Satellite Pro A120 - Jerky empty reading after installing new HARD drive

Just installed a new hard drive in my Satellite Pro A120. Made a full new install Vista, installed all the drivers but video playback is choppy/jerky. Even google earth is juddery. It didn't use to be like this with the original hard drive.

A I had a problem of driver somewhere? I think it's the 945 chipset.

Hey Buddy,

To be honest, it's really hard for us, users, to say what causes this problem and I think you should test more yourself

Anyway, you have reinstalled Windows using the Toshiba Recovery disk?
You should also check if all Windows updates are installed and if you have yellow exclamation points in Device Manager.
For any use of video and multimedia substance High Performance plan wrote BobRock_1.

Sorry, but I think that it s all we can say :(

Tags: Toshiba

Similar Questions

  • Bluetooth driver after installing new hard drive

    Hello:

    RE: HP Pavilion DV7 - 4270us Windows 7 64-bit

    Two weeks ago, I replaced the internal hard disk on the above referenced pc. I added slowly back the necessary drivers and software using a large HP Expert.

    (Note: I have create recovery discs when the pc was new, but for some reason, they would not install new hard disk.) This is the reason why I'm adding drivers and software available, one at a time.)

    3 questions please:

    (1) because my pc's bluetooth, I don't remember adding a bluetooth driver. How could I know?

    (2) Lightscribe software has been installed at the factory on my pc, but I have not just now. Is it possible to get that back?

    (3) reviewed the upgrade from Windows 7 to Windows 8.1, but was afraid that I wouldn't be able to find the drivers for my pc if I have upgraded. In addition, read on the forum, it seems to be quite a number of issues upgrading from Windows 7 to Windows 8. 1. What are your thoughts?

    Thank you for your help and suggestions.

    For the Bluetooth drivers:

    If you need drivers, follow these steps:
    1. in the run box, type devmgmt.msc.
    2 unknown devices would be listed as such and plotted with a yellow question mark.
    3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
    4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
    5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
    6. Please provide this number so we can offer you the appropriate driver.

    Here is the link to the lightscribe software:

    http://download.LightScribe.com/LS/LS_Update_1.18.27.10_.exe

    Regarding Windows 8.1:

    If you are running Windows 7, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

  • No input signal after installing new hard drive

    SUP guys, im need help, my hard drive on my computer has stopped working, I'd get an important flasher hits and it looks like it please insert a disk and when I did a diagnosis, I had hard drive errors I went and bought a new one.

    In order to take the old one out I had to remove the cables from the hard drive, the big white thing that plugs into the motherboard, the processor fan and cable.

    I put in new hard drive, put everything back as it should and when I boot it all im getting are no signal input on my screen, I have tried on 3 different screens and got the same thing.

    Here are some pictures of the inside of my computer:

    If you notice the VGA thing on the 2nd picture, should no more added to it? I mean in addition to plug the cable from the monitor, I have the impression that there should be something added to the back of it, I just noticed now, the computer and the screen worked perfectly before.

    It's a HP model number is a6655f, it came with vista, but after putting in the new HD, I intend to put windows 7, I have a copy of it.

    I guess with the new hard drive and I am I was right assuming that you have already installed windows 7

    Sounds like you need drivers for the drive, and sounds like a simple problem, download drivers and install I believe that when you install windows 7, it offers you the possibility of drivers installed.

    Oh and you could try to change SATA to IDE in the BIOS and see if that helps

  • After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

    After a computor crash and the new hard drive, my disk drive does not work in media center "video card or drivers are not compatible with media center.

    Probably a matter of resolution: you will need to install the specific video drivers XP laptop computer PC manufacturer's Web site.

    See you soon,.
    Jerry

  • Problems opening Captivate 7 for Mac after installing new hard drive

    Hello!

    My HDD recently crashed and I need to install a new hard drive (OS x El Capitan, version 10.11.13) on my mac. They re-installed Adobe Captivate (I use Adobe Captivate 7 for Mac), but now the software and files that I created using the software will not open. Initially, I received an error message stating that I had to install a new version of Java, but even after I did it, it will still not open. I click on the link in the finder and it bounces on the taskbar at the bottom for one second, then disappears. I tried to restart the computer, but it does not help.

    Can anyone help? I need it immediately for work!

    Thank you, Ashley

    I suspect that the reason is the operating system. Even the Captivate 8 was not compatible with El Capitan, I doubt that is the case with CP7. Only CP9 is compatible with El Capitan.

  • No sound after installing new hard drive

    I recently installed a new hard drive for windows XP and I installed all the updates of windows updates. I plugged in an Altec speaker system exactly as I did before, but I can't not all sounds.

    When I click on "Sounds and Audio devices" in the Control Panel, I see "No Audio device".

    I tried all the troubleshooting options. I think I need to download new audio drivers, but I can't figure out how to do this.

    Any help or advice would be appreciated!

    There could be a possibility that you may still need to download additional software.
     
