Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

Similar Questions

• Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

  Help am stuck with it.

  Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

  Windows could not start because the following file is missing or corrupt:
  System32\drivers\isapnp.sys

  You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

  I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

  "File ntkrnlmp.exe could not be loaded.
  The error code is 4, sometimes it's 7.

  I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

  So any suggestions as to what wrong here

  Thank you very much

  I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

  [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

  Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

  Feedback would be much appreciated

• Satellite Pro A200: How restart after hibernation

  I must be a fool.
  I put in power button new Satellite Pro A200 to activate the Hibernate.

  Then set the BIOS password. Despite the password entered correctly, it won't start windows.
  And can't stop laptop holding down the power button to force the reboot.

  Then
  (1) how to restart short waiting until the batterys flat roll... And
  (2) when and if I get a reboot, which key (s) should I hold down to get into the BIOS.

  Thank you much for the help.

  > Despite the entered password correctly, it won't start windows.
  > Nor can I stop laptop holding down the power button to force the reboot

  You have a Phoenix BIOS? If yes then you have to press the F2 key immediately after the laptop starts to access the BIOS. But you will not be able to access the BIOS, if the password is not right and cannot be verified.

  The unknown BIOS password can be removed only by an ASP in your country. There is a special procedure that is known only to authorized Toshiba service technicians.
  Therefore, follow the recommendation and contact guys!

  PS: The laptop must stop when you press the power button for about 4-5 sec.
  If not, unplug the AC and the battery to turn off the computer!

• Satellite Pro A200 how to get a Vista 64 bit of Toshiba Recovery disk

  I have a portable satellite Pro A200 computer and I would like to install Vista 64-bit.
  As I read it, you can use the 32-bit key to install the 62-bit version. Is there a way to get the "product recovery disc" in a 64-bit version.

  Or download it from somewhere

  Hello

  What OS came preinstalled on your laptop?
  If it's a 32 bit Vista OS, then you can only get a 32-bit Vista Toshiba recovery CD.

  If you want to install another OS, no matter if it of XP or Vista 64-bit, you must purchase the operating system of Microsoft.

  PS: as far as I know the key to series used for Vista 32 bit OS is only an OEM key and it does not work with other operating systems!

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• How do you reinstall to factory settings using the recovery disk

  Hi, I created the set of recovery disks. Can you please guide me how to reinstall to factory settings using the recovery disk.
  Thank you

  Put the first disc in the CD/DVD drive.
  Turn on the device, press F12, choose ODD as device boot and boot from the CD/DVD drive containing the recovery disc.
  Follow the instructions on the screen.

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• How to remove dual-boot Vista and leave only Windows 7?

  Hello

  Yesterday, I upgraded to Windows 7 Pro. I originally had Windows Vista Home Premium. I would like to delete Vista because I did not need.

  I bought Windows 7 as a downlaod and have no disk or anything for her.

  How can I do this?

  Click Start, type: msconfig

  Press enter on your keyboard

  Go to the Startup tab

  Select the entry you want to delete

  Click on delete

  Then set the time to '0'

  Then click on apply and OK

  Restart if prompted.

  ------------------------------------------

  If the problem persists, try the following

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select Windows 7

  Uncheck the "time to display list of operating systems".

  Click OK

  Then apply and OK

  ---------------

  If it still does not respond, try the following:

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager. http://NeoSmart.NET/DL.php?id=1

• Acrobat Pro XI: How batch create multiple PDFs to images from the context menu

  After selecting the jpg or png files in a folder I would like to have an option to convert batch of rightclick

  PDF files using the Sub settings.

  

  converted to automatically save files by using the same file name in the same folder.

  At the present time, in case I for example selects 12 files, Acrobat will open 12 windows, I have to start the recognition of text and save the files.

  I have tried (!) to create an action myself and think it works, but I can't add it to the context menu have Acrobat in the background.

  

  

  

  

  Thank you

  =

  You cannot have an action from the context menu.

• How to create a bootable DVD/USB since the recovery Partition?

  Hi guys,.

