / 2G (2 Gb PC2 - 4200 CL4 200 - Pin SODIMM Modules).

  However, I can't the A100-PSAAPE post with 4 GB on board.

  It works well with a single module (in each slot) and pointed out 2 GB of RAM.

  TOSHIBA knowledge base makes the following reference:

  * Requirements for the use of 4 GB of main memory *.
  + The BIOS must support the memory remapping feature. +
  + The memory remapping feature allows for the segment of system memory which was already crushed by +.
  + PCI configuration space to be remapped above the 4 GB address line. +
  + The newer BIOS versions support this feature. +

  * _My Questions_ *.
  Someone at - it PSAAPE A100 running with 4 GB on board?
  Does anyone know if an update of the BIOS can do the PSAAPE A100 accept 4 GB?

  Hello

  As far as I know, the Satellite Pro A100 was equipped with Intel 943GML Express chipset.
  This chipset supports the same specifications as the chipset Intel 940 GML and chipset theis max 2 GB of RAM.

  http://www.Intel.com/assets/PDF/datasheet/309219.PDF

  If mobile cannot be upgraded up to 4 GB of RAM to 2 GB only

• Password just changed an hour ago. I can not connect. Error: "the user profile Service has no logon. Unable to load the user profile.

  Original title: just changed password an hour ago. I can not connect.

  Password just changed an hour ago. I can not connect. I don't have a password reset disk. When I type the password and press ENTER, the next page says ' THE SERVICE PROFILE has NO logon USER. USER PROFILE CANNOT BE LOADED. »

  Hello
   
   
  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
  
  Try to connect to your computer from another user account and follow the steps listed in the article below.
  Check out the following link and follow the steps to solve the problem:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215
   
  Note: If you do not have any other user account the computer checks to see if you can boot to the desktop insafe mode , and then perform the steps listed.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie