Satellite Pro A210 DVD Drive not working no-error code 39

Hi all

My Satellite Pro A210 dvd player does not load.
When I looked inside, he showed an error code 39.
I tried uninstalling and reinstalling but it still doesn't work.

Any ideas?

Hello

To my knowledge, the 39 error message appears if the CD/DVD drive is not visible in my computer.
You can try this workaround:
Go to Device Manager and remove the drive CD/DVD from the list of devices.
Then go to the registry (regedit) and remove upper and lower key filters:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

Then restart the device and test again
I think this should help!

Tags: Toshiba

Similar Questions

  • My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

    My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

    Hello

    Did you change your computer before this problem?

    You can follow the suggestions and check out them.

    Method 1

    You can follow the procedure in the article.

    How to resolve problems connecting to Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/818018

    Method 2

    You can reset the Windows Update components.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 3

    You can download and run the system update readiness tool.

    Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

    Method 4

    Step 1:

    Place the computer in a clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    Step 2:

    You can manually download and install updates from Microsoft Download Center.

    Microsoft Download Center

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 5

    You can disable temporary of your security software.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

    See also:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • How deactiveat elements 9 when he stopped not working, no error code.

    My 9 items stopped not working, no error code.  I am trying to disable and uninstall, however, it seems to turn off I have to be able to get the program to open.

    Thank you Jeff Wright, the third time that I chatted they disabled the program for me and I was able to uninstall and reinstall the program works now.  I had two applications on my lap top and the other on my computer when they disabled it.

    W

  • Satellite Pro L300: DVD drive eject does not & recognizes not all disks

    Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

    Please help someone,

    Thank you very much.

    What kind of help do you expect?

    You mean he s a software problem?

    I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

    The laptop seems to be is not very old, and I think that the guarantee must be valid
    How about you, communicating with ASP in your country and ask for a replacement WEIRD?

    I think this helps

  • Satellite Pro A210 - USB does not

    I have a new Satellite Pro A210 with downgrade to XP.
    I have a problem with the USB. When I plug a USB device, for example. camera or a flash drive I get the usual sound of a USB device is connected but no folder appears and the device does not appear in my computer, or disconnection of the usb device icon at the bottom right of your desktop. When I unplug the device I get the sound of the disconnection.

    The Toshiba PC diagnostic tool tests the USB also ok.

    It has been produced since I first got the computer.
    I've since updated to the latest version of the bios and use windows update to upgrade to service pack 3 and all other updates available, the problem is always the same.

    Any ideas?

    You have mapped network drives?

    Sometimes readers in network can hide removable drives such as USB keys.

    If you start while the USB is connected, it must assign a letter from reader properly.

  • CD/DVD drive does not work. Error code: 39

    Original title: CD/DVD, HELP! Help! Help!  PLEASE, I BEG YOU!

    My CD/DVD drive is not reading any CD that is placed in it.  It allows you to work just fine now nothing at all, it's not same playiing or read the installation CD "s provided with the system and they are all scans CD that came with the computer when I bought it."  I am even unable to reinstall the drivers or anything else that I've seen a code # 39, I have no idea what it means.  I have never added any hardware, I installed my old program of words on this computer which is my original windows xp, but when I installed it it never gave me any problems.

    I NEED HELP, HELP AND HELPS TO SOLVE THIS PROBLEM, IT'S THE SECOND TIME I CAME TO YOUR SITE, AND I HAVE NOT RECEIVED ANY ASSISTANCE, I'M TRYING A SECOND TIME!  Help! Help! Help! PLEASE!

    Hello

    What happens when you try to reinstall the drivers? You receive an error message?

    Step 1: Run the fix it tool in the following article and check.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    Step 2: Perform the System Restore to the date where the CD/DVD drive was working fine.

  • Satellite Pro 6100 Wireless does not work after restoring from HARD drive

    After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

    Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

    I have found some drivers Agere, but am not sure

    (1) if they are correct
    (2) how to install since the machine works in a way limited with the card in place.

    Any advice?

    Hello

    I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

    (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

    (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

    But this is only possible if the windows started successfully

    PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
    I discovered that you need to update several utilities if you have installed SP2 on this laptop.

  • Satellite Pro M10 - infrared does not work properly

    Hello

    I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click Troubleshoot to start the troubleshooter for this device.

    However, under Driver Details is said:
    C:\windows\system32\DRIVERS\smcirda.sys

    I extracted the zip file in my home directory of c:\downloads\infrared.
    whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

    Thanks in advance for any help.
    Chris

    Hello

    If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

  • Satellite Pro L300 - sound is not working properly

    Hi all!

    Last week, I bought my Toshiba Satellite Pro L300.
    I have had no operating system with the laptop, but I had my own XP, so I changed the SATA drives in compatibility mode and installed windows XP Pro.
    (By the way this is a Vista laptop officially)
    I installed all the drivers, but I have a problem with the sound. It has a bad quality, but this isn't the biggest problem.
    If I start listening to music, the sound stops every 3-4 seconds for a fraction of a second. It's as if the processor worked (like the computer was loading, and the processor is a bit overloaded) I usually have this experience if I run many programs simultaneously on my old computer, it slows down and the music stops for a second. But on the new laptop, I run winamp, I have dp nothing but listen to the music, and I get this problem.

