Satellite Pro A120 - screen of the BIOS open for a second

Similar Questions

• Satellite Pro A120 - screen flickers when you activate another monitor

  I have a Satellite Pro A120, who has a problem with the computer screen to turn off image poor qulity (looks like interference) when you use the function key and activate a second monitor, but the image on the 2nd monitor is fine. I also discovered that the second monitor doesn't have to be physically connected to the main display having the problem, as soon as you activate the second screen the problem starts. However, as soon as you disable the second monitor, the computer screen looks perfect.

  I updated the BIOS of these two and the graphics driver, but the problem still persists.
  Any ideas?

  Why don't you tell us what portable external that you use?

  Have you tried to put the good resolution of monitor 1 (s notebook LCD) after the switch to the external display? I can imagine LCD becomes bad resolution and it must be changed.

  Please play with all the display settings. I used my cell phone so many times with different external screens and I was always able to configure this works well in any mode offered.

• Satellite Pro A120 - screen upside down

  Hi all I have a toshiba satellite pro A120 and my son took his hand on the keyboard and now the screen flipped over any ideas on what I can do thank you very much...

  Go to the graphics card-> of advanced-> ATI catalyst properties
  Select the quick settings, then the display Configuration tab and rotate the image of the office.

  There should also be a key combination which allows rotation, but it is not known to me

• Satellite Pro 4600 cannot load the BIOS update

  Satellite Pro 4600. When starting I access Windows 2000 screen and then get the blue screen "The ACPI BIOS in this system is not fully compatible with ACPI." Please contact etc etc for BIOS updated. I downloaded version of update of the BIOS 2.60 since the Toshiba site and installed with a message "installed successfully". I always get the "bluescreen". Where I'm going wrong? Help would be appreciated.

  Y at - it the ability to boot the operating system in safe mode? It works correctly?

  Did you have a new installation Win2000?
  Give us more information.

• Satellite Pro 6100 - after updating the BIOS, it does not

  Hello

  I am trying to upgrade my old of Satellite Pro 6100.

  I started to upgrade the Bios via download from Toshiba (using WIN) site - OK downloaded zip files and installed, machine then stops. Problem, it does not restart - it's so now I have a laptop 'death' that is not responding to any key I tried.

  Any suggestions of resuscitation?

  Already I've updated from XP to SP2.

  Thank you

  Paul

  Hello

  It sounds like that the BIOS update has failed and your laptop can start t again. But try this workaround:
  Remove the AC adapter and the battery and then wait an hour. After that reconnect the adapter AC/DC and battery. Try to start the laptop.

  If it doesn t work I think that the motherboard needs to be replaced or you go to an authorized service provider. Technicians can reflash the ROM module
  But maybe you can find a motherboard of second hand cheap on eBay

  Good bye

• Satellite Pro A200 - question on the BIOS update

  I have a Satellite Pro A200 (PSAE7E) with Windows Vista and XP that have been installed recently.
  In the driver of Toshiba page (BIOS update) says:

  "This Bios is only compatible for portable computers with Windows Vista!"

  (1) should I update my BIOS (1.4) or it'll be a problem for my windows XP?

  (2) anyone has try?

  (3) is there documentation on the BIOS updates (bug fixes, etc.)?

  Hello

  I will try to be very short with answers:
  1. If you use Windows XP Home edition on your laptop have BIOS update with the version 5.30
  2 this version of BIOS is available for days and it is possible that many people already tried. By the way: until Toshiba out something that is tested and verified.
  3. Unfortunately there is documentation about bugs and patches, but the fact is that Toshiba has designed the 5.30 version to support the features of Windows XP Home edition on the models of laptops designed Vista

  Good bye

• Re: Satellite Pro L300 - update after the BIOS, Windows will not start

  Hello

  I updated the BIOS on my laptop to the latest version and now it does not start in Windows. I can get to the BIOS menu. I tried to restore the default values and saved the day, but he's just a blue screen with writing on whichIi do not have the time to read it before it tries to restart and continues to do the same.

  Any ideas anyone?

  see you soon
  Phil

  Hi chaospunx,

  Which HDD mode did you use before the BIOS update? Perhaps this option, you need to change, then Windows will start up again.

  You can choose between the mode of access AHCI and Compatible HARD disk.
  Check this box!

• Satellite Pro 410 - CDT - access the BIOS

  Please, anyone could advise if it is possible to access BIOS through a sequence of keys to change the priority of the boot to access the CD drive first. I have a damaged Windows installation and am unable to get a bootable CD of diskette or bootable to work.

  Thanks in advance.

  Hi Peter,.

  You will need access to the BIOS during system startup. DSepending on the age of your laptop and the BIOS manufacturer, the key combination may vary, but generally the following keys are used: -.

  ESC then F1 will enter the BIOS

  The F2 BIOS Setup mode

  The F8 BIOS boot mode

  BIOS F12 boot device selection mode.

  Above the keys must be held down during boot of the system, until the confirmation message usually appears on the start screen, or until the BIOS mode is displayed.

  HTH

• Satellite Pro 4280 - problem with the BIOS password

  Hello
  I decided to revive my old laptop Toshiba SP 4280 but failed to get the system because he wants me a passowrd initially.
  I have tryied to get out a map of Moser for 24 hours battery - but it did not help.
  I tried a few passwords backdoor, like Toshiba, toshy99, but it did not help.
  I've successfully upgraded BIOS the most recent a 2, 70-TRAD, but again he asks me a password.

  Could you help me please with this problem?
  What can I do?

  BTW, I can't get into the BIOS Setup and select the source of loading (Hard, FD or CD) because I have to enter a password first.

  Thank you very much!

  Hey,.

  Unfortunately, I don't think that an authorized service provider can help you get rid of the password because they have special tools to do and how to do it. Maybe some jumpers must be defined, but I put t know

  On the Toshiba Web site, you can find a list of aspic call them and ask for help, all that s! ;)

• Satellite Pro P100: What is the part number for Toshiba for a 2 GB memory module

  Unable to find any sort of emailing this issue so I posted on the forum. Of course this info should be more easily accessible without having to ask.

  What is the number of part of Toshiba for a 2 GB for a PSPA4E-00F007 memory module. It's a satellite Pro P100 T2400

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 115421

  Gives memory crucial me this module - is that correct?
  http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304

  Found, via the Kingstons site - is this okay?
  http://www.dabs.com/ProductView.aspx?QuickLinx=4P3V

  Would be really grateful for official clarification here.

  Thank you very much

  It must be PA3513U-1M2G. Please check whether this module is compatible with your model of laptop. I think so.

  In any case I recommend to buy products of high quality like Kingston modules.

• Satellite Pro A300D - what is the model number for the keyboard?

  My husband managed to dislodge a key on my keyboard CAP and broke the clip white scissors that holds up on... (don't ask me how)

  He spoke of the authorized service center here in Norway and they sent us replacement scissors tongs (actually they sent an old non-functional keyboard), but the clips are of a different design to those on my laptop.

  I was wondering if anyone has an idea of the model/serial number of the keyboard used in the Satellite Pro A300D-151 (PSAK9E) so I can get the correct replacement part.

  I really don't want to have to replace the entire keyboard when it's just 1 scissor clips which is broken... the laptop is only 5 months old.

  Here are some pictures of the scissors clamp in question and where it attaches to the keyboard (sorry for quality)

  Link: [http://img31.imageshack.us/gal.php?g=1000683o.jpg]

  Thank you

  notsure

  Hello

  Boyfriend sorry but it is not possible to exchange a few individual keys on a keyboard, so in this case, you must replace the full keyboard. But normally, it shouldn't be so difficult.
  Either you exchange the keyboard yourself or you sent the laptop to the authorized service provider.

  The model number for the keyboard is not known to me but contact your ASP! They can order all the parts of Toshiba and they should know the right part number.

