Satellite Pro A300 - 1DZ PSAG1E Vista - cannot get WLan to work

Similar Questions

• Satellite Pro T130 - 15 c - can't get Wlan to work using Win7 32 bit

  Hello

  hope someone can help me.

  I have a software that does not run under 64-bit. With the PC virtual a Virtual XP ist doesn't work too.
  The software needs a 32-bit system.

  So I bought Windows 7 32 bit and installed on the laptop.
  Everything works fine but not the WLan.
  I downloaded the drivers Realtek Toshiba Site (they are for Win 7, 32 and 64-bit) to install it.
  In system view, drivers seem to be installed on the right.

  But if I want to search of WLan only shon there a mistake. But no error number. He only written ist: unexpected error
  and a clue: maybe it's the drivers.

  The original Realtek drivers helps too. The same problem.

  No one knows the problem or how it works?
  Sorry for my bad English, I'm a long time out of use.

  Thanks for help
  Gerd.Reiss

  Hello

  Your laptop supports WiFi Realtek RTL8191SE 802.11bgn chip.
  Here you can find the latest version of the driver:
  http://APS2.toshiba-tro.de/WLAN/

  Please note that you must activate the Wlan first by using the FN + F6 key combination.

  I read in some forums on issues of Wlan and in many cases, the BIOS must be updated.
  Check if the BIOS is updated. If a newer version is available; update the BIOS.

  Welcome them

• Satellite Pro A300-1DZ cannot find HDD after BIOS update

  Hello world

  I recently bought a Satellite Pro A300-1DZ flea market.
  Put a new copy of Windows xp family.
  I then install all the drivers necessary own site of Toshiba and the end of it, I thought that it is perhaps a good idea to update the bios?

  OH DEAR what a big mistake.

  Now the netbook won't start windows.
  So I thought it's ok, I'll just start from the begginning and reinstall windows again, but he tells me that it cannot find a hard drive on my netbook?

  aaaaaaaaaaaaaaahhhhhhhhhhhhhhh, I'm going crazy,
  Could someone tell me please how to fix this? Thanks x

  Hello

  I think the value of the option SATA AHCI and hence Windows XP mode cannot find the HARD drive.
  It's because of the SATA controller.
  You can set the SATA AHCI compatible mode mode mode and this will allow you to install Win XP on the laptop without the use of SATA drivers.

  So, you have two options if you want to install Win XP:

  -> AHCI mode, but you must include the SATA drivers
  Compatible mode-> Win XP installation possible without SATA drivers

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• Re: Satellite Pro A300-1DZ - this is where to build in microphone?

  The model is Satellite Pro A300-1DZ, Vista Business.

  In the recording devices-"no microphone not plugged" reinstalled drivers - no change.
  When I plug in an external microphone, it works.

  I opened the laptop, can't see a microphone inside...
  * Is it built in microphone on this model at all? *

  > Is built it mic on this model at all?

  I'm not the owner of the a300s, but according to the [Product Specification | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1055624] there is no built-in microphone

• Error 0 x 0 standby power on my Satellite Pro A300-1dz

  Hi all

  I managed to install Windows XP Home edition on my pro A300. and I put a lot of pilots needed back on the system ect, but I have a problem with powersaver one can't seem to make it work properly, I just get an error a bit like the one on this page, if it works: http://www.geekstogo.com/forum/Toshiba-Power-Saver-Problems-t87338.html

  The small window with error 0x0.
  I read somewhere that I need the common modules installed before installing all the drivers of tosh, (I don't have a tosh boot CD)

  I installed my wxp cd, that I bought off ebay, that windows has been altered by the virus and downloaded all the drivers from this site, so my computer is running fine, better even, but the night before does not work.
  How can I change this?
  Can I download the offline installation cd, not questionable torrent site, or is it on this site somewhere under my nose.

  Thank you, I'm moving.

  Jeff

  Hello

  First you must install the common Modules before installing other Toshiba tools or drivers. The common Modules are required to make the other Toshiba programs work correctly.

  In addition, it would be interesting to know what error message you get exactly Toshiba Power Saver. You can add this information please?

  In your case, I would like to uninstall Toshiba Power Saver. Then install the common Modules First, then other tools of Toshiba.
  After you install Windows XP on my laptop, I used the following installation for Toshiba tools order but noted that all pilots as screen, sound, etc. should be installed first:
  Windows XP SP3
  All the drivers
  TOSHIBA common modules
  TOSHIBA Hotkey Utility
  TOSHIBA Touchpad POWER
  TOSHIBA utilities
  TOSHIBA Power Saver
  TOSHIBA Assist

  The Toshiba recovery disc can t be downloaded. As far as I know this laptop is normally delivered with Windows Vista and this is why you must create a recovery disc yourself that you can read in the user's manual.
  But now it s too late and you have new disc order from Toshiba direct.

• Satellite Pro L20 - cannot get WLAN to work

  Hello

  I have problems with my Satellite Pro L20 after a reinstallation. The wifi does not work.
  I installed the right driver, but have had no luck.
  Anyone with the same problem?

