Satellite Pro A120 - screen flickers when you activate another monitor

Similar Questions

• Satellite Pro A120 cannot start when the printer is connected

  Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

  I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

  However, if you turn the printer off and turn the laptop it starts up fine!

  Its really the printer which is the cause as its only when I turned it on.

  It's never caused this problem with my old PC using Windows XP too.

  Any help with a resolution would be greatly appreicated.

  Thank you

  Adam.

  How to disconnect the printer during the boot process? ;)

• What Satellite Pro A120-I own? -You want to expand the memory

  Hi all!

  I want to upgrade the memory on my Pro A120.
  When you are looking for is the right kind, I wonder if I am owner of a
  A120-102
  A120-103
  A120-104
  etc.

  The list goes on and.

  I only know that he has a
  Satellite Pro A120 - 10 M
  PSAC1E-0QL054DU

  How do I know what AE figure should choose behind the A120 -?

  Someone?

  Thnx!

  And where you want to check the type of law?

  As you can see from the thumbnail you Satellite Pro A120 - 10 M. It's the answer to your question.
  Anyway, the memory modules compatible RAM for your laptop are:
  PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G (memory 1 GB DDR2-667 Kit)
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit)
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Your laptop can handle with 4 GB of RAM. So if you want to have the maximum amount of RAM, you must use 2 x PA3513U-1M2G.

  I have it? ;)

• Satellite Pro A120 - screen upside down

  Hi all I have a toshiba satellite pro A120 and my son took his hand on the keyboard and now the screen flipped over any ideas on what I can do thank you very much...

  Go to the graphics card-> of advanced-> ATI catalyst properties
  Select the quick settings, then the display Configuration tab and rotate the image of the office.

  There should also be a key combination which allows rotation, but it is not known to me

• Satellite Pro L300D started crashing when you are connected to the projector

  Hi all, I have a Satellite Pro L300D, have since January. In March of this year, it developed a problem.
  He began to turn the power on and off screen until I got the blue screen of death and had to reboot the laptop, also BIOS crashed. He was sent to Toshiba and got sorted.

  I use the laptop in the Church for the presentation to the powerpoint, we use a projector that connects to the video output on the laptop, but it has now begun to crash whenever I connect the projector to your laptop.

  Can I use the powerpoint, switch to the view of presenters and show the presentation of 30 minutes, then the screen goes black for about a second, the laptop and the projector off, then when they come again, I get a message saying that the display driver has been restarted, little after that the screen turns off, and then market / stop about six times before that I get the BSOD.

  Also, if I show a clip AVI or video during the presentation, it will crash soon after or even before its done.

  Have updated the drivers for laptop, I always get a message stating all the drivers are up to date and I am quite at a loss to know what to do next.

  To be honest, I'm so fed up with it that I am almost to the point of buying an Apple Mac Pro and away from Windows-based computers all together, my friends have macs and they never have any problem.

  Someone at - it an idea on what could be the problem?

  RGS
  James

  Hello James

  Can you please tell me what mode you are using for the presentation?
  Is that what this duplication mode (the same image on the LCD screen and the external device) or something else?
  Do you have problems if you use the single external device (LCD screen is OFF)?

  Movie files can be problematic if you run on laptops LCD and try to switch to the external display while the movie is running.

• Satellite Pro M40: computer stops when you press the SHIFT key

  Sometimes when I press the shift key it wonder if I want to shut down the computer. It also changes the internet Explorer mode in full screen. When it arrives it will be continually for centuries and then suddenly stop. Then start again. It seems not to happen at any given time. I disabled the hot key in the Toshiba utility and which comes to the top of the Tower stops when I pressed the SHIFT key, it does not give me the option.
  It's really annoys me because I can't just think what to do.

  Thank you

  Hello

  It's very strange. It is the first time I heard about this issue.
  As much as I know the Toshiba utility cannot add additional functions to shift and make this key as a stop button.
  I have gift? don't know if you have installed the 3rd party applications that can change the keyboard feature, but you should check this possibility.

  In addition can also be a defective hardware. Maybe something wrong with the keyboard controller. But of course the diagnostic test is necessary.

• Satellite Pro 6000: no sound when you play the CD or the DVD-audio

  Hello

  I m pretty new to laptops and so I put t know much about them, this looks like a good place to come however from the answers. Well, my problem is that when you try to play the DVD or CD, even for those who rely on the laptop there is no sound. The speakers work because I ve checked, but if I wanted to play an audio Cd or a DVD in windows media how to activate the sound? Everything works great on my regular computer.

  I would be grateful for answers.

  Hello

  In Control Panel, you can find the sound and Audio devices. Here, you can change the settings to different controls. Check if the mute option on Audio CD control is not marked.

  Good bye

• XPS 13 screen flickers when you wake up after upgrade Windows 10

  Whenever I have turn on the laptop, or reactivate it the screen upward when it darkens, the screen starts to Flash. It's as if it was glitching seconds before it stops... It lights up for about 5-10 seconds. It started to happen after that I've upgraded to Windows 10 yesterday (I got my XPS 13 yesterday). Model is the i7 with the screen touch infinity.

  I checked that I have all the latest drivers. So this software or hardware? And what I can do to fix this?

  cs_setInnerHtml ('video_8cecf91e-1548-416f-b0d3-48040316df70', ");

  Can confirm, new driver solves the problem.

  Go to Device Manager, right click on Intel 5500, update driver software.

  Thank you Dell, but seriously, you really took unreasonably long on this one.

• Satellite Pro M30 screen flickers with lots of pixels

  Hello

  2 days ago my toshiba spm 30 began to show the pixels on the screen during normal use.
  After a while they went as the screen updated normally.
  However, they come more regularly and caused the screen and laptop computer to freeze.