    Perhaps, your motherboard has audio drivers available at their homesite or perhaps your sound card as well.
     
    However, if you have a brand system / pc, and then click on his homesite and look for the model number for the available downloads and updates.
     

    --
    DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail
     
     
    "stefff05" wrote in message news: 5eb879d3-2646-4a25-8e81-286abb719b2e...

    I recently installed a new hard drive for windows XP and I installed all the updates of windows updates. I plugged in an Altec speaker system exactly as I did before, but I can't not all sounds.

    When I click on "Sounds and Audio devices" in the Control Panel, I see "No Audio device".

    I tried all the troubleshooting options. I think I need to download new audio drivers, but I can't figure out how to do this.

    Any help or advice would be appreciated!

    DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

  • Catalogue lack of LR 5.7.1 after installing new hard drive

    A few days ago I was forced to install a new hard drive on my computer because of problems. I have re-downloaded all of my programs which included Lightroom. I had a disc for Lightroom 3 and then had updated to LR 5.7.1 online. I used a link to Adobe for re - download 5.7.1.  I have an Acer running Windows 7 Home Premium 64-bit.

    Now I have 2 major problems.  There are a total of 139 images in my catalog that I guess are the catalog in LR3. They appear when I click the icon in the grid. I got about 4000 processed images so why don't others appear under all the photographs?

    The way I work is to download my camera pictures in folders on my hard drive which is now renamed F drive.  Then I pass to the ones I deal with in Lightroom. Which causes probably my second problem. When I click on set to the point that one of these images to 139, the file is not found.

    How do I find the catalog for the rest of the 4000 images and how to 'find' the images first 139?

    Thank you.

    These photos are considered to be 'missing' by Lightroom... I can say because it is an icon of exclamation point on each of the photos in the Filmstrip at the bottom. You must reconnect the photos in Lightroom by pointing to the actual location on the hard disk of this photo, or alternatively, you can log records both.

    This document explains and illustrates how to do this.

    Adobe Lightroom - find moved or missing folders and files

  • Help with Bluetooth after installing new HARD drive

    The hard drive failed on my laptop HP Pavilion dm4 3099se Beats Edition son. I replaced the hard drive, installed and activated Windows 7 64 bit (using the key supplied with the notebook windows). I used an oem Win7 disc, not the recovery disk.  Then I installed the drivers needed to make it work again. But I can't get the Bluetooth works, even if the wifi works. Use the Intel ProSet Wifi driver but the Intel ProSet Bluetooth driver returns an error when it is installed... and Bluetooth does not appear in Device Manager.

    I installed the ProSet software also. It is also an error "can not properly installed. I have not installed the HP software (which I hope it is not necessary).

    Is there than a bluetooth radios category in Device Manager?

    If so, then the generic microsoft drivers have been installed.

    Otherwise, the device is not enabled and is not being picked up by Windows.

    If you have not installed the software of HP connection manager, and who controlled the bluetooth when you reinstalled the hard drive, you need to install this software, turn on the BT using this software and go from there.

    On some HP business notebooks computers where the wizard wireless HP (predecessor to the HP Connection Manager software) controlling the wireless and bluetooth at the same time and no device showing in Windows when I reinstalled the operating system, which has happened to me.

    After installing the Wireless Assistant software, the two aircraft were then visible and I was able to install the drivers.

  • Restore itunes after installing new hard drive

    Very well. I have a HP DV2726ca the HARD drive was not. I have several external hard drives. I backed up my music folder and then just copied the contents of the folder this music in the new music folder.

    When I open iTunes I see not those exclamation points or I see a bunch of clouds. shouldn't the fact that I kept physical copies say that I wouldn't have to download anything?

    I have a "iTunes folder" and a folder named "music m4a files.

    I put all my songs inside this folder "automatically add to iTunes".

    I'm so confused. In the past, I had more easily. right now I don't have one of my playlists. I clicked on see the duplicates and there were many, some are same as triples.

    I allowed my computer again. I don't understand why I not see an exclamation mark on the left side of the song or I get a rating of icloud. not sure if there is something that needs to be downloaded to play my protected music old ones I bought 128 and require authorization for the file set.

    I had installed 10 windows but I have problems to install again on windows 7. my computer gives me several s bluescreen per day. I told someone the errors, and then he said sounds like a HARD drive problem. whenever I did the test drive HP that it would fail within a second. so I bought another 500GB which is what I had in this laptop before.

    This laptop comes with Windows Vista. I upgraded to 7 years and then updated on 29 July. It does not appear that I can install windows 10 so I just want things to normal with windows 7.

  • recovery after installing new hard drive

    The recovery disc will reset windows on a new hard drive with the key at the back of the pc

    Yes.

  • Satellite Pro 4280 - what is the size of the HARD drive?

    I just bought a laptop Toshiba Satellite Pro 4280. According to the manual, it should have a 6.0 GB HDD but in my computer it is shown as having only a 1.34 GB capacity.

