Satellite Pro A200 does not load if current enforcement

Hello

I have a new Toshiba Satellite Pro A200 on Vista. I have a problem with the power adapter and charge socket.
It will start and run very well and when turned off will charge the battery of fine food. But when running, the machine automatically runs battery, no network and does not load.

This means that the battery is sinking and ended up to be recharged so just off the coast.
When the power supply is removed and then reinserted, it will load for maybe 30 seconds, then stops to load again initially and continues to run on battery.
At the same time, the blue light of indication on the front of the machine lights up to indicate that the ESA is connected and detected, and on battery defiler on windows in States ' ac connected, not charging battery "-in other words it works of ac and is detected but the machine isn't use to run power supply or load unless it is turned off...

Can anyone offer a solution?

Thank you

That s very strange and I guess that this problem could be linked to the hardware problem.
Either it's a defective battery or there is something wrong with the electronic power supply on the motherboard.
In my opinion, there is only one way to know what's wrong some diagnostic tests are needed.
This test can be performed by a technician of the ASP.
That is why it s advisable to contact an ASP in your country for audits.

This is a new laptop and warranty should cover everything!

Tags: Toshiba

Similar Questions

  • Satellite Pro A200 - does not start with 4 GB of RAM

    Hello

    I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3

    Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit

    Hi caribman

    What Satellite Pro A200 you have exactly?

    I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!

  • New Satellite Pro A200 does not charge

    I have a new Satellite Pro A200, I've had for about a week. Initially he was charging fine, now it won t load and I have to run to the network it all the time. For the first few seconds after lighting it seems to be loading it then does nothing.

    Can anyone suggest what could be the problem? Or should I return it?

    Thanks in advance,
    CAT

    Hello cat

    Before you start to speculate on potential problems I recommend you contact your dealer as soon as possible. The laptop is new and everything should work fine. The behavior described is certainly not normal and may be that something is faulty.

    Please contact your dealer and explain the situation.

  • Satellite Pro A200 does not recognize the hard drive, XP Pro

    When I try and load XP Pro SP3 (32 bit) it will not install because it doesn't have SATA drivers. I downloaded the drivers and have an external floppy drive to install drivers by pressing F6. My question is the machine is listed as 64-bit and XP Pro is 32-bit. Choose the drivers ICH8M 32 or 64 bits. IE is the 32 or 64 bit on ICH8M see hardware or operating system. Computer's Satellite Pro A200 PSAE4E-01700WEN.

    Any help appreciated

    Dave

    Hello

    If you are using the 64 bit OS, then also use 64-bit drivers.
    I found very nice HowTo from Toshiba.

    Check it! It s certainly interesting and should be useful.

    * + How to integrate a SATA AHCI driver into a Windows XP Setup CD + *.
    http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  • Satellite Pro A200 does not start

    Hello

    I have an A200 with XP PRO installed.
    After a defrag routine and restart the laptop when starting BACK gets to my page of the screensaver then made noise off closing down.

    No toolbar appears is just all right tomy log in page and I have to stop him?

    When I try to restart in one of the three security modes, again once I get to the log in step press enter screen flickers twice and get the login page again?
    I took the stick of Ram and a HARD drive to see if something goes wrong, but both seem good...

    Christmas Eve and your laptop. Yes I know. Get a life.
    Can anyone help?

    If you can not start even your laptop in safe mode, it's very bad situation.
    What you can try is to get the facilities of Microsoft CD and tries to start up with it and use the REPAIR option.

    If this will not help I really don't know what you can do outside of the new installation of operating system with recovery media.
    You have important data on the HARD drive?

  • Satellite Pro C660 does not illuminate

    Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

    any suggestions?

    Hello

    On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
    After doing this connect the power running and try to start again.

    What happens when you do this?

  • The product key on my Satellite Pro P300 does not work

    The product key on my Satellite Pro P300 does not work.
    I entered the key from the sticker on the back of the computer. What I am doing wrong?

    Hello

    Why use this product key?

    Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

    Second, it's an OEM key and it will not work with other versions of Vista!

    Cheers mate

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite Pro 4230 - does not light

    Hello
    I have the following problem:

    A Satellite Pro 4320 will not feed, DC-in light is on (green), with inserted (quite old) battery, the quickly flashes orange, (charge of compensation, according to manual) battery. If I press the power button / stop, DC-In goes off for half a second and turns on, that of all, nothing else happens.
    The power supply is 15V 4Amps one correct, I load tested it works and provides all the power, according to the specifications. It does not matter if the battery is inserted or not.

    Now the question: is this a battery problem or there is a problem with the entrails of laptops (internal DC converter)? Normally, your laptop should work on the included power supply.

