Satellite Pro A200 does not start

Similar Questions

• Satellite Pro A200 - does not start with 4 GB of RAM

  Hello

  I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3

  Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit

  Hi caribman

  What Satellite Pro A200 you have exactly?

  I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite Pro L300 - does not start form DVD

  Problem: my Satellite Pro L300 will not start no optical drive (DVD)

  Leisure problem scenario:

  Insert the DVD Toshiba recovery in optical disc drive,
  Restart and during the boot prompt, press F12 and select the optical drive.
  Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

  Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

  Model No.: PSLB1E-02200GG3
  Serial 78685377Q

  I'm doing this because I want to change the OS from Vista to XP.

  Hello

  Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

  Have you tested with any other CD bootable (Linux)?

• Satellite Pro A200 does not load if current enforcement

  Hello

  I have a new Toshiba Satellite Pro A200 on Vista. I have a problem with the power adapter and charge socket.
  It will start and run very well and when turned off will charge the battery of fine food. But when running, the machine automatically runs battery, no network and does not load.

  This means that the battery is sinking and ended up to be recharged so just off the coast.
  When the power supply is removed and then reinserted, it will load for maybe 30 seconds, then stops to load again initially and continues to run on battery.
  At the same time, the blue light of indication on the front of the machine lights up to indicate that the ESA is connected and detected, and on battery defiler on windows in States ' ac connected, not charging battery "-in other words it works of ac and is detected but the machine isn't use to run power supply or load unless it is turned off...

  Can anyone offer a solution?

  Thank you

  That s very strange and I guess that this problem could be linked to the hardware problem.
  Either it's a defective battery or there is something wrong with the electronic power supply on the motherboard.
  In my opinion, there is only one way to know what's wrong some diagnostic tests are needed.
  This test can be performed by a technician of the ASP.
  That is why it s advisable to contact an ASP in your country for audits.

  This is a new laptop and warranty should cover everything!

• New Satellite Pro A200 does not charge

  I have a new Satellite Pro A200, I've had for about a week. Initially he was charging fine, now it won t load and I have to run to the network it all the time. For the first few seconds after lighting it seems to be loading it then does nothing.

  Can anyone suggest what could be the problem? Or should I return it?

  Thanks in advance,
  CAT

  Hello cat

  Before you start to speculate on potential problems I recommend you contact your dealer as soon as possible. The laptop is new and everything should work fine. The behavior described is certainly not normal and may be that something is faulty.

  Please contact your dealer and explain the situation.

• Satellite Pro A120 - does not start with 4 GB of memory

  Hi all

  I'm new here so please be gentle!

  I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

  Where I'm going wrong? This model will not take 2 GB memory modules?

  Any advice will be appreciated.

  Best regards

  Dr. Feelgood

  Hello

  Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

  Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

  So please bring back the memory modules and buy 2x1GB. It will work.

• Satellite Pro L50 does not start with 8 GB

  I have a brand new L50 Pro of Satellite (PSKK3A-001001)

  Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
  I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
  The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
  He also said DDRL, which I assume is the correct type.

  The 4 GB mark was Hynix and the 8 GB is Apacer.
  Anyone have a resolution on this or know what the problem is?

  On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

  According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
  Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

• Satellite Pro L20 does not start

  I have a new satellite pro L20 M750
  does not start
  the thing is since the first time I tried to start it it would not start.
  I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.

  Thanks in advance

  Hello

  Did you check if the AC adapter is working properly?
  Initially, the battery is not charged. You must connect the power adapter to recharge the battery.

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• Satellite Pro C650 - does not start

  Hey all,.

  My Satellite Pro C650 boot not beyond a certain point. I tried to start in all modes different for example safe mode, mode of networking,

  However this proved unsuccessful, the laptop freezes and I meet a constant and regular beep at the same point every time that I try to start. I even tried to start Linux 12.04 USB to see if it's hardware or software, unfortunately is the same, which means hardware failure.

  The problem is that I don't know the bios beep codes and I can't understand what needs fixing.
  I was hoping you could help me!

  Thanks :)

  I think you need professional help with this problem. I don't know if your laptop is always guaranteed to be valid, but in my opinion, you should contact the nearest Toshiba authorized service provider and ask for help. They have special diagnostic tools and hardware malfunction can be detected and repaired.

  For the addresses and phone numbers, visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

• Satellite Pro A200 does not recognize the hard drive, XP Pro

  When I try and load XP Pro SP3 (32 bit) it will not install because it doesn't have SATA drivers. I downloaded the drivers and have an external floppy drive to install drivers by pressing F6. My question is the machine is listed as 64-bit and XP Pro is 32-bit. Choose the drivers ICH8M 32 or 64 bits. IE is the 32 or 64 bit on ICH8M see hardware or operating system. Computer's Satellite Pro A200 PSAE4E-01700WEN.

  Any help appreciated

  Dave

  Hello

  If you are using the 64 bit OS, then also use 64-bit drivers.
  I found very nice HowTo from Toshiba.

  Check it! It s certainly interesting and should be useful.

  * + How to integrate a SATA AHCI driver into a Windows XP Setup CD + *.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Satellite Pro A10 does not start - no hard drive

  MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
  WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
  CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
  DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

  Hello

  HARD drive is visible in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty.
  Try to replace the HDD with a compatible and try again.

  Good luck

• Satellite Pro M10 does not start

  My M10 Pro Sat will not start.
  Power cable shows a green light and a light orange constant and nothing else, but does nothing when the network is not pluged.

  Any suggestions? With our thanks.

  I put t know if this will help you, but what you could do is the following:
  -Unplug the power adapter, remove the battery and wait about 30 min
  -then reconnect the two parts and check to see if you can power the laptop

  It helped me in the past and maybe it will help you too.
  Otherwise:(bien, puis vous devrez contacter le technicien de l'ASP pour la vérification de l'ordinateur portable)

  Welcome and good luck

• Satellite Pro L40 does not start

  When I turn on my Satellite Pro L40 it shows me a screen asking me to start to repair windows or start windows normally.
  When you choose the option it brings me to the same screen.

  Does anyone have any ideas?

  Thank you very much

  Salvation will be

  For me, it looks like the OS installed was confused for no apparent reason
  If you are not able to boot into the Windows XP operating system and if the repair option doesn t helps to start in safe mode I n t see any other possibility as to boot from the Toshiba restore CD and reinstall the OS again!

  But note; boot from the restore CD will format the whole HARD drive and you will lose all files stored on the HARD drive. ?

  It is a drastic procedure but in my eyes he's the only one who could allows to solve this problem.

  Welcome them