Satellite Pro A120: How can I identify the disk - bar codes?

Similar Questions

• Satellite Pro A120: How do I remove the CD/DVD drive

  I have 2 main problems and doesn't seem to completely open the case.
  Does anyone know how to remove the dvd - rom?

  But my mainproblem is swith power Ribbon (blue) has come off the motherboard. But as I can't open completely the case im with tweezers for trying to recconect.

  Does not seem to want to go.
  Is there a clip into the connector on the motherboard or is it just push in? A picture or a diagram would be helpful.

  Any help would be appreciated.

  Thank you

  One question; Why are you doing this?
  I mean why you want to open the notebook?
  Always it is that Satellite Pro A120 is not an old notebook and I presume that the guarantee is valid.
  If you remove the lid of the laptop, you will lose the warranty!

  The removal of CD/DVD is very easy.
  Usually, it is fixed with a screw located at the bottom of the unit. You have to remove first, and then he should be able to take off from the STRANGE.

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Re: Satellite Pro L300 - how can I reset the BIOS password?

  I put the password on the BIOS and electric start and I forgot the password.
  How can I reset the password?

  I have a Toshiba Satellite Pro L300.

  You must bring the laptop to an authorized service center to remove the password.

  Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

• Satellite Pro A10 - How can I change the start property?

  Hello

  How can I chance the A10 coastal boot?
  With ESC, I can access the BIOS, but I can't chance anything except the time.

  Thank you
  Tobias

  Hello!

  I think you should check the BIOS again because as far as I know, there you can change the boot priority.
  In addition, you should find more options in the BIOS as only the Date and time.

  Check it!

  Good bye

• Satellite Pro A40: How can I change the video ram

  Hi I have an A40 my Ram video machine is set to 16 MB maximum is 64 MB
  How can I change my 64 MB
  I tried the bios theres nothing in there that will change, I have the latest version of the bios of the machine V1.50

  what someone of nowhere leaving to do this please

  Jay

  Hello

  As much as I know the of A40 Satellite Pro supports the Intel 852GME shared memory graphic card.
  S control Intel cards automatically memory allocation.

  This means that if the graphic card must more 16 MB of memory, the graphics driver will share the part of main memory!
  The whole process runs automatically and you do not need to change anything!

• Satellite Pro L20 - How can I change the optical drive?

  I want to change the optical drive in a satellite pro L20 but I'm having trouble finding instructions on how to remove it. Can anyone help?

  The CURIOUS reader is fixed with a screw at the bottom of the unit. Then, turn the computer over and remove one screw an optical disk drive.
  The second screw is hidden under the keyboard. That's why this screw must be removed also. And then disconnect you should be able to pull-out of the optical drive.

  But note; If you have no experience of these things, ask a technician for laptop computer to help him.

  Good luck

• Satellite Pro L - how can I update the driver chipset?

  I need to update the graphics driver for my 965 chipset. I downloaded what I thought was a driver out of date on the Toshiba site, but when I went to install, I get an error message indicating that my system does not meet the minimum requirements. If I try to install a driver from Intel site, it tells me to get the driver of my manufacturer...

  All tips (dumbed down please) Nice.

  Thank you

  Hello

  Can you please tell us what Satellite Pro laptop computer you have exactly?

  Normally before update you a driver, you must uninstall the old version first. Reboot the laptop, then I recommend that you install the most recent version.

  By the way: I had a similar that I deliver couldn t install new Intel driver. I solved the problem if I install the manual of the driver through the Device Manager and of the Advanced installation routine. I chose the directory driver myself and it worked! :)

• Satellite Pro A300 - How can I change the size of the partition?

  Hello
  My Satellite Pro A300 came with 2 different partitions, and I would like to change the size of the partitions (the data partition is too small).

  Which would affect the recovery tools? Is there proposed formulas?

  Thanks in advance,

  Andres

  What operating system do you use on your laptop?
  If you use Vista, this document could be useful for you:
  http://195.182.196.33/KB0/TSB7101OB0006R01.htm

  This should normally does not affect the recovery of HARD drive but make sure to burn the disc of recovery if you didn t it yet.

  If you have the recovery disk, you are on the safe side.

• Satellite Pro L500 - How can I prevent the boxes menu popping up randomly

  How can I prevent boxes menu popping up randomly and the cursor randomly fault as well?

  It settles after a certain time, but can occur at any time.

  Hi mate

  What menu boxes do you mean exactly?
  What exactly happens with your laptop or OS?

  Please provide details.

• BIOS update failed on Satellite Pro A60 - how can I replace the bios chip?

  Hello, I'm in trouble of deeep.

  I tried to update my bios but something went wrong
  during the process and now the laptop does not start.
  (when I try to activate the satellite, nothing happens)

  I have to desolder the bios and replace it with a new?

  Is there an easy way to simply delete it?

  Please help me!
  Thank you

  Sorry but I want to just ask you a question: how far are you with laptop computer and technology of BIOS?

• Satellite Pro 440cdx - how can I change the brightness or contrast

  My screen is weak and hard to see objects on the screen, any advice will be more welcome.many thanks for any help.

  Hello

  The brightness of the display can be changed by pressing the FN or FN + F6, F7 key combination.
  The contrast could not be changed on the screens of laptops that it is set automatically.

  But if it of very difficult to see anything on the screen, then an FL inverter may default.
  The fl inverter is a small part that controls the brightness of the display.
  Maybe it s need to be replaced.

• Satellite Pro A120 - how to identify the sound card

  Hello

  don't know if you can help me on this one, I have more or less the same problem.
  Bit long-winded, but we broken rececently, very clever thieves, stole a number of point with my computer with disks of Toshiba bag. (LOL) the lap top was next to the bag on the desk, they left.

  Since then contracted a virus which means I had to completely format the hard drive and installed XP.

  No problem, but now I can not find the audio drivers right. Q. How can I identify the sound card on the top of the Tower?

  You n t know what sound chip has your laptop?
  On the Europe of Toshiba page you can find the drivers for this model of laptop.
  I can see that the Realtek sound card driver has been released and so I'm 100% sure that the sound chip was made by Realtek.

• Satellite Pro A300 - How can I turn on my webcam?

  Satellite Pro A300 - How can I turn on my webcam? Operating windows 7. The computer is clean.

  Hello

  The webcam can be used with programs like Skype communication where you can make a video call. Of course, there are other messengers or programs they use the webcam.

  But you must install the software/driver webcam that you can use. This software can be downloaded from the official website of Toshiba (Camera Assistant Software):
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers