Satellite Pro A200: There's a problem with my screen

Similar Questions

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• OfficeJet Pro 6830: there is a problem with the printhead - estimate of repair costs?

  Getting the message "There is a problem with the printhead".  Found the document tracking and troubleshooting got to step 3 where it says "the printer to Service."

  Naturally, when I checked, I found that our guarantee missed three weeks ago.  The printer lasted more than a year...

  No idea what it would cost for this repair?

  Or given the pricing model for ink jet printers, are we better off he throw?

  We had an Epson printer that has lasted several years; Maybe we should go back to them?

  Hello

  Try to contact the HP Support by filling out the form below, you will receive a case number and the details of the phone:

  Note: Changing the country click and select your region as required

  https://support.HP.com/us-en/contact-HP/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/5390308

  Be sure to have proof of purchase available to provide the necessary technical support representative.

  In my opinion, that they might be able to help without charge if shortly after the end of your warranty period (even though I'm the head of my experience, not on behalf of HP).

  Do it as soon as possible and let me know how it goes.

  Shlomi

• OfficeJet Pro 6830: There is a problem with the printhead

  There is a problem with the print head.  Or can not find the print head

  This problem just started happening. Everything was ok after replacing the cartridges of printers with HP cartrighes for this printer, printed since the replacement of cartridges.  I followed the instructions given by your troubleshooting solutions.

  turned off and unplugged, removed and replace the cartridges back in, printed on a sheet of paper indicating that the print head was aligned, printed what he needed at the time and now does it again.  I repeated the above instructions and it just keeps saying the same thing.

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• HP OfficeJet Pro 6978: There is a problem with the printhead

  I am trying to install my new printer.  Turned on, the screen displays this message: "Is there a problem with the print head."  I have downloaded all the software and drivers, installed ink cartridges that came with your printer, followed the troubleshooting online and still the message will not go away.  I registered the product and tried to contact the HP support, only to get the message that this device is no longer supported by the HP BRAND - it's NEW!  I can't find phone # for support, so I'll try this forum.  If no help, I will just return it.  Very frustrating.

  As it is brand new is not same Jack with it. Take it for a full refund and buy something else.

• Satellite Pro P300-13i / XP SP3 / problem with microphone

  Just bought a P300-13i and a beautiful machine, it's too. It came with a XP Recovery disk for playing for a few minutes then with Vista to check all knitted OK I brought back to XP (you need to be reliable and v quickly...) I'm a "one man band") and everything seemed to go smoothly with one exception v.

  The machine is supplied with a built-in webcam and microphone. Since the downgrading to XP microphone does not at all well (poor sound volume and a lot of apparent interference) - I confirm with Vista, it worked impeccably well.

  Called Tosh who tried to get a boost function to work... but they could not find. Same re - load the driver concerned but still no result. My problem was apparently 'high', but I guess that's fancy talk for "we can not help you" because I have not heard for over a week now...

  I was wondering if there was a spark out there that may be able to help me... also borrowed USB a friend and who has worked well... but obviously bought a machine with a microphone built-in microphone, I don't want to have to lug round, a plug in mic with me as well!

  The machine is heavy enough as it is!

  Look forward to hearing from someone.

  Lindsay

  Wonderful information!
  Thanks for sharing this with us!

• Satellite Pro P300-135/Windows Vista / problem with microphone and Crystal

  Hello

  Can someone help me please? I reinstalled my Vista and my microphone does not work. When I try to plug in my headphones, they are also dead. Nobody knows what kind of drivers can be responsible for this?

  And how you try reinstalling Vista? Using the recovery image (factory settings) or you try to install the clean version of Vista?

  Sorry, but I don't see any sense why you are doing this. Your laptop comes with Vista. Is there a particular reason to achieve?

• Satellite Pro C50 - A - 1 9 - problem with special keys

  Hello!

  I tried to change something. I want to use special keys (volume, etc.) without touching the key Fn I change in the BIOS, did not help me. I tried the HW application, did not work. I still need to hit the Fn button to use the special keys. I have updated the bios to the latest version, nothing happened.

  I have Sattelite Pro C50 - A - 1-9
  model: PSCG7E

  Please help me, what can I do?

  anyone help?

• HP Officejet Pro 6830: There is a problem with the printhead (0xc19a0003)

  Hello

  Hoping someone can help me. Bought my printer only within the last few months & this error. Followed the reset of the measures recommended & also used the doctor HP soft but still no luck. Appreciate any advice.

  Thank you

  Kenny

  Hi Kenny, the best bet is to contact the HP Support that you will need a replacement printer. If you are based in the United States on the link verifying contact support at the top of this page...

  http://support.HP.com/us-en/document/c04839288

  Can you please let us know how you get on?

  Thanks, Ciara

  

• Satellite Pro A200 hangs completely, I have to close by switch

  Hello

  I got the Satellite Pro A200 (PSAE4E) for 19 months with absolutely no problem. Recently, I noticed that it crashes all of a sudden without any warning whatsoever. I have to resort to the closure of the power switch, which I hate to do. It opens normally again without giving any other major error msg that the first unexpected shutdown has occurred.

  What worries me is that it continues to be again and again. I did the built-in diagnostic test and it showed the FAILURE on the NETWORK. Rest of the things passed including HARD DRIVE, memory, cpu, etc. In the Device Manager section, there is a yellow triangle card 6TO4 and isatap. {....}. I wonder if this is the problem or is it more sinister problem with my pc.

