Satellite Pro A200 - baterry does not load

Similar Questions

• Satellite Pro A200 - Wifi does not not after loading Win XP

  Hi, I'm new here and I apologies if this has been covered, I searched the Forum but came up to the top with nothing.

  I have a:
  Satellite pro a200
  Windows XP.

  My laptop was xp professional installed and the wifi on Board did not work.
  I had problems with the global laptop but the wifi worked. I formatted last night, installed a new copy of xp home and now wifi doesn't seem to be recognized. The light is on, the switch, but I can't get the laptop to recognize her here.

  I did not much I know, but I hope I can get it sorted.

  You have any questions, I will try and respond with as much information as possible.

  Thank you, my.

  Hello

  Please not that after the installation of Win XP, the BIOS needs to be updated!
  The Toshiba page should provide a special BIOS for Win XP OS update.

  A note of juice; the laptop could be equipped with different WLan modules and so you should be aware of chip right WiFi WLan card would not work if you try to install incompatible driver!

• Satellite Pro A200 - system does not boot

  Hello

  wondering if someone could help?
  My Satellite Pro A200 with windows XP does not start. It starts with the Toshiba screen.
  Then goes to a screen black with text where it says "PXEE61 media test failure - check cable" (I have no cable) then said out of PXErom; moves to the next screen, which lists the options: safe mode; safe mode with networking; safe mode with prompt local; Last Configeration well-known; Start windows normally.

  Which have been tried and results in loading from page turns on for about 20 seconds, then just to abandon and trying all the whole process again (before flashing a blue screen) Windows.

  Nothing seems to work - tried to take the battery on a... number oftimes and the power cable, but nothing helps.
  It's already happened, but after a few false starts gets going - but this time he just don't come out it. I could not take others where locally, but I would prefer not to because I live in Spain and need the laptop as soon as possible and do not know, I want to leave it in some otherwise are hands to the risk of wipe them the hard drive.

  So, I would be very grateful for any help as soon as possible and I fear tech short hand maybe having to explain.

  Thanks a lot, a lot.

  Hello

  I think the problem is that the operating system is not found on the HARD drive.

  The test failure PXEE61 media - check the cable appears especially if the laptop tries to boot from LAN.

  Why the laptop is trying to boot from the local network?

  Well,.

  -option may be the LAN was chosen first in the boot order in the BIOS
  -Maybe the drive is defective and so the laptop is trying to boot from LAN
  -the MBR (master boot record) is may be defective

  I think you should take the Toshiba Recovery CD and need to format the HARD drive and needs to be reinstalled the operating system.
  This should help.

  If not, then the HARD drive could malfunction and should be replaced!

• Satellite Pro A200: Wireless does not work

  Hello

  Got a Satellite Pro A200 2 weeks and the wireless worked well.
  Then after a week there was a problem, try to connect. I was able to reboot the pc and he was able to connect.

  Now it just doesn't quite work.
  I can connect through the LAN and I have another laptop that connects to the router with no problems.

  I checked in the Device Manager, the wireless card works correctly and I've updated the drivers for it but no. - GB.

  Any help would be great.
  see you soon

  Hello

  Try to remove the network adapter from Device Manager wireless.
  Then restart the computer and reinstall newest WLan driver that you can download on the page of the Toshiba driver!

  Second, you could try to set up the WiFi network using an Intel ProSet Utility (but only if you have a Wlan Intel card.)

  If you have an Atheros Wlan card, then try using the Atheros Client utility for configuring Wlan

• Satellite Pro A200 PSAE4E does not start after upgrading BIOS XP

  Hi, I need help!

  computer laptop, tested just got everything ok with Vista business and everything works fine.
  Now, I have a requirement to test a laptop duel boot XP build and follow the attached instructions to change the BIOS so that I can install XP.

  Restarted the laptop with the bios disk selected bios XP and everything seems ok.
  The phone rings, I answer. When I finished, I think back to the laptop and screen is white.
  Leave it for 20 minutes still white. Stop the laptop and reboot, no tosh start screen, nothing.

  Now does not start, so what do I do to get this thing working again?

  Hey Buddy...

  This looks very bad! :(il ressemble pas à quelque chose a mal tourné àle cours de la procédure de mise à jour dele de BIOS, et donc l'ordinateur portable ne peut pas démarrer correctement.)

  I hope that the ROM module must be flashed again.

  This can be done only by an authorized service provider.
  I see no other solution for contact ASP in your country and ask for help and handling.

  Good luck and best regards

• Satellite Pro A200-1MA - does not start after disassembly

  This is one for my laptop was overheating strongly and I decided to clean the radiator and the parts around it. I disassembled the computer laptop to the point where I can take off the cooler, cleaned and then I put everything back. The problem is now it won t work.

  It starts normally, past in loading windows (I have Windows 7 sp1) and then after 10 seconds, or it just stops. I tried to go to the bios, but it does the same thing after 10 seconds. First, he showed BSOD with no explanation. Just somewhere stopped working and it has to stop, but I can't figure what. CPU should be fine, it can t overheat in 10 seconds if it s cooler nor starts loading Windows in order to RAM and HARD drive may also be excluded.

  My best guess is that I'm connected to something wrong, but I disassembled it 3 - 4 times today and can t find something that is not connected. When I remove the top plastic I need to disconnect this son: speakers, power button, touchpad, keyboard and one other connectors 2 or 3 which I am sure they are USB, LAN & maybe etc...

  Then, can you at least tell me where to start? What to check?

  Hey,.

