Satellite Pro A110-178 don't dΘmarre

Similar Questions

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Satellite Pro A110 PSAB1C: can't choose certain resolution external display

  I have Pro A110 PSAB1C-GM60XE with Intel Graphics Media Accelerator (Controller graphic memory integrated Intel 945GM Chipset) running Windows 7 Enterprise.
  Graphics driver is up to date.

  We got 20 "external monitor wide screen HD.
  When it is used as external screen it allows only up to 1280 x 1024. The display is nice streched out.

  I tried the monitor of one laptop another the same graphics card (integrated memory graphics controller Intel 945GM Chipset), also Windows 7 Enterprise.
  The same version of the graphics driver. This laptop has resolution up to 1600 x 900.

  Any ideas on what needs to be done on A110 Pro to support the resolution 1600 x 900 for the external monitor?

  Note: I've tried DTD Calculator but still the same http://software.intel.com/en-us/forums/showthread.php?t=56423.

  Hello

  Available external display resolution depends on the graphics chip and the driver graphics card.
  If the graphics chip or the graphics driver doesn t card supports the preferred external resolution, you will not be able to choose.

  It seems that the graphics chip will support this resolution.
  In such cases, it s a driver problem.

  Therefore, it would be advisable to download and install the driver from the Intel page.
  I had the similar problem in the past. The driver of Toshiba page didn t supports my favorite external resolution. I got the driver from Intel page and was able to chose him.

• Satellite Pro A110 - in BIOS exclamation Point in front of the HARD drive

  Satellite A110 Pro PSAB1C-GM80XE

  Question is this. SATA CONTROLLER TOAST the laptop?

  Story.

  It seems as if the laptop hard drive has failed.
  Prior to the laptop, it would get BSOD.
  It would, however, go back to windows XP.

  After that, sometimes it wouldn't restart, he would try to boot from lan as if there is no hard drives.
  I check the bios.

  There is a! in front of the model of the drive. I can't change it, reset default does not change.
  No update of the bios was already made.
  Page drivers laptop says I have to install the update to the bios from windows xp... I can't do it of course.

  I bought a new hard drive for the laptop. WD Scorpio Blue (pretty standard) 160Gig

  The laptop recognize model to drive hard in the bios, but once again with the exclamation point in front of the name of the template.

  BIOS can see, but nothing else. No windows CD is able to watch the HD.

  Once again, it is the sata controller or can someone point me to an update of the bios I can do with a USB key.
  Should I just throw the laptop in the trash? I expect to give it a new life with a new hard drive and own bones.

  Hello

  What is the BSOD STOP Code?

  If 0x0000007B, it means that Windows cannot find a SATA driver for the SATA controller. To solve this BSOD, set the SATA Mode in the BIOS in "COMPATIBILITY" mode, or use a USB floppy with the SATA driver on this subject during the installation of Windows. Press F6 when you are prompted to install a 3rd party storage driver.

  Or otherwise, to use the original Toshiba Recovery disk to install Windows.

  I do not mean the exclamation point in the BIOS that the HARD drive is faulty, it means that the HARD drive has the highest priority boot on my laptop.

• Satellite U300-11 q: don't dΘmarre without the battery

  Hi all,

  I bought the model Satellite U300-11 q about a month ago, and I have the following problem: if I have it on current alternative, and I do not have the battery, it is dΘmarre! In fact, it loads the BIOS and just before it starts to load Windows (Vista) it shuts down, as if someone unplug it from the power supply. The strange thing is that after all attempts of 5-6 in the line, it starts, and it turns that I use.

  Any idea on what is happening?

  Thanks in advance!

  The laptop must begin properly with battery and without the battery.
  There should be no problem!

  If the laptop does not start successfully without the battery, then there's something wrong. In this case, you will need to contact the ASP in your country for a control.
  The guarantee must be valid if the laptop is only one month. So everything should be done for free!