  Good bye

• Satellite Pro A120 - LCD black screen - Fine on external monitor - fine

  Hi, I have a headache with a Toshiba Satellite Pro A120 mojor. The screen began to move to the blackout at random times and happens more and more. It is not serious if W
  Jayindows has loaded or if I enter the bios, boot from the CD or leave it sitting waiting for me to select a boot device. More often than otherwise, it becomes black, but you can still see what needs to be on the screen, it is simply not at all turned to see clearly. The laptop itself still works very well because it works on an external monitor and makes the system beeps, cd turns etc.
  Have you tried the following:
  Setting of various parameters in the graphics properties and in the bios but makes no difference.
  It also becomes active again if I press FN + F5 to swap monitors but turns off after a few seconds.
  It is not overheating as it's been all night and still sometimes happens when starting Cold Stone.
  I tried to start with / without battery - no difference.
  I tried to start without the disk HARD - no difference.
  I tried to remove the battery by pressing power for 60 seconds, then add the battery and new starter - no difference in power.
  I could have sworn it is the inverter, but it does the same thing with an inverter I know works! do not think that it may be graphic because it works on an external monitor and turn off.
  I'm out of ideas and looking for a genius to fix it for me please!
  See you soon

  Hey Buddy,

  > It turns on but not at all to see clear
  This would mean that the FL inverter is faulty the FL inverter of the internal LCD display controls the backlight of the screen and if the isn t working FL inverter you can see a picture, but very very dark.

  It would be a logical explanation for your problem, because there must be something wrong with the laptop LCD if an external monitor is working properly. Also if it happens in the BIOS the problem is not software.

  In your case I contact an authorized service provider and ask the guys for help. They can check your laptop and this should be done. Here, we can only speculate and discuss the different possibilities because it s just a user forum. EPA has professional diagnostic tools and can order all Toshiba spare parts.

  Good luck! :)

• Can be upgraded the firmware on my Satellite Pro A120 to accept SDHC cards

  I have a Satellite Pro A120 and use the slot for SD card frequently, however, the capacity of memory cards can sometimes be restrictive, is it possible to update the firmware for SDHC cards and if so, how.

  Hello

  Unfortunately not possible since it s card reader has NO firmware and it s a stand-alone device that has nothing to do with the BIOS (firmware) of the machine.

  So, if she can't simply do not support. :/

  See you soon

• Re: Satellite Pro A120 - CD error appears

  I have problems with a laptop Satellite Pro A120. When the laptop is turned on it is possible to open the CD/DVD drive, so I know the drive functions.

  "However, when the laptop is turned on, the computer displays the screen"in touch with tomorrow TOSHIBA"for a long time, and then the screen goes black and the message CD ERROR" appears. Drive D and does not show on explore.

  I found the instructions to remove LowerFilters and UpperFilters of
  HKEY_LOCAL_MACHINE/SYSTEM CurrentControlSet/Control/Class/4D36E965-E325-11CE-BFC1-08002BE10318.

  by running "regedit", but during the restart, the laptop the problem remains.

  I tried also tried to launch the "Product recovery" CD from an external hard drive, but restarting does not account for the CD, but, once restart is completed, it can be seen that it that the external drive was saved.

  When the computer is disconnected on "memory which cannot be read" message is displayed.

  I would be very grateful for a quick response.

  Hey,.

  To be honest, if the CD-ROM error message appears before Windows starts, there seems to be a hardware malfunction. So maybe the CD/DVD drive is not recognized correctly, and therefore the Toshiba screen appears for a long time.

  Remove the caps and lowerfilters won't help you, it is a software based only

  You should look for a new CD/DVD drive. As a result, you can ask a service provider authorized in your country. They can offer you a compatible player. :)

  See you soon

• Re: Satellite Pro A120 is no sound

  My father made me a laptop TOSHIBA Satellite Pro A120 PSAC1E-0QJ052EN the other day off a friend.

  He used to have Windows XP, but a friend of my father installed Windows 7. When I try to play music or watch videos audio meter at the bottom right shows action but not his fate.
  I tried to download the new drivers and I googled the problem, but I can't get the audio to work.

  I'd appreciate any help I need sound for a school project.
  -Tom

  > watch action but no sound.
  When you open reading devices in sound properties option speakers are set by default?
  You can hear sound if you are using the headset or headphones?