    PS I formatted the disk to remove the former owner data and operating system and you have installed Windows 98SE

    [Edited by: admin]

    Hello

    Satellite Pro 428Xcdt was certainly delivered with 6 GB HARD drive.
    Are you sure that you have checked the size of the HARD drive correctly?

    I guess the 1.34 GB is a free space on the HARD disk.

  • Just installed new hard drive 1 TB

    Just installed new hard drive 1 to and vista only reads only 127 GB. How can I get vista to recognize the full 1 TB

    http://www.vista4beginners.com/how-to-manage-your-disks-using-only-Windows-Vista-disk-management-tool

    Take a look in disk management.

    See you soon. Mick Murphy - Microsoft partner

  • Satellite Pro A120 - 169 PSAC1E: Impossible to install the 64 bit OS

    Hello

    I have the Satellite Pro A120 (169) model PSAC1E-04X024BT and I inserted 2 x DA-PA3513U-1M2G (Dane-Elec 2 GB SODIMM PC2-5300) memory, so a total of 4 GB of memory.

    I know to have 4 GB in a BONE, you need to run a 64 bit OS.
    But my processor is an Intel Centrino DUO T2050 1.6ghz (Intel Core DUO T2050).

    After reading the manual I was convinced that I am able to run a 64 bit OS... but the time of its installation, the Setup program will not continue... as my CPU is 32-bit...

    Is this true? Or do I have to change something in the BIOS? (Version 3.4)

    Thank you

    Hello!

    Yes, it true s that your processor supports only 32 bit and not 64 bit.
    Here, you check only the Intel specifications posted by redhawk.

    Sorry mate, but on this laptop, you can only use a 32 bit OS.

    Good bye

  • Satellite Pro A120 - cannot access BIOS and install Win XP

    Hello

    I ve a Toshiba Satellite Pro A120, I installed an operating system Linux on ve and uninstalled.

    When I go back to the Windows XP operating system, I just couldn't access the Bios (event the i press F1, F2) and the computer cannot start the windows XP SP2 CD too but it starts windows XP 2001 CD

    Could someone help me please

    Hello

    To access the BIOS, you can try press ESC then F1.
    Pro A120 was equipped with the Toshiba BIOS and that is why the ESC and F1 should functions.

    To boot from the CD of Win XP you can also press F12 immediately after switching on the laptop. This will start on the screen menu and there you can choose the CD/DVD drive as the boot source!

    Welcome them

  • Satellite Pro A120 fails to load after upgrade BIOS and XP to Vista

    Help

    I have problems to make my laptop to load the Windows operating system. My laptop (no X6062917H series) was purchased in November 2006. I've recently upgraded the operating system to Windows Vista (Toshiba, Promotion) and was later to upgrade the BIOS of Toshiba.

    This was done via the Toshiba site, opting for the upgrade via the Windows option. Since the upgrade of the BIOS, I have used this phone two or three times, and now I can't use it at all.

    When I turn on the laptop now, all I have is a white screen with the arrow cursor. The cursor moves on the screen that I have spend my finger on the touchpad.

    I welcome any advice on getting my laptop to the top and running, my computer knowledge is limited, please make sure it is as easy as possible

    Thank you very much

    Mr. Gibbs

    It seems that you are using the Satellite Pro A120, which belongs to the series of PSAC1E.

    It seems that the laptop can boot the operating system because the arrow cursor appears on the screen.

    Have you tried to connect the laptop to the external monitor to check if you can switch the display to another monitor?
    It would be very interesting to know if it s a graphics card problem or the internal display problem

    If you will not be able to see something on the second monitor, I recommend trying to reinstall the operating system.
    But if it is not possible to reinstall the operating system, you will need to contact the ASP (provider) in your country for the control of the laptop.

    Good luck

Maybe you are looking for

  • Lost the ability to boot to OS x

    So I had OSX and a second partition of work with earn 10 of installed with Bootcamp. Both worked very well. Then, I created a third partition through disk utility. Then I tried to start to win 10 and had an error: PC needs to be repaired, File: \Wind

  • Unable to sigh in my mobile HTC for my Skype

    Hi, I can't connect to my Android mobile Skype. When I try to sigh, device tells me-"sorry, you can't be signed at this time. Please check your mobile network settings, and then try again"... my mobile phone HTC dual 816, OS is Android 4.4.2 Can somb

  • 403 on photosmart 5520 server connection error

    Me too I have a 403 error code on my photosmart 5520. I have the router off turner & 5520, I have a connection, but still can not scan to e-mail.

  • Where mail is put for not having deleted e-mail server once downloaded to the phone?

    I can't understand where the parameter is NOT having deleted mail from the server once the phone downloads.  I want him to stay on the server, so I can access the email later on my computer.

  • Windows seems different after update.

    Why my windows menu start and other things similar to Classic view, once the updates were executed tonight? I do not like. Everything has changed