Satellite Pro A300-1 has 8 error received trying to create Recovery Disk 2

Similar Questions

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• Satellite Pro A300 - 2C5 has stopped working

  Hello

  I have a problem with my Toshiba Pro A300 - 2C5.
  It stopped working today.

  I have paid a top tea but removed is as fast as possible but a little water got inside my laptop.
  He worked for a while, I turned off and it works again an hour later, but unfortunately it has stopped working.

  When I try to turn it on, the syptoms are as follows:
  -the only light that shines is a power indicator light
  -l' screen does not work at all (it stays black and went offshore)
  -fan works
  -It seems hard disk does not work if Windows does not start
  -the keyboard does not work, when I hit tke keys nothing happenes, I tested the Caps Lock key, but not flashing
  -computer does not read my camera memory card

  What shoul I do to get it working again? :(
  Any help appreciated.

  K.

  Hello

  The anomaly can be related to different laptop parts in the worst case the liquid spill damage the motherboard and you will need to replace the part.
  In the best cases, it could be a RAM error as it happens to one of my friends.
  He spilled coke on the keyboard and after awhile the laptop could not turn on.
  We checked memory sharp and replaced both modules with new RAM modules and this fixed the problem

  You can try this also maybe it helps if all other parts should be checked by a technician of the ASP.

• Satellite Pro A300 Touchpad has stopped working

  As the title suggests.

  My laptop is a Satelltie Pro A300 2 4.

  The Touchpad is not responding,

  I tried FN F9 - nothing happens.
  I tried pressing the upper left corner of the Touchpad - nothing happens.
  I tried to go to the mouse control panel and looking for an enable bit Touchpad cannot find the mouse set.

  The operating system is Windows 7

  Hello

  Have you tried to install the driver for the touchpad?
  You can find the driver for the touchpad on Toshiba UE driver page.

  Extra tip: in some cases possible to enable and disable the touchpad in the BIOS.
  Please check this!

  By the way: is an external USB mouse attached to the laptop? If so, unplug it and try to use the touchpad

• Re: Satellite Pro A210, stil does not start after you use the recovery disk

  Hi, my computer laptop girls stopped booting, I tried everything to fix this, but it seems to be on a loop.

  He runs the repair of your computer, but after a while, I get the message, this computer cannot repair this fault automatically (or something similar), there is also a message that says - if you have connected a camera or to this computer's portable music player, remove it now and restart.

  I tried to start in safe mode, safe mode with command prompt and last know good configuration but still no joy, so I eventually ran the recovery disc. Once it was finished, I was to square.

  Does anyone have an idea of what I can try next - other than to throw it out the nearest window.

  Thanks in advance.

  Hello

  Never heard talk of this error but sounds strange
  If I understood your first assignment; you were able to complete the installation of the OS from the recovery disc. Is this good?

  Well, in this case the HARD disk must be OK because the files were copied correctly

  I searched a bit in google and didn t have found a solution to 100%.
  Some have said that new OS install should solve this perhaps you could use clean up Windows Vista, Win XP disk

  You can also try to format the drive HARD integer first. Delete all partitions on the HARD drive, and then try again

  PS: You can check the HARD drive using the + Hitachi Drive Fitness Test. +
  Its free tool. You can find using google

• Satellite Pro A300 - how to install the webcam?

  I got my laptop via my uni so did amyn backup discs (especially not the webcam).

  Basically my laptop is a Trojan virus on my webcam, set it and I restarted my computer. It is then flashed up on reboot that I need to install my webcam but I don't have the disk and now I can't use my webcam! What should I do?

  PS I'm not a genius with computers so please be easy on me with the language.

  Hi mate,

  If you need to reinstall the driver for the webcam you can download on the Toshiba site and all drivers for your laptop:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I have too many Satellite Pro A300 and it s not delivered with the Toshiba Recovery disk because you create such a floppy yourself. So start the Toshiba recovery disc creator, which is preinstalled on your laptop and you can create this disk. It contains a picture of the factory settings, and so you can restore the entire system every time.

• Satellite Pro A300: How to recover the Vista operating system

  My friend has a Toshiba Satellite Pro A300 it has a 4 GB of ram, but on Windows Xp shows only 3 GB
  I also want to put in place the back of the Vista, but I can't not insatall any operating system (only the Toshiba Xp dvd)
  (there is a HDD recovery folder on the C drive, I think it is the Vista that he owned before but a don't know how to install it)

  Ok. If the folder in HARD drive recovery then it should be possible to carry out a procedure for HARD drive recovery, remain on the second partition.

