Satellite Pro A200SE-1F9 starts showing blue screen

Similar Questions

• Satellite Pro A200-PSAE7: error on blue screen - ati2dvag infitive loop

  I've got Satellite Pro A200-PSAE7 with ATI Mobility Radeon HD2600. I downgraded to XP SP2. I get a blue screen saying that ati2dvag went infitive enough loop constantly. Any solution to this?

  OFFTOPIC: Why standart drivers from ati.com to display does not work? (while on my laptop of friends with also hd2600 mobilty radeon works fine).

  Hello

  > I've got Satellite Pro A200-PSAE7 with ATI Mobility Radeon HD2600. I downgraded to XP SP2. I get a blue screen saying that ati2dvag went infitive enough loop constantly. Any solution to this?

  The BSOD appears usually due to software malfunction serious matter or material.
  I think it s a software problem (driver).

  I presume that the BSOD appears why play games in most of the cases the graphics driver must be updated.
  If the XP driver from the Toshiba page will not help, you can try the graphics drivers on the www.omegadrivers.net site. 3rd third party drivers must run on your laptop. But note; 3 third-party drivers can be used only at your own risk!

  > Why standard ati.com display drivers do not work? (While on my laptop of friends with also hd2600 mobility radeon works fine).
  Cannot install the original ATI drivers on an easy path because this drivers don t support protection against overheating. Toshiba GPU drivers are slightly modified and support a protection against overheating. This protection is necessary and important as mobile graphics cards do not have large module of cooling as the GPU on to desktop computers.
  Temperature increases on the much faster laptops and so the driver graphic control performance of the GPU to reduce the internal temperature.

  That's why it of always advised and recommended to use the Toshiba drivers ;)

• Satellite Pro M40 sometimes starts with white screen

  Hello!

  I'm pulling out my hair with this problem.

  For no definable reason that according to me, my laptop will start with a blank screen.
  Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
  For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

  My M40 is 4 months old.
  Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

  This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
  I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
  Today, however, not a week later, I have a white screen again.

  I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

  If anyone can help, or was faced with a similar problem, please respond.

  Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

  [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

  I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

  I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

  Post edited by: jazziefox

  Hello

  Thank you for your update.
  It's a very strange question, and it would be very helpful if you can put yourself more observational.

• HARD drive upgrade to 320 on Satellite Pro A200SE - 1 X 6

  Hello

  I recently bought a Toshiba laptop Satellite Pro A200SE - 1 X 6, that it came with 80 GB hard drive and I want to upgrade to 320 GB HARD disk, is it possible?

  At the back of the laptop, I found a compartment for a second HDD to HDD2.
  I tried to open it by unscrewing the screws but I couldn't take off the cover even after I removed the two screws, could someone help me on how to remove the cover HDD2? *

  Last question, what type of HARD drive I need to purchase?
  I thought it might be SATA!

  Thank you very much
  Taha

  Hello

  I m not 100% sure if a HDD 320 would go well on your Satellite A200 and BIOS recognize it without big problems.
  First of all try to test it somehow

  With regard to the second disc cover HARD;
  I have an A200 Equium and same second HARD drive Bay is available on my laptop.
  The plastic cover is fixed ONLY with these two screws and after the withdrawal of these two screws, you should be able to remove the HARD drive Bay cover too.
  I know a little bit more difficult but try to use a thin object and try to leverage.
  But be careful!

  Just a note;
  Not all A200 supports the second HDD! But the second span is always available.
  Yes, it's a bit confusing (I was too confused), but it seems that there are different models with different motherboards and that's why the second HARD disk controller is not always there.

  Welcome them

• The mouse no longer works on Satellite Pro A200-1F9 (on Windows and Linux)

  Hello. Suddenly, my USB mouse doesn't work on my satellite pro A200-1F9 laptop. I had this same problem on my Linux (Ubuntu Feisty) for the last week or two, but today was the first time that the mouse no longer works in Windows. Ideas for what's gone wrong? (If I boot Linux with the attached mouse, I get an error message when loading upward.) The mouse does not work it is logged at startup or I plug it later).

  Under Windows and Linux, the laptop still recognizes my external HD which also has a USB connection...

  Thanks, Shoko.

  In my opinion, you should test the USB feature. If you are 100% sure that the USB ports are working well check your mouse or try to use the other.

  Laptop mouse pad still works?

• How can I downgrade Satellite Pro A200GE-1F9 company from Vista to XP Pro?

