Satellite Pro A200 do not provide surond dolby room after new Vista installed
Toshiba recommends Vista ultimate and I bought a copy of full vista retail.
I did a clean install of Vista ultimate and downloaded all the Vista drivers driver Toshiba download page.
I didn't install Vista ultimate ontop of the default Toshiba install because it slows down everything and leaves a lot of things, I don't want in the registry.
The pure install works very well with all the apartment of drivers/apps to the app/driver sound (http://support1.toshiba-tro.de/tedd-files2/0/sound-20070810084617.zip).
The audio driver available for download from toshiba doesn't have a sound piece dolby and offer only stero options.
My question is: can Toshiba offer a new download for this or point me in the right place to find it?
I hope that I have phraised this ok.
any help appreciated.
Hello
First of all, it would be interesting to know what model of laptop you have...
How someone should help you without any details
In addition you can use Toshiba Recovery disk and need not fear the use of this. The fact is that all things can be removed from the system if it s not need and if you think that the register would be affected, so I must say that you are not 100% right
There is a free tool called CCLeaner. Try it. It cleans the operating system and deletes all unnecessary stuff to the registry
It's really nice
Tags: Toshiba
Similar Questions
-
Satellite Pro A200 does not recognize the hard drive, XP Pro
When I try and load XP Pro SP3 (32 bit) it will not install because it doesn't have SATA drivers. I downloaded the drivers and have an external floppy drive to install drivers by pressing F6. My question is the machine is listed as 64-bit and XP Pro is 32-bit. Choose the drivers ICH8M 32 or 64 bits. IE is the 32 or 64 bit on ICH8M see hardware or operating system. Computer's Satellite Pro A200 PSAE4E-01700WEN.
Any help appreciated
Dave
Hello
If you are using the 64 bit OS, then also use 64-bit drivers.
I found very nice HowTo from Toshiba.Check it! It s certainly interesting and should be useful.
* + How to integrate a SATA AHCI driver into a Windows XP Setup CD + *.
http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm -
Satellite Pro A200 - does not start with 4 GB of RAM
Hello
I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3
Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit
Hi caribman
What Satellite Pro A200 you have exactly?
I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!
-
Satellite Pro A200 does not load if current enforcement
Hello
I have a new Toshiba Satellite Pro A200 on Vista. I have a problem with the power adapter and charge socket.
It will start and run very well and when turned off will charge the battery of fine food. But when running, the machine automatically runs battery, no network and does not load.This means that the battery is sinking and ended up to be recharged so just off the coast.
When the power supply is removed and then reinserted, it will load for maybe 30 seconds, then stops to load again initially and continues to run on battery.
At the same time, the blue light of indication on the front of the machine lights up to indicate that the ESA is connected and detected, and on battery defiler on windows in States ' ac connected, not charging battery "-in other words it works of ac and is detected but the machine isn't use to run power supply or load unless it is turned off...Can anyone offer a solution?
Thank you
That s very strange and I guess that this problem could be linked to the hardware problem.
Either it's a defective battery or there is something wrong with the electronic power supply on the motherboard.
In my opinion, there is only one way to know what's wrong some diagnostic tests are needed.
This test can be performed by a technician of the ASP.
That is why it s advisable to contact an ASP in your country for audits.This is a new laptop and warranty should cover everything!
-
New Satellite Pro A200 does not charge
I have a new Satellite Pro A200, I've had for about a week. Initially he was charging fine, now it won t load and I have to run to the network it all the time. For the first few seconds after lighting it seems to be loading it then does nothing.
Can anyone suggest what could be the problem? Or should I return it?
Thanks in advance,
CATHello cat
Before you start to speculate on potential problems I recommend you contact your dealer as soon as possible. The laptop is new and everything should work fine. The behavior described is certainly not normal and may be that something is faulty.
Please contact your dealer and explain the situation.
-
Satellite Pro A200-1 mn has sata controller OK needed for xp install
Hello
I thought that I had the correct file for my installation of xp on my floppy drive but windows setup cannot yet see my hard drive
I do not have the recovery media so this problem
Satellite Pro A200-1 mn
PSAE4E-01R00WENI like 82801 sata ahci controller and ich8m storage controller 2850
It does not however love them, can anyone help?