• Cannot find drivers for Satellite Pro A110 PSAB1C-ML40XC

  When I was looking in the toshiba site does not appear the Satellite A110 Pro PSAB1C-ML40XC model, for this reason that I have not found the drivers for this model.
  Where can I download the drivers for this model of toshiba

  I put t know what Toshiba driver page you are looking for, but this seems to be a Canadian series of Toshiba and you should take a look on Toshiba Canada website:
  http://support.Toshiba.ca/support/?LG=en&from=65

  Here, you should find this laptop model

• Satellite Pro A110 blocking (he must press power) when copying large files

  I have two users the two ProA110 PSAB1C-GM60XE that hangs just at the copy files or randomly just by using the network connection.

  The network card is a Realtek RTL8139/810 x Family Fast Ethernet NIC

  I updated the driver to the latest version 5.708.1030.2008

  I also reset the TCP/IP Protocol:
  c:\netsh int ip reset c:\resetlog.txt

  Disable "Allow the computer to turn off this device to save power" on the properties of the NETWORK adapter

  I tried to re - install XP and the same problem.

  Shows the Windows event log. "Your computer failed to renew its address from the network (from the DHCP server) for the network card with network 0016D address 4258701." The following error occurred:

  The semaphore timeout period has expired. . "Your computer will continue to try and obtain an address on its own from the server network address (DHCP) '. Nothing came on Internet search that help.

  All who have similar problems and how it was resolved very useful.

  Thank you!

  Hmm, I searched a bit on MS pages and found this:
  em http://www.Microsoft.com/technet/support/EE/Transform.aspx?ProdName=Windows%20Operating%20Syst & ProdVer = 5.2 & EvtID = 1003 & EvtSrc = DHCP & LCID = 1033

  The reasons for this question might be:
  The DHCP server is down or does not.
  The DHCP relay does not work correctly.
  The network is down.
  The firewall on your computer blocks on broadcast network traffic.
  Network interface card or your computer driver does not work correctly.

  Microsoft offers different solutions, workaround and solution proposals.
  Please visit the mentioned MS.

  Good luck

• Satellite Pro A200 - Enable to launch

  Hello!

  My Toshiba Satellite Pro A200-1KW don't want to launch fully! Last night stops suddenly (I got it since 2007 and I have no problem). I wanted to restart immediately, then it gets stuck on a black screen with the grey wire flashing dashboard on the top left corner.
  I have windows XP.

  Just before he suddenly off, JAVA JRE image appears on the screen, and a few seconds later it turns off. Restored the system with the CD provided by Toshiba, with the purchase, but nothing!

  Please help me!
  Nicolas

  Hey,.

  > Restored the system with the CD provided by Toshiba, with the purchase, but nothing!
  Does that mean exactly?
  You have the same problem as previously (black screen with blinking cursor) after the installation of recovery?

  The fact is if after the installation of recovery the computer doesn't work properly, it s hardware malfunction and you need professional assistance from an authorized service provider.
  The Toshiba recovery disc can restore the original settings of the box they are pre-tested by Toshiba so it s no software issue

• Satellite A110-178 cannot run the Da Vini Code game

  My satellite A110-178 cannot launch the game "The Da Vini Code". following error occurs:

  Encountered exception! You want more information (will take several seconds to determine)?

  When I choose 'Yes', the following lines appear:

  (Slayer) Address of exception

  [no info game crash]

  IMAGE HELP STACK:
  TArchive::operator = + A9D22

  MAP FILE STALKWALK:

  All I can do is press 'OK '.
  the program stops, and that's the end of it.
  I don't know what that means, is there a problem with my hard - or software?

  If anyone can help me and translate the language of code of my computers, I'll be gratefull for this,
  because this is not a cheap game,

  Thanks in advance,

  Davina

  Post edited by: Davina Deleye

  I recommend you to check some forums on this game. I found one under http://www.isohunt.com/forum/viewtopic.php?p=126110

  Maybe you can find answer here. Read it carefully.

• Satellite A110-178 - burn audio CDs including CD-text

  Hello

  I have a Toshiba Satellite A110-178. I would like to create an audio CD (.wav files) including cd-text (Yes, data such as artist, album, etc.).

  I tried to add cd-text using several different programs (Nero, to Acoustica CD burner, etc), but when I burn the CD, cd-text is not available.

  Now, I have learned that your cd burner must also be able to burn cd-text. apparently, not all cd burners have this ability.
  Do you know if the cd in my Toshiba burner is capable of burning these data?