  I also can say with certainty what happened exactly, but fact is laptop disassembly is not easy and should be made only to professionals. If you take apart a laptop computer, you must be connected to the land, for example to avoid electrical damage.

  Anyway, everything you can do test your laptop with factory settings (preinstalled OS from Toshiba). If you notice the same problem it s a serious malfunction of hardware and your laptop should be verified professional people.

• Satellite Pro A200 - Touchpad does not

  Hi, my touchpad stopped working a few months ago and have been using a USB mouse from instead.

  I tried to get it to work by installing the updates, and it is said that the deivice works in the control panel. I think it may be a setting or something that needs to be settled, because it only since I left the lid open one day and my cat was sitting on the kyboard, by opening a bunch of programs and settings. Although it is perhaps a coincidence?

  Any ideas would be apprecieted. Thank you, ash.

  Nice :)

  Thank you for your comments, ash!

• Satellite Pro A200-PSAE7E is not grateful USB Sennheiser Headset

  Can someone let me know why my toshiba Satellite Pro A200 - PSAE7E is not auto recognition USB Sennheiser headphones?

  What do you mean with grateful self their? As far I know Sennheiser those with USB connection built into the sound card, and therefore, you will need to install the drivers.

  Sennheisers as well, but with normal stereo jack and not the USB ones. You may edit the specific model name.
  And to check if your system is your helmet in any case, go to control panel - system - device manager and see if something changes, when you plug in your headphones.

• Satellite Pro A200 will remain not off while AC is plugged

  My Satellite Pro A200 refuses to stay switched or hibernation mode, while the charger is plugged.
  When it is running on battery, it shuts off and Hibernate normally.

  If I understand correctly he runs a program or service that prohibits the system to Hibernate or stop.
  First to find this program or service.
  Than with msconfig.exe.
  First mark all non ms to start services. Try Hibernate. If it works half of services enable and try again. This way, you will find the service that is causing the problem.
  If this isn't a service try the same thing with the start up programs in msconfig.

  Good luck!

• Satellite L300 - portable computer does not load

  Hello

  I just wanted to know roughly how much it should cost, or what can I do to fix my laptop. It does not load and I bought a new charger to see if it works but it started to load for a few days and then stopped working again.

  All responses will be apperciated, thank you.

  Hi DeeDee_1,

  If you have already bought a new charger and it doesn t work there seems to be a motherboard problem, but another part could be affected too

  Here he s just a user to user forum and nobody can tell you how much it would cost because a professional diagnosis is necessary. After that an authorized service provider can make you an offer on all repair costs.

  Then contact the guy and ask for help. They can give you a good answer ;)

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Satellite Pro P100 - sound does not when I try to use Gentoo

  Hi guys,.

  I have a Satellite Pro P100 (model: PSPA4E). I tried to get Gentoo working on it, but can not get the sound to work. In my attempts to get the operation, I've upgraded to v3.5 (some recommended forum) Bios. The sound still does not work.

  Has anyone got the same laptop and managed to get the sound to work? Or can someone advise me.

  Thank you.

  Hello

  How you try to do a little sound? With alsa? Usually you must first compile your kernel for alsa soundcard and support you as a module, then alsa can load this module when you run alsaconf user-space to configure your sound card.

  I had gentoo on my server before migrating to ubuntu server edition and I find after working with several systems of derivatives, and bsd linux gentoo is too complicated, especially regarding him emerge and trees.
  I tried to install software that was not in the portage tree correctly and the path is too long for some external incoming traffic software.
  Then based on debian.

  Welcome them

• Satellite Pro L50 - A does not illuminate

  Hello

  I took a few steps on this forum but no luck so far...

  My L50 - A Satellite Pro was working fine up until yesterday, but today, only it just won't turn on. A small orange led light appears when I connect to the power cable...

  That's what I've done so far-

  1 power cable removed
  2. using a needle, pressed force shutdown (stop) at the bottom for 10-12 seconds
  3. then I pressed the start/power button on the front for 60 to 70 seconds
  4. I have connected the feeder and then to new press button start / stop at the front for 60 to 70 seconds

  Yet the laptop does not start!

  any suggestions?

  Thank you

  Hmmmmmm... It is not easy to say what the problem is here.
  Have you used your computer laptop usual ot, you might update something?
  In general, there are steps that you did which could be responsible for your problem?

• Satellite Pro M10 PS630E does not start after upgrading CPU

  I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
  He initially has a 1500, I tried to put a 1766.

  I follow the maintenance manual, later the computer change is not star upward.
  When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

  My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
  Is it possible to get it working again.

  Hello

  The flashing light means that it has detected a hardware problem on the motherboard!
  Perhaps you have used a wrong CPU and is not compatible.

  Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

  What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
  Secondly the update of the BIOS won't help you with this problem!

  You must use a CPU that is fully compatible!

  Welcome them

• Satellite Pro U300 OS does not recognize PS/2 Port TouchPad

  I have a similar problem.

  My system doesn't recognize that the PS/2 Port TouchPad exists on my Satellite Pro U300. He acknowledges that it no longer works but when I go to Control Panel then mouse it does not appear in the list of devices.

  Help!

  Hello

  I m do not know what problem describe you exactly.
  Do you mean that your notebook computer touchpad no longer works, or did you mean the USB mouse?

  If you mean touchpad, so you should try to reinstall the driver for the touchpad.
  The European driver Toshiba page provides Synaptics touchpad drivers series Pro U300 for Win XP and Vista.
  But generally the operating system should automatically recognize the touchpad and touchpad should work even using the common internal Windows driver.