    Best regards
    Nohab.

    Hey,.

    > Normally a laptop should work on the included power supply.
    You're absolutely right, mate. All cell phones work with power supply only, theoretically, a battery is not necessary. That's only important if you want to work without power, otherwise laptop mobile working with power supply only. No battery is needed.

    So my personal opinion it of a card mother dysfunction :(

  • Satellite Pro A10 does not start - no hard drive

    MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
    WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
    CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
    DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

    Hello

    HARD drive is visible in the BIOS?
    If this isn't the case, then this means that the HARD drive is faulty.
    Try to replace the HDD with a compatible and try again.

    Good luck

  • Satellite Pro L300 - does not start form DVD

    Problem: my Satellite Pro L300 will not start no optical drive (DVD)

    Leisure problem scenario:

    Insert the DVD Toshiba recovery in optical disc drive,
    Restart and during the boot prompt, press F12 and select the optical drive.
    Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

    Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

    Model No.: PSLB1E-02200GG3
    Serial 78685377Q

    I'm doing this because I want to change the OS from Vista to XP.

    Hello

    Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

    Have you tested with any other CD bootable (Linux)?

  • Satellite Pro C650 - does not start

    Hey all,.

    My Satellite Pro C650 boot not beyond a certain point. I tried to start in all modes different for example safe mode, mode of networking,

    However this proved unsuccessful, the laptop freezes and I meet a constant and regular beep at the same point every time that I try to start. I even tried to start Linux 12.04 USB to see if it's hardware or software, unfortunately is the same, which means hardware failure.

    The problem is that I don't know the bios beep codes and I can't understand what needs fixing.
    I was hoping you could help me!

    Thanks :)

    I think you need professional help with this problem. I don't know if your laptop is always guaranteed to be valid, but in my opinion, you should contact the nearest Toshiba authorized service provider and ask for help. They have special diagnostic tools and hardware malfunction can be detected and repaired.

    For the addresses and phone numbers, visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • Drive CD of Satellite Pro A200 is not digitally signed?

    I can't use the CD drive on my laptop, Device Manager displays a yellow triangle with an exclamation mark inside. I updated the driver but it still does not load and I get a message from Device Manager: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).

    Any suggestions on how to solve the problem?

    Thanks for this great info!

  • Satellite A300 PSAG8E does not load

    I have a Toshiba Satalite A300 PSAG8E, which does not load.
    I was given a few days ago by a person stating that he is not working or light - vague details.

    At the reception that he turned on, asked to start windows normally or not, then started absolutely perfect, it powered by the charger, no problem.

    I let him on during some time different tasks.
    I came to him a few days later to find that he had himself set to off.

    I enabled again, how he asked to start windows normally or not. I started normally, and it came on the property.
    Since then I could not to power it on the sector.

    Why not load it now?

    Hi mate

    > Since I could not to power it on the sector.
    > Why didn't he care now?

    I m a bit but confused. What's wrong now? You are not able to feed the device or battery is not charging?

    If you are not able to turn on the unit, then you should try this:
    -Disconnect the battery and AC adapter
    -wait a while (2-3 hours)
    -connect the two parties to laptop and check again

    If your battery does not load:
    Try to update the BIOS and set its default value
    If that does not help, then the battery should be checked
    If the new battery does not solve the problem, then the motherboard must be checked and replaced if necessary.

  • Satellite A300-288 does not load the operating system

    Hello everyone.

    Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

    Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

    Thank you very much for your help.

    Start your laptop with F8 and test if you can start the operating system in safe mode.

Maybe you are looking for

  • Acoustic bass on Satellite Pro L10

    We have a laptop Toshiba SPL 10 and whose gain is completely turned on the mic line upwards and with the microphone boost activated at the level of the line is still very low. Is there anything that can be done with it. I've updated to the latest dri

  • Tab 2 A10-70 - create a new user

    Need to create a new user account but can't find this sub settings according to manual I should have a PERSONAL option? Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  • Remove the apple programs

    How can I remove Quicktime from my computer and all the programs Apple. I went into the control panel and tried, but I got a message that this program is a network service. I can not remove this program, I also want to delete itunes as well.

  • Copy of file is slow Vista. Hard copy of hard disk drive.

    I am running 2 windows vista machines, 1 Home Premium the other company. I'm exceptionally slow copy speeds. The two are running Vista SP2. I have had a look for solutions and currently only found solutions relating to the network copy. This is the c

  • HP Envy 4500: Adding multiple printers Envy 4500-specific names

    Our small firm just bought 6 HP Envy 4500's and I would like to put it all wireless.  The gentleman who suggested this all-in-one printer on the other had his office and we showed how it worked and said that we could identify each other something dif