  First of all, start Notepad and press F8 immediately after that the laptop has been powered. Then choose the first option called fix my computer.
  A new window should open, and you should choose the last option called Toshiba HDD Recovery.
  Then follow the instructions on the screen.

  This should usually works if the folder of HARD disk recovery and partition has not changed or deleted.

  Check it out if it does not, you will need to order a Vista of Toshiba Recovery DVD:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite Pro A300-28V - cannot create own recovery disks

  Have a portable Satellite Pro A300-28V with Vista Business 32. After a HARD disk recovery partition recovery, I decided to use the PC function full system backup to make a picture for later retrieval with all my current settings. Too inconvenient for factory reset default (Thunderbird 3.0 Mail, Open Office and some other small applications already running no problem for years on another computer in the office).

  The system needs 5 to 9 DVD and he wrote the first DVD. Takes about 30 minutes. Then, during the audit of this disc, it crashes. Audit bar stops at about 30% complete.
  Anyone with this experience? No, the company "Complete PC Image" works well on an OEM of Vista installation?
  Or maybe it's the DVD player in need of an update? I do not use a 3rd party burning software.

  / Sweden

  Hello

  What program you use to create your own recovery discs? For example, I mean Acronis, Norton Ghost, etc..

  In your case I would try with another program like Nero or CD Burner XP burning.
  In addition, you can try to remove upper and lower filters in the Windows registry, maybe that will work.

  Finally, and especially on the Toshiba site, you can check if there is an update to the firmware of your CD/DVD drive.

• Error device basic system for my Satellite Pro A300

  Laptop = Satellite Pro A300
  Platform = Visa PS2

  In my device manager, I have two errors.

  Under "Other devices", mean "Base system device".
  Under the heading hardware ID, one says:

  PCI VEN_1180 & DEV_0592 & SUBSYS_FF1C1179 & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_FF1C1179
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  The second says:
  PCI VEN_1180 & DEV_0843 & SUBSYS_FF1C1179 & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_FF1C1179
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  I believe it has something to do with my card reader.
  Can someone direct me to the right web site, use the drivers?

  Here's a nice page:
  http://www.PCIDatabase.com/

  You can find the details of PCI devices.
  FRI means seller
  DEV: device

  FRI 1180 = Ricoh
  DEV 0592 = Ricoh Memory Stick Controller

  So the case is clear: he controller s card reader.

  I recommend reinstalling the driver.

• Satellite Pro A300-28V - my bluescreens disappeared when the BIOS has been upgraded

  I'm curious to know about it. The machine is a Satellite Pro A300-28V with Vista32/Win7.
  Had problems with bluescreen dumps referring to 'iaStor.sys '. I was about to send the laptop in for repair when I made this last effort to resolve the problem. Upgrade 1.9 to 2 BIOS, 1 - Win.

  All of a sudden my system image succeeded! Even at an Iomega home network HDD. Without complex!
  No blue screen exports even at startup 'cold' (after a free night)!

  For now, I leave the computer in sleep mode while I am at work. Let's see if he managed a day without landfills.

  What is the technical difference between 1.9 and 2.1 BIOS? No idea if it's something with iaStor.sys to do?

  /ssstsg

  Spelling was edited by: ssstsg

  Hi mate

  This is really good news as your BSOD displeasured after the BIOS update.
  The BIOS give instructions to the test power - on self test (POST) and provide basic information on how to manage components of the laptop, as HDD, ODD memory, that are required to load the operating system.

  Who knows, what was changed in the update but the main thing is that all the work and the update solve your BSOD

  > No idea if she has something with iaStor.sys to do?
  iaStor.sys is part of the SATA driver who is required to recognize the HARD drive using AHCI mode.

• Satellite Pro A300-guest 1GT - error message when starting webcam

  I have a Toshiba Satellite Pro A300-guest 1GT. The problem is that the camera does not work. When I run the software, he writes that I have to restart camera or computer. I have Windows 7 and I have serched internet solutions but I find just a discusions with the same problem without solutions.

  Sory for bad English may.

  Hello

  Have you tried reinstalling the driver for the webcam? You can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Before installation: remove the driver current webcam and restart your computer. Try a registry cleaner like Ccleaner, then stop and try again. Now, you can install the latest driver for the webcam.

  I hope it works! :)

• Satellite Pro A300 - error - webcam driver open failed

  Hello

  I have the Satellite Pro A300
  The web cam stopped working after upgrading XP in Vista (webcam driver open fail.) Restart camera or computer)

  Any help

  Hello!

  I used the forum search and founded a good display of user Akuma.
  Maybe it's the s solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  Good luck!

  Good bye

• Satellite Pro A300-1 system restore has 8 Vista works not

  I wanted to use the system restore because of the attempt to reconfigure the administrator rights, its somehow deleted all my shortcuts on my menu and messed with a few things.

  However, when I try to use the system restore (I tried to use it in safemode, via cmd promp, bunch together and normal), but all seem to keep hanging in the same green page where you can read something in the sense of "system is initializing restore etc" (spend 45 minutes on this page until I get fed up and shut down the computer). I tried to use different restore points the same thing happens. He loves his work not at all.

  Can anyone help with this please?

  My laptop is a Satellite Pro A300-1 to 8.

  Hello

  You mean the Vista tool, which is located in (Start button-> all programs-> Accessories-> System Tools-> system restore) does not work and you cannot set back the Vista until the early time?

  Well, usually there's not much to do to restore the operating system to start time the point you have to play the System Restore tool and choose the restore point. Then everything should run automatically.
  If this doesn t work while something is messed up as you said in your ad above somehow deleted all your shortcuts in my menu and messed with a few things possibly operating system was messed in.

  Try to clean the operating system by using the freeware CCLeaner for example. I also use it. It s great. Repair and clean the operating system and check if it is possible to use the system again restore tool.

  I also found this MS page:
  [System Restore: frequently asked questions | http://windowshelp.microsoft.com/Windows/en-US/help/517d3b8e-3379-46c1-b479-05b30d6fb3f01033.mspx#EIEAC]

• Re: Satellite Pro A300 - 2C4 "Windows 7 Professional Upgrade DVD" upgrade

  We have a Satellite Pro A300 - 2C4 (bought on 23-11-09) that came with Vista Business 32-bit installed, but has been downgraded (using the provided diskette) to Windows XP due to the demands of corporate network.

  When Windows 7 became available, I bought the DVD to upgrade to Windows 7 Toshiba provided so that if the company decided to upgrade to the new operating system, we could do it on this laptop.

  That's what I tried recently to discover that we can't do as the DVD is for Win Vista upgrade Windows 7 Pro. What is the best way to upgrade without having to buy another drive to upgrade. I have a set of recovery disks for an another Toshiba SatellitePro A300 - 2 4 which was bought about 2 months before this one. These were created using the Toshiba recovery software before any changes have been made on the laprop. Would I be able to restore the system to its state of Windows Vista using these disks and then use the Windows 7 Professional Upgrade DVD to make the upgarde?

  Suggestions or recommendations would be greatly received.

  This upgrade package offered by Toshiba is upgraded from Vista to Win7. So if you want to use it, you must install Vista recovery image at first.

  After that, you can upgrade pre-installed Vista to Win7 following the Toshiba s implementation instructions.
  I did the same thing my Qosmio X 300.

  If you cannot use created recovery disc either s order Toshiba Vista recovery disk or (perhaps the best solution) install the clean version of Win7. A300 is fully supported for Win7 and you can download all the necessary drivers and tools specific to Toshiba and utilities.

• Satellite Pro A300 PSAG9E - unable to update firmware

  It has come to my attention that my laptop will not install updates of the firmware.
  I tried all updates firmware on the Web from Toshiba site and on-site support for other countries but still no luck.

  My laptop is a series of Satellite Pro A300 PSAG9E and when I try and install a firmware update a box telling me it's not compatible with my system.
  I checked the version proposed by the pdf file and I know that it is the basic version before the update, and I'm sure I have install the correct way of m.
  So I don't know what goes wrong.

  Does anyone else have this problem or knows something that could solve this problem? Because I'm at a total loss.

  Thank you

  Hello

  The European driver Toshiba page provides three firmware updates;

  _UPDATE for drive_ TS-L632
  + Changes have been made in order to correct the following: +.
  + Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed. +

  _UPDATE for drive TS-L632P TO02_
  + This firmware solves some problems in the optical disc drive. +

  _UPDATE for TS-L632H drive TO03_
  + This firmware solves some problems in the optical disc drive. +

  You have a TS-L632P and TS-L632H drive?
  Isn't it? Then you cannot update the firmware.