  Hello

  I just took delivery of a "Toshiba Satellite Pro A200GE-1F9 - Core 2 Duo T7300 2 GHz - 15.4"TFT".» Great laptop, but the operating system is very slow... transfer files, access to the internet.

  I understand that the license allows me to downgrade to XP. The question is how can I do this, because this operating system is not ready for the technology on my laptop.

  1 Toshiba provide me with a XP OS disk?
  2 Toshiba provide me with new XP drivers for my laptop?
  3. I have trouble with XP recognizing my hard drive due to the SATA drives.

  Vista is useless because it does so not. Even Microsoft are allowing users to downgrade - please see below.

  Here are a few notes I found on the web

  **********************
  Can I downgrade my OEM of Windows version

  Vista business to Windows XP Professional? Yes. Right of demotion OEM desktop operating systems PC apply to Windows Vista business and Windows Vista Edition full, as stated in the terms of the license. Please note, downgrade versions OEM Windows Vista business and Windows Vista Ultimate are limited to Windows XP Professional (including Windows XP Edition Tablet PC and Windows XP x 64 edition). End users can use the following media for their downgrade: Volume Licensing media (provided that the end-user has a Volume License Agreement), trade retail (FPP) or System Builder hologram CD (provided that the software is acquired in accordance with the Microsoft OEM System Builder License). Use of degraded operating system is governed by the Windows Vista Business license terms, and the end user cannot use the downgrade and professional Windows Vista operating system. There is no right of demotion for Windows Vista Home Basic or Windows Vista Edition Home Premium.

  ***********************

  If you want Windows XP Pro on a new machine, Windows Vista (Business or Ultimate), and then downgrade
  I don't know how many people is aware of this, but if you buy a Windows Vista Business or Ultimate then you can use a Windows XP CD (that you have legal access to) to load Windows XP on this machine.

  When you need the product key / or need to activate, it will potentially fail, but a simple call to with your Vista product key activation center should give you all the details you need. Then, when you're ready to put Vista on this machine, you can do without the purchase of this new cost. Alternatively, you can buy Windows XP today and if you want to load Vista, you can give more money to a store for a copy again.

  For more information, go to http://oem.microsoft.com/script/sites/public/licensing.htm

  **********************

  Hello

  First of all thanks for the information on the downgrade of the OEM of Windows version.

  I bought my Satellite with Vista and it would be nice that I would get a XP for free.

  But to be honest I'm not really sure if Microsoft will activate Win XP after buying the Vista operating system. But who knows, maybe you should say with the support of Microsoft.

  To my knowledge, you will not get any additional operating system from Toshiba, but only the Toshiba Recovery CD.
  Each Toshiba laptop has been delivered with the recovery CD that contains the Microsoft operating system (XP or Vista), drivers Toshiba and utilities.

  That's all. If you lose the recovery CD, you can order the same CD/DVD with the same operating system of the authorized Toshiba service provider!

  But like I said above, a retirement details you should specify it with MS is supported.

  If you get more information from MS, please report it here in this thread. It s interesting theme.

  Best regards

• Satellite Pro A200-1F9: problem Internet after the map change Wi - Fi - SOLUTION

  Because my previous thread was closed, I have to open a new one just for this.
  I solved this problem in this http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix way and as far as I know it comes to BIOS.

  Now I have the internet connection on my Satellite Pro A200-1F9.

  Very interesting solution. Thanks for sharing.

• iPhone 5 shows blue screen and restarts automatically

  iPhone 5 shows blue screen and restarts automatically

  1. try to do a reset by pressing home and off/power button together until you see the Apple logo, then release

  2. If you can't do it you may need to restore the phone via iTunes

  (1079)

• is not in stand mode showing blue screen preparation

  is not in stand mode showing blue screen preparation

  Hello

  If you have not installed the latest service pack on the computer, then I suggest you to install and check if it helps:

  http://support.Microsoft.com/kb/310601

  For more information, see this link:

  http://support.Microsoft.com/kb/907477

  It will be useful.

• Satellite Pro P100-124 starts upward, but nothing on the screen

  Hello world

  I'm a newbie here & laptop but my companion got a satellite Pro P100 (Toshiba Satellite Pro P100-124 PSPA4E-001001EN) & it is my asked for help. Here's the problem:

  Laptop starts to go through the procedure of starting with lights coming and cd player starts to work the rotation of fans, but nothing shows up on the screen

  I said it could be the graphics card but could do with a starting point, I'm PC savvy but on the desktop, it's my first attempt at a portable computer so please be nice...

  Hello

  Have you tried this thing?

  ->, remove the battery and unplug the AC adapter from the portable computer
  -> waiting for ~ 30 min 1 h
  -> connect the two parts again and try to turn on the device

  If this will not help, then it would mean that a hardware problem serious causes this problem and you will need to contact a Toshiba ASP technician to know exactly what s wrogn.

  Good luck

• Satellite L650 - 10 M shows blue screen with Twinhan Azurewave AD-SB200

  I have the blue screen after the USB satellite map starts... Twinhan Azurewave AD-SB200

  I have Windows 7 Home Premium 64-bit

  Satellite map worked on the very nice old PC with Windows XP without any problem

  After the start of the map satellite with about 5 minutes of work, I get the blue screen, and then restart it to Windows

  Then, I get this message:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 3073

  More information about the problem:
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF80002C8F805
  BCP3: FFFFF880089F6AA0
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\083010-14882-01.dmp
  C:\Users\TOSHIBA\AppData\Local\Temp\WER-47143-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Please I need help fast

  Thank you

  This card is designed to run on Windows7?
  You have installed correct driver Win7?

  Sorry, but Toshiba doesn't support third party hardware and software so if you have any problem with Toshiba then here you are on the right place. For all other questions, contact technical support Azurewave and ask for help.
  Thay better experience with own product and I hope that they can help to make it work properly.

• Satellite P300D-12F shows blue screen by installing Win7

  Hello
  When I bought ths laptop, Windows Vista is already installed (32 bit Premium).

  Now, I bought Windows7 Prof I wanted to upgrade my system. But, is not possible. Because of the compatibility of professional and high quality of windows.
  That's why I have to install windows 7 from the beginning (New Installation, no upgrade)
  I tried to install the system

  The problem is that I always get blue screen windows

  What should I do? What is the reason for this problem?
  Thank you

  I installed Win7 on a friend's Satellite P300D month without problems.

  Here is my order of installations:
  Satellite P300D-13N and own Win7

  -win7
  -display driver
  -driver sound
  Driver LAN-
  -Supervisor password utility
  -card reader controller
  -WLAN driver
  -Infrared driver
  -Registry patch 1.2
  -Hardware configuration
  -Toshiba Assist (Vista)
  -VAP
  -ConfigFree
  touchpad driver-
  driver webcam-

  Before you begin installation remove all existing partitions and create a new partition and he chose to install Win7. That s all that I did.

• Satellite C660 shows blue screen (memory management)

  I have a C660-24f, which is around the age of 12 months, and I had the problem with it since I got it.

  There suddenly restart with blue screen (memory management).

  > I have a C660-24f, which is around the age of 12 months, and I had the problem with it since I got it.
  Why wait so long? You may contact Toshiba service whenever you want and ask for help, or at least for the good advice.

  Have you tried to do something about it?
  Clean installation of recovery maybe? Have you noticed this error when the laptop works with the factory settings?

• Satellite A210: Random Questions after several blue screens

  This morning at the College, I started my laptop (satellite A210)
  After entering the password started... after 5 seconds, I got a blue screen SHORT (3 seconds)... This can happen 5 times...
  then I was really p * ssed - I booted in safe mode... do you have a system recovery (in German "systemwiederherstellung")
  After doing that my laptop has begun... but now begins the horor

  1 Explorer.exe crash so that start up - so I have to start explorer.exe mauel with the Task Manager
  2. with this also sidebar, bar SCROLLING-option AND the menu upwards on the screen... you know... the one you get with the pointer on... then it appears and you can select things like brightness, volume or energysafeoptions...
  3. opening a folder takes almost 1 minute to show its files... (totally slow!)

  I ran TuneUp2008, O & O Defrag 10-Prof. and also ESET NOD32 Antivirus with the new definition (found nothing).

  ... Yes... what to do now? ... I don't know how to start programs from the point 2. and 3. ! Please tell me how!

  Yours sincerely Nico

  What should do?
  Take the recovery CD in the CD/DVD drive and try to restore the operating system from the Toshiba Recovery CD.
  After reinstalling the laptop should run correctly if it is not a hardware problem is possible.

• Satellite Pro A120 cannot start when the printer is connected

  Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

  I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

  However, if you turn the printer off and turn the laptop it starts up fine!

  Its really the printer which is the cause as its only when I turned it on.

  It's never caused this problem with my old PC using Windows XP too.

  Any help with a resolution would be greatly appreicated.

  Thank you

  Adam.

  How to disconnect the printer during the boot process? ;)