Hello
In the Bios, you can set a, compatible, mode and try to install xp, then. Then, you can try reinstalling the sata drivers in win xp environment.
-
Satellite Pro c660 does not connect to another wireless after format
Hey all,.
I have a Satellite Pro c660 and bought a copy of windows 64 bit with him - the laptop come with many software from toshiba on what I wanted really, I therefore installed windows 64 bit (fitness in the process).
After the Installation I had some problems connecting to my wireless home (he was missing drivers, but have now install) but finally got it works.
After having taken it round my friends last night, I could not connect to its wireless - the password has been good and I could see the network, but he just kept constantly defect - its network was on it, because his cell phone he was performing. -The only difference between its network and the spirit (that I can see), it's that she was using the TKIP encryption to connect, while I was using AES (my network card is Atheros). -Even when I tried to configure a network profile and have it automatically connect (using the same information she used, including the TKIP encryption) - it was always not.
The ideas people? More missing drivers?
PS - I really don't want all that toshiba nanny software on the laptop.
Thanks in advance!
> Any ideas people? More missing drivers?
If you can see the Wlan network then it means that the WiFi adapter driver is correctly installed and the problem is between the router configuration problems WiFi and wireless network card.
Are you abele to connect to other networks wireless at home?
Please disable encryption settings in the Wlan router and try to connect to the Wlan that is unprotected.
But note; This must be done only for testing purposes!You should also check if the MAC address filtering is disabled in the settings of the router.
-
Satellite Pro A10 does not pass the Windows page after removing SP2
Hello
I have a toshiba laptop Satellite Pro A10.
I installed windows service pack 2 week last to try to get one of these dongles TNT to work, he never so I uninstalled service pack 2 I was going to try and reinstall it to see if it would work.Now, my problem is that the laptop will not go at all, it gets to the windows XP page and then everything stops, someone could help me I don't know what to do!
Thank you
SharonHi Sharon
Seems that the system files are corrupted on the HARD drive.
All of the installation and the removal of the service pack has damaged some files or registry entries.I don t think you will be able to resolve this situation without reinstalling the OS.
In my opinion, it's a better way to get rid of this problem.Take the Toshiba Recovery CD and reinstall everything.
If you want to back up your data, I recommend to connect the internal HARD drive to another computer via the external USB HDD controller.Good luck
-
Satellite Pro A200 does not start
Hello
I have an A200 with XP PRO installed.
After a defrag routine and restart the laptop when starting BACK gets to my page of the screensaver then made noise off closing down.No toolbar appears is just all right tomy log in page and I have to stop him?
When I try to restart in one of the three security modes, again once I get to the log in step press enter screen flickers twice and get the login page again?
I took the stick of Ram and a HARD drive to see if something goes wrong, but both seem good...Christmas Eve and your laptop. Yes I know. Get a life.
Can anyone help?If you can not start even your laptop in safe mode, it's very bad situation.
What you can try is to get the facilities of Microsoft CD and tries to start up with it and use the REPAIR option.If this will not help I really don't know what you can do outside of the new installation of operating system with recovery media.
You have important data on the HARD drive? -
Drive CD of Satellite Pro A200 is not digitally signed?
I can't use the CD drive on my laptop, Device Manager displays a yellow triangle with an exclamation mark inside. I updated the driver but it still does not load and I get a message from Device Manager: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).
Any suggestions on how to solve the problem?
Thanks for this great info!
-
Re: Satellite Pro A200-20J not showing life battery
My laptop does not show remaining, only remaining %s.
Is there a solution? I can't find anything on the forum...This isn't a problem but fact!
Still is it Vista displays the rest of the power of the battery percentage.
I have an A210 with Vista operating system and the battery life expectancy is displayed is percent when I move the cursor over the battery icon in the taskbar.
See you soon
-
Satellite Pro L10 will not start - green turns off after 3 seconds
Hello
Having a L10 (PSL15E-01J018EN) and when you press the button, the led ON / STANDBY on the front lights up green for about 3 seconds and then past off the coast. It accomplishes this task for the sector or on battery and there is no other life. Anyone know what may be the problem?
Thank you
Melv
Hello Melv
Remove the battery, connect your laptop to the power adapter only and try to turn on the L10. If this lets wait a few minutes and put the battery in place and watch if the laptop works as usual.
Please let us know exactly what is happening.
-
Satellite Pro A200 - Wifi does not not after loading Win XP
Hi, I'm new here and I apologies if this has been covered, I searched the Forum but came up to the top with nothing.
I have a:
Satellite pro a200
Windows XP.My laptop was xp professional installed and the wifi on Board did not work.
I had problems with the global laptop but the wifi worked. I formatted last night, installed a new copy of xp home and now wifi doesn't seem to be recognized. The light is on, the switch, but I can't get the laptop to recognize her here.I did not much I know, but I hope I can get it sorted.
You have any questions, I will try and respond with as much information as possible.
Thank you, my.
Hello
Please not that after the installation of Win XP, the BIOS needs to be updated!
The Toshiba page should provide a special BIOS for Win XP OS update.A note of juice; the laptop could be equipped with different WLan modules and so you should be aware of chip right WiFi WLan card would not work if you try to install incompatible driver!
-
Satellite Pro A200 - Fn keys does not work with Windows Vista
Hello
I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.
Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20 - WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]After the installation of the operating system, I installed "Value package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) that contains the "utility Flash Cards". In my understanding, the installation of the "value added package" should allow the use of Fn keys.
This doesn't seem to be true or not true.Here's what's happening.
-Prior to installation of the 'value-added' package, all Fn keys did not work.
-After installation of the "value added package", if the process of TCrdMain.exe is running, all Fn keys do not work.
-If I remove the startup TCrdMain.exe and I restart the PC, only a few keys Fn function (Fn + ESC, Fn + F1).There is no way (or I have not found a way) for all keys Fn works.
Someone knows how to fix this?
Thanks in advance,
mme000
I am not sure, but it may be because of the SP1. I installed Vista Ultimate on A200 and stuff all listed (drivers, tools and utilities) from Toshiba support page.
Contains your Vista DVD facilities SP1 or you install on your own? If you install Vista Ultimate Edition (without SP1) and all the stuff on the Toshiba support site order Instructions of facilities.
-
Satellite Pro A200 - Supervisor Password Setup Utility fails
Hello
I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.
Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site (http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT).
BIOS version is now 2.20 - WIN32After the installation of the operating system, I started to install different drivers and utilities to download them from the Toshiba site.
When I try to install the "utility supervisor password" Setup fails with a box of message that says "serial number is not valid.
Same problem with a different Installer: "utility of Support Flash Cards.Someone knows how to solve this problem and what serial number is not valid?
Thanks in advance,
mme000
Hello Hana
If someone has to take care of the warning, it's Microsoft. They offer something new and they know with certainty that he could have different negative influence on the operating system running well.
Toshiba may just try to react and change has tools and utilities, but it's not easy. you will see that soon or later Toshiba will offer updates for all non-working stuff. The same is with WXP SP2.
By the way: interesting Toshiba on Vista SP1 - http://aps2.toshiba-tro.de/kb0/TSB84026M0000R01.htm article
Good bye
Maybe you are looking for
-
Windows Vista Dell laptopFIOS high speed internet
-
My 1210 will analyze any more. using pc pavilion elite 9230
1210 worked well, but solutions of HP is unable to find a solution to the problem. This is a new computer.
-
IIS and sql server 2000/2005 if problems ip address and host name changed
Windows Server 2003, IIS 6.0 + SQL SERVER 2000/2005 Is there a problem if ip address and host name of the server is changed? for example IIS 6.0 may still work properly? SQL Server 2000/2005 can still start correctly? Thank you!
-
Computer is stuck on 36 of 41 updates Windows 7 Home Premium
I did a reboot on my PC and appearantly were 41 new updates that needed to be done. PC is stuck on 36 of the 41 and has been for about 2 hours now. How to get out of it without destroying my OS as seeking answers on that it seems that the warning o
-
I need to update my windows now. How do I do that?
Repeat with my computer and need to update my windows. Have the computer configured for automatic updates, but not happening and I can't risk waiting. I have not yet learned to service pak 2, yet. Help!