    Can anyone help? Is it because of XP? Or the driver does not work properly? Or I have a big problem and should go back to the store?
    Please write!

    Hello

    Did you notice HARD drive activity when this happens?
    Maybe some anti-virus works in the background.

    Maybe you can order original Toshiba recovery DVD for your laptop model. Check it out under the https://backupmedia.toshiba.eu/landing.aspx

    Using WXP only? I ask this question because I believe that you can only get to this Vista laptop.

  • Satellite A100: Recovery DVD does not work

    I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

    I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

    However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

    What is the problem with that? How can I really use this recovery DVD?
    Someone help me please.

    Thank you.

    Hello

    The recovery procedure is not difficult.
    Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

    Your problem is very strange. You have created all the partitions on the HARD drive?
    I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

    Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

  • Satellite Pro L100 - DVD will not turn even upward

    My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.

    When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
    Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?

    I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
    If this is the case why Windows XP does not recognize a DVD - RW?

    If someone sees something I missed please?

    Hey,.

    Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.

    The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.

    Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)

  • Satellite Pro L300 - touchpad does not work

    Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

    http://www.ISD.Toshiba.com.au

    and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

    I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

    Hello

    > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
    I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
    I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

    In your case, I recommend this controlled again.

    By the way; My touchpad is always disabled so that en external mouse is connected.
    It is parameters that control it. Please check in your touchpad properties too!

  • Satellite Pro L10 - recovery does not work

    I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:

    For a drive partition error checking - please try again!
    Press a key to continue...

    When you press a key, then I get another white screen like this:

    X:\ >

    X:\ >

    I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks

    Hello

    Please format the HARD drive again and remove all partitions on the HARD drive.
    Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD.

  • Satellite Pro L20 - original drive not grateful

    Hello

    Ive looked for forums and the internet in general but was unable to find anything related to my problem.

    Recently, I removed the my Satellite Pro L20 original hard drive and replaced by a spare part just to test another operating system. I didn't wipe my existing windows of the original OS.

    However, now if I place the original hard drive in the laptop, it does not recognize it in the BIOS at all. The original works of disk of 60Go perfectly in an external USB caddy on the laptop, but used in their own country. At first, thought it might be the drive so I bought a new drive of 250 GB, but again, not recognized.

    Reading, I think that the original drive is an EIDE drive and I don't think that the replacement of 12 GB is drive I put in temporarily. Ive also tried reflashing the BIOS, hoping that might solve the problem, but without any luck again.

    Could you get it someone please let me know how to solve this problem?

    Thank you

    Martin

    Hello

    This s very strange problem you have deleted first disk of 60 GB, then you have reinserted and the BIOS doesn t recognize now 60 GB HARD drive.
    Am I wrong?

    One of my friends had a similar problem. The original internal HDD was not recognized by the BIOS. After a lengthy investigation, he set the BIOS to the default settings and restarted the laptop.

    This helped to recover the HARD drive

  • Satellite Pro C850 keyboard does not work properly and opens several programs

    My satellite pro C850 1HE keyboard intermittently stops working correctly, and begins to open programs, for example, by pressing F will open the file search, C open computer this kind of thing

    is there a permanent solution to this problem?

    This is not something to do with installed programs is not something to do with the browser settings.
    restarting the computer works in a short time, but that is a long time, it's really annoying because I use this for work and study!

    > is there a permanent solution to this problem?

    The question is what causes this problem? Is it related hardware or software related issue?

    Why n t connect a USB keyboard just to check if the same would happen?

    In case the USB keyboard would work fine, I guess that the internal keyboard failures and the solution would be a simple replacement of the defective part.

Maybe you are looking for

  • Car game no longer works after my iOS updated 9.3.2 to level today

    How can I fix? works for phones that have not upgraded to this version of iOS

  • Recent messages are unread

    Hi, recently me and my friends got problem on recent notification feature, it remains unread status even when we opened the message. The notification disappears only when I right click on it and select Mark as read manually. This is so embarrassing b

  • How to find syntax errors in TestStand?

    Hello I have about 70 sequences and I'll try to find syntax errors, that escapes my "radar of the error. How can I find these in TestStand motionless at each stage (which would be around 1000 measures and more!)? Miss me something like the 'syntax' c

  • How to get the form of Boolean control LED (round or square) in Labview 8.6?

    Well, it's pretty simple... Can be any kind of response, error, errors, Style ID anything. But I can't seem to find an answer. Help, please

  • Read MODBUS registers

    Hi all I have been more manuals/son using the Modbus Library to communicate through series. However, I'm not sure what exactly I am doing wrong. If I use a program like Modbus Poll and send 02 03 00 02 00 02 65 F8 I get a response: 02 03 04 39 20 90