  So, I have a Toshiba Satellite L505-141 (of Greece) and my broken hard drive. Unfortunately, I lost my recovery discs. I changed my hard drive, I installed the operating system, but I would like to have my computers it was (with all crapwares... Wink)

  I found a guy with the same laptop and it can send the recovery disc. In fact, he has already sent the disc 2 (he sent me two copies of his CD online) that he created when he bought the laptop (by recovery media creator). However, these discs are not bootable and (I read) that you use just them and when you restart the system through the Recovery Wizard. Unfortunately, it has not worked for me (at least with the CD of my friend sent me).

  Do you know some way that I can do? I want to get my friend a recovery disk? Can he create an ISO of the recovery partition?

  Any suggestion is welcome!

  Post edited by: GeoKoro13

  Hello

  To be honest I n t have experience with such things, but I found very interesting document in the knowledge base of Toshiba - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

  Check it out.

• How to create VI execution asynchronous step using the API

  I want to create a "run way asynchronous step VI" using the API TestStand in LabVIEW.

  Navigation on the details of the step and the properties of the object, apparently, that it is a type of 'special' step that is actually a SequenceCall.  However, I don't see how to access the data contained in this type of step.  I enclose my current VI used to 'Browse' the data for reference.

  Please advise on how to create this step.

  Thank you

  Hey LVB,

  I'm sorry, I didn't know that you always wanted to use the "Use the Prototype sequence" checkbox option.  In this case the attached code should demonstrate how this can be accomplished.

  Thank you

• How to create a report page by using the Web layout editor

  Hi Experts,

  I use wcc11.1.1.7, I need to create the report page by using the Web layout editor, but in this applet (editor), there are only 3 types of link to the page: local page, external page, query, it must be of type of the active report (historical), why I can't see them? y at - it components should I activate this?

  Best regards

  It doesn't have to be in the link on the Page, but in the Page Type.

  See the documentation for http://docs.oracle.com/cd/E28280_01/doc.1111/e26694/e02_weblayout_edit.htm#i1068085 for more details.

• Need to edit boot.ini timeout using the Recovery Console

  After a problem with my diet, I can't start... go to the flashing on the black screen cursor.  Can get F2 and F12, have run diagnostics without error.  Impossible to get F8 to answer.  Running Fixboot and FixMBR and run install completed repair and recovery console.  CHKDSK displays all good.  Still no start.  Have you noticed this bootloader timeout = 1. should be 10 or 30?  How to change or change that?

  Any other ideas?  Material is good... checked by replacing the hard drive with XP loaded.  A Win XP Pro FP2.

  Boot.ini example: http://support.microsoft.com/kb/289022
  Don't know what you are looking for here.

  With regard to the Recovery Console - http://support.microsoft.com/kb/314058
  Description of the Windows XP Recovery Console for advanced users

  Hope this gives at least you start. TaurArian [MVP] 2005-2010 - Update Services

• Satellite Pro L40 - how to move from a Vista to XP

  Hi all

  I would like some info on "how a Vista to XP downgrade?
  I have an original XP SP2. Please help...
  I tried before, but the sound does not work... help please

  Apreciate will please and thanks in advance.

  Hello

  Usually, you can find and get these fixes Windows on the Microsoft page.
  You can also try Google. Simply search for the KB888111 and KB835221.
  Many websites of third 3rd provides these patches too.

  I had the same problem in the past and resolved is to install the patches mentioned before installing the audio driver.
  As I remember, audio device marked with exclamation yellow must appear after the KB888111 and KB835221 and portable installation restart a new high definition.
  You must install the audio driver to get rid of yellow exclamation point and to get the sound functionality.

  See you soon

• How to create a section in labview using the screw configuration file

  I am trying to create a new section in Labview. All I see is the possibilties for reading of the sections and keys, write key, remove sections. Is it possible to write a new article in Labview.

  Thank you

  Brandon

  When you write to a key, you will need to provide a section.  If the section is not there, then it will be created.  Basically, you can have a section without any keys.