  Thanks & best regards,
  Oliver

  Hello

  As far as I know it of not possible to include the CD-text on Audio CD. That s me don't know.
  On MP3 discs - it possible to s, s no problem.

  In any case, to check this function you mean, it is important to know the exact model of the DVD/CD player. You can check in the Device Manager. Then you can ask Google for detailed specifications. :)

• Satellite Pro S750-008 diskpart ' all don't own "is suspended, no HARD disk activity

  I'm following the instructions at sevenforums to erase my entire HD before sending my laptop somewhere.
  In particular, I publish the diskpart command "prompt at startup.

  I only have a single HD on the laptop, disk 0, and I chose it before "clean."
  The page above says that it takes about 1 hour for 300GB and I have 300 GB, but it is not yet done after 2 hours. However, I also note that the HD LED shows not all activity.

  The hung process due to the fact I clean the HD even I am operating from?
  Is it advisable to either stop the machine, and then carry the HD on in an external enclosure so I can use another computer to look/see what has been deleted?
  Will it hurt the HD to interrupt such a procedure (possibly hung) deletion?

  I'm running Windows 7 Pro 64 bit on a Toshiba Satellite Pro S750-008 (aka PSSERC-00800)

  Hello

  Why you n t use a DVD recovery or a floppy from Win 7 to format the HARD drive?
  Boot from the Toshiba recovery disc. The recovery disc formats the HARD drive and partitions and redefines the laptop to factory settings.

  You can also start Win 7 disc (or other Microsoft) and can format the HDD too.

• Satellite A110-178 - updated from XP to Windows 7

  Hello

  I have a Satellite A110-178 and I would improve my OS from Windows XP to Windows 7.
  I've never installed new drivers or a new BIOS on my laptop, so I guess that many of them are outdated.

  What's the smartest thing?
  Update drivers and/or BIOS before upgrading to Windows 7? Or install Windows 7 and install the necessary drivers later?

  In the event that the BIOS should be updated: as there is no BIOS update available for Windows 7, what version of BIOS is the right one to pick?

  Thanks for the info!

  Kind regards
  Oliver

  Hi Oliver,.

  First of all an upgrade from Windows XP to Windows 7 isn't possible of t. This means you need to do a new clean install and after that, you can install all drivers.

  An upgrade to Windows 7 is possible in Vista but not XP.

  The update of the BIOS is normally not necessary. This update should be carried out only if it of really necessary.

• Satellite Pro - Skype tells me that I don't have a webcam

  I have a Satellite Pro and just signed up for Skype. Skype tells me that I don't have a webcam, but he joined is not it?

  What I have to do soemthing to activate it?

  Hi kkabg,

  And what model of laptop you have exactly?

  Please report the exact model number you can find on the lower side of the unit.

• Need drivers for Satellite A110-178

  I need dirvers for Satellite A110 - 178
  (for ethernet, graphics card, driver sound and pci controller).

  I not found in
  https://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

  The link to the page is correct.
  The Toshiba UE driver page provides the drivers FRO Satellite A110 series.

  Satellite A110-178 is part of the PSAB0E series and the drivers are located in the area of the Archive.
  You have to choose: type of product? Archives

• Satellite Pro P100-327 no visual don't screen the bios startup

  Hi guys,.

  I have a problem that I think has been there since I upgraded my Satellite Pro P100-327 XP to vista Business.
  At the start, I have more no Visual on the screen until I see the windows logo. Computer works fine otherwise.

  Now a year and a half later I want to load Windows 7 and I can't see the bios screen. F12, F2 or esc. do not help me even if the computer does not stall but I do not see on the screen. I have the latest version of the bios and the nvidia drivers as far as I know.

  The only thing that I did not understand everything is the 'value added package' I think it's the small "HW" program, I downloaded the latest version and clicked on load HW in the control panel. Windows has asked if I wanted to go forward and I saw nothing else after that.

  thaks a lot if anyone can help

  Brian

  Hello

  For me, this looks like a problem of monitor settings but I don't know m.
  You are using an external monitor or have you changed the monitoring (from simple to double mode) mode?

  In your case, I could connect an external monitor and see what happens. Have you noticed the same problem on external monitor?

  In the worst case, there is something wrong with the internal display, but this should be verified by a technician of the laptop.