  They seem to come more when I move the laptop a little. Is it a bad connection of the LCD?
  Or is it due to the overheating of the CPU or something like that?

  Thank you

  Sahi

  Hello

  > They seem to come more when I move the laptop a little. Is it a bad connection of the LCD?
  > Or is it due to the overheating of the CPU or something like that?

  Have you noticed a higher internal temperature because this problem occurred?
  A higher internal temperature could cause this problem
  In this case, it would be advisable to clean the cooling modules and the vents to ensure better internal cooling and air circulation.

  On the other hand you could connect the laptop to the external LCD (monitor) If this question is displayed again.
  If the pixels will be visible on the second, external monitor then it s certainly not a bad connection
  In such cases, it s more graphic card problem

• Satellite Pro 2100 is hot when you use the knee

  Hello.

  I have a 2100.
  I started using it again after using it not for a few months.

  I noticed when it is sitting on my lap if feels very hot and the fan comes on a very large number.
  The problem is that I don't remember if it was always like this or if it's a recent thing.

  Anyone know if this is normal behavior or the computer can run a bit on the warm side of the signs?

  I have don t wonder that temperature increases when using the laptop on the lap.
  The fact is that the cooling modules are placed in the bottom of the laptop and you would clutter the cooling fans using the laptop on the lap
  I recommend to use the notebook on the desk and leave enough free space around the unit.
  Last but not least, you should check if the fans are not clogged with dust and debris.
  In most cases the dust prevents the cooling fans work properly and this leads to a higher temperature.

  Clean the cooling modules with a jet of compressed air, that you can buy it from the other computer dealers or online.

  See you soon

• Satellite Pro A120 - screen of the BIOS open for a second

  My screen BIOS, but only for a second, then goes, I can't keep the BIOS screen to check anything.
  Any ideas anyone

  That is the first time I m reading about it
  Have you tried to update the BIOS?

  Latest BIOS version found on the page of the European driver Toshiba
  Ensure that Hat you choose the good BIOS and update of system performance.

  After that, check if you can access the page of the BIOS.

• Satellite A200 - blue screen error when you try to open HWSetup

  Hello

  I get a Windows blue screen error everytime I try to open HWSetup or access from Toshiba Flash card using the Fn key.

  Any ideas how to solve this problem?

  See you soon!

  Hello!

  Using Windows Vista?
  If so, you should try to update the Toshiba value added package and hardware configuration. The two you can find on the Toshiba site:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite Pro A120 - LCD black screen - Fine on external monitor - fine

  Hi, I have a headache with a Toshiba Satellite Pro A120 mojor. The screen began to move to the blackout at random times and happens more and more. It is not serious if W
  Jayindows has loaded or if I enter the bios, boot from the CD or leave it sitting waiting for me to select a boot device. More often than otherwise, it becomes black, but you can still see what needs to be on the screen, it is simply not at all turned to see clearly. The laptop itself still works very well because it works on an external monitor and makes the system beeps, cd turns etc.
  Have you tried the following:
  Setting of various parameters in the graphics properties and in the bios but makes no difference.
  It also becomes active again if I press FN + F5 to swap monitors but turns off after a few seconds.
  It is not overheating as it's been all night and still sometimes happens when starting Cold Stone.
  I tried to start with / without battery - no difference.
  I tried to start without the disk HARD - no difference.
  I tried to remove the battery by pressing power for 60 seconds, then add the battery and new starter - no difference in power.
  I could have sworn it is the inverter, but it does the same thing with an inverter I know works! do not think that it may be graphic because it works on an external monitor and turn off.
  I'm out of ideas and looking for a genius to fix it for me please!
  See you soon

  Hey Buddy,

  > It turns on but not at all to see clear
  This would mean that the FL inverter is faulty the FL inverter of the internal LCD display controls the backlight of the screen and if the isn t working FL inverter you can see a picture, but very very dark.

  It would be a logical explanation for your problem, because there must be something wrong with the laptop LCD if an external monitor is working properly. Also if it happens in the BIOS the problem is not software.

  In your case I contact an authorized service provider and ask the guys for help. They can check your laptop and this should be done. Here, we can only speculate and discuss the different possibilities because it s just a user forum. EPA has professional diagnostic tools and can order all Toshiba spare parts.

  Good luck! :)

• Matte, non-reflecting screen on Satellite Pro A120

  Hi, I'm about to buy
  Toshiba Satellite Pro A120 Core Duo 1.66 GHz 512MB 40GB COMBO XP
  quicklinx: 454PPN
  Manufacturer part: PSAC1E-03X00YEN

  But have a question. This laptop has display Crystal Bright/True Brite etc.?
  I prefer laptops with screens "masts", non-reflets.

  If this one has 'mirror' screen, could you tell me, who do not have?
  I am interested in laptops with Core Duo and 512 MB of RAM (propably series A or L).

  Thanks in advace...

  Chris

  Hello

  According to all specifications of this notebook doesn't TruBrite display. By the way for this laptop is "money supply". Not bad!!!

  I read somewhere that Satellite A120 has the same construction as Tecra A8 and it must have really good unit interpreted.

  In any case you can check under http://www.buytoshiba.co.uk/Toshiba_Satellite_Pro_A120_PSAC1E-03X00YEN/version.asp

  Good bye

• Satellite Pro A120-106: what type of screen?

  Hello
  I intend to buy a new notebook, exactly Satellite PRO A120-106 and I found different information on the websites of the shop on display. Do you know what type of display is used in this model, TN or * GOING?

  Thank you

  Hello

  I found information that this device supports a display size screen 15.4 "WXGA TFT with an internal resolution of 1280 x 800.
  That's all what I found on the screen.

  Check out this page of presentation of Toshiba model:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=118120