  Any help on this would be sincerely appreciated.

  Thank you

  Hello

  AFAIK the 6to4 adapter has something to do with the TCP/IP version 6 protocol.
  You can check network properties if TCP/IP v6 is enabled (checked).
  If it s not checked then check it in.

  Otherwise, you can try to uninstall this card in the Device Manager and disable the TCP/IP v6 in network properties.

  But to be honest I put t know if this 6 TCP/IP issues has something to do with the breaking of low BONE
  In the worst case, you could recover the unit to check if the same thing would happen with a clean operating system.

• Two problems with my Satellite Pro A200

  Hello

  I just bought a laptop Satellite Pro A200 of lamia with windows Vista.
  I found I can't connect to the internet or install hardware such as cameras or printers. The installation of the system software, but the actual hardware does not work. at first, I thought that it was not compatible, but I wonder if USB ports work correctly supposed that no matter what I connect to the top, cameras, printers, mp3 pc can't find the element even if it is automatically install advice?

  Also, I am trying to connect this pc to my existing internet connection on a desktop computer. Any advice on how to do it because nothing seems to work. Cable and wireless and the laptop has an internal modem.
  Thank you

  > I found I can't connect to the internet or install hardware such as cameras or printers. The installation of the system software, but the actual hardware does not work. at first, I thought that it was not compatible, but I wonder if USB ports work correctly supposed that no matter what I connect to the top, cameras, printers, mp3 pc can't find the element even if it is automatically install advice?

  Indeed some older hardware options are not compatible with Vista. But if the 3rd party software supports Vista will not be problem using these devices.
  You know that Vista is a new OS and Microsoft releases patches and fixes regularly very important.

  I noticed this last fix that resolves to many USB issued under Vista:
  http://support.Microsoft.com/kb/941600/en-us

  I recommend the update to the Vista from time to time to fix some bugs in the OS

  > Also, I am trying to connect this pc to my existing internet connection on a desktop computer. Any advice on how to do it because nothing seems to work. Cable and wireless and the laptop has an internal modem.

  As you say your laptop is capable WLan so why you n t use the Wlan?

  I also recommend this site MS how-to:
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  concerning

• Restart problems with my Satellite Pro A200 when my dynadock is connected

  Help!

  I m a little frustrated when I try to restart or shut down to the bottom of my Satellite Pro A200 with my dynadock connection. I always turn off my 1st printer, as this used causes an error message, but the laptop crashes with the XP window...

  I have analog external (I know, anawhat?, but they work) speakers connected to the front, makes no difference whether they have or not. Drive external DRIVE is connected via USB2 port back and my LAN cable. I think I've tried everything, however continue to suffer Frost :)))

  Any ideas?

  Lot

  There may be some compatibility issues with your printer software and software dynadock
  Who knows. A thorough investigation would be necessary.

• Satellite Pro A200 failing to connect with iphone via wifi hotspot

  My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

  I have a Satellite Pro A200 and had problems connecting to various wifi connections.
  The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

  The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

  Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

  Thanks for any help that anyone is able to give.

  > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

  This isn't a question of the age of the laptop
  As far as I know not that support all mobile operators
  You should first ask your mobile operator if you can use the tethering service.

  If this would be supported in my mobile operator, then connect the iphone to the laptop first
  So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

  (PS: as far I know to attach is supported by iOS3.0 and higher)

  After that the iphone was connected to the laptop, you must activate the tethering on iphone.
  Under settings of-> network, you should see the option internet tethering it must be enabled.
  Now you should be able to see that in the Network & Center sharing control panel.

• Satellite Pro A200 - black screen with a blinking cursor

  Hello

  I'm new to the forum and have a big problem.
  So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
  Also just as the screen goes black a beep can be heard which shows windows boot.

  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  Please go into the BIOS settings and check if the HARD drive is listed there.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

  Good luck

• [Satellite Pro A200] - slow when problems of transfer and the warmth of the data.

  Hi people.

  I have a 1.5 years old Toshiba Satellite Pro A200 with 200 GB HARD drive standard. For some time, his behavior is just... weird.

  Sometimes the system slows down. She behaves just slow, it freezes frequently for a second when simple tasks such as entering the text. It; s busiest during intensive data transfers (e.g. copy files via FTP from my copy of the USB or LAN), but sometimes it happens even when no application other than Firefox does. It is not apparent, so I wonder - service it will take in terms of warranty (which means - is there a probability that you will say that everything is perfect and charge me for it?)
  The computer was once on the repair under warranty, they replaced the HARD drive with another. Is it possible that the other has problems as well (check S.M.A.R.T. discovers nothing). Or is it maybe faulty SATA controller?

  Another thing is the temperature. During the normal work (Internet, MS Word) two hearts runs at 60 * C. When the set temperature may exceed 90 * C and the computer sometimes shuts down. I guess the problem is dust accumulated inside the laptop but I do not see how can I clean.

  Go to the service of this kind of problems?

  Virus scanners can slow a system down considerably, what antivirus do you use?

  If you have a lot of programs installed, perhaps its time to back up your data and reinstall Windows. I do it myself every year since Windows tends to become bloated and slow after a while.

  With respect to the dust, you can Sauté using a can of compressed Air sprayed through the main entrance of air (when the system is off).
  Or if dust is really bad, you will need to send it to a Service provider authorized to do so and cleaned disassembled.