  Any help would be great

  You reinstall your laptop computer with the recovery disc or Microsoft?

  Do you have which driver installed?
  You must use the driver from the Web from Toshiba site. Check again:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Perhaps a BIOS might also solve the problem.

• Satellite Pro L300 will not start - cannot get into the BIOS

  Dear,

  I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

  Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
  In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

  Help, please.

  > stop boot on Toshiba logo process
  This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

  Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
  It is possible that one of the RAM modules is defective

  It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

• Satellite Pro A120: After upgrade Vista control volume does not work

  Hello, can help them.

  I have a satellite Pro A120, and because I used the upgrade disk to upgrade to Vista, I was not able to control the volume button on roller on the front of my laptop.

  I see that someone has posted a repsonce for someone who uses an A100 series, but value added package for the A120 doesn't include this utility.

  Thank you

  David

  Discovered since I posted this question, by downloading the latest sound card driver, I can now control my sound on the roll switch on the front of the machine, but there is no display appears on the screen, as he did with XP.

• Satellite Pro L40 with realtek card: cannot see wlan Vista networks

  Hey

  You just bought the L40 (Realtek card) and it cannot see wireless networks. The diagnosis of Vista, is that the wireless adapter must be turned on. Then, it will fail to start. Function key and F8 (wireless on/off switch) does nothing.

  The wireless router is well - connected to an XP machine. I can connect to the router without a problem by using an ethernet cable.

  Running on the latest Microsoft drivers.

  Pointers much appreciated.

  Thank you
  Frank

  Hello

  you turned on the wireless the case switch on "ON"? Maybe you forgot this one, and this is perhaps the reason why it won´t work.

  Please check and make sure that you then use the FN + F8 switch.

  Would appreciate your comments on this...

  Welcome them

• Satellite Pro A300 - after sleep mode the mouse no longer works

  Hi all

  Hope you can help me with this problem because I believe that I have tried everything I know and my next step is really formatting all the computer again and again without knowing if it will work this time, because that's what I just did, during the upgrade to win 7.

  I have 2 problems:

  When the computer goes into sleep mode and I start it backup - the mouse stops working, unless I have move to another usb port. I get a message on usb can run faster...

  Another problem is a program of freezing at this point as well, this program is Oracle JDeveloper, don't know if that has to do any?

  I tried to update ALL the drivers of toshibas webpage - these problems still...

  Help, please!

  Would rather not format again...!

  Christian

  Hello

  Can you please tell us which version of Windows 7, you have installed? I mean if you have 32-bit or 64-bit.

  Is it just that you use an external mouse?
  The touchpad works after sleep mode? If so I think that it s something wrong with the external mouse maybe.

  By the way: make sure that you use the latest version of the BIOS. You can find it on the page of Toshiba.

  And as for the question of the Oracle, I think you should communicate directly with Oracle support. ;)

• Satellite Pro A300-28V - cannot create own recovery disks

  Have a portable Satellite Pro A300-28V with Vista Business 32. After a HARD disk recovery partition recovery, I decided to use the PC function full system backup to make a picture for later retrieval with all my current settings. Too inconvenient for factory reset default (Thunderbird 3.0 Mail, Open Office and some other small applications already running no problem for years on another computer in the office).

  The system needs 5 to 9 DVD and he wrote the first DVD. Takes about 30 minutes. Then, during the audit of this disc, it crashes. Audit bar stops at about 30% complete.
  Anyone with this experience? No, the company "Complete PC Image" works well on an OEM of Vista installation?
  Or maybe it's the DVD player in need of an update? I do not use a 3rd party burning software.

  / Sweden

  Hello

  What program you use to create your own recovery discs? For example, I mean Acronis, Norton Ghost, etc..

  In your case I would try with another program like Nero or CD Burner XP burning.
  In addition, you can try to remove upper and lower filters in the Windows registry, maybe that will work.

  Finally, and especially on the Toshiba site, you can check if there is an update to the firmware of your CD/DVD drive.

• Satellite Pro A300 - how to get the sound on the TV with VGA cable?

  Hello world

  I have a real problem connecting my Satellite Pro A300 to my Samsung HDTV.
  The video works fine - I used a VGA connection on the laptop and the TV.

  The problem I have is healthy.
  I want the sound either also come from the TV. I tried a jack of 3.5 m from the headphone jack of the laptop to a red and white connection RCA audio on the TV, but it doesn't seem to work.

  Does anyone have any ideas or advice?
  I need of additional drivers, etc., or do some settings need to be changed etc etc.

  Hello

  Normally, to use the 3.5 mm jack plug in the headphones, you need an adapter cable.
  At one end, it has a 3.5 mm jack and the other side to connect red and white audio RCA connections.
  Here is an example of what I mean:
  http://www.optimization-world.com/IMG/prod/3_5_mm_rca_audio.jpg

  I m using such an adapter without any problem. You n t need an additional driver, or something more. It's the same as if you were using a helmet. :)

• Satellite Pro A300 PSAG9E - Win 8 upgrade questions

  I decided to update my old Toshiba Satellite Pro A300 PSAG9E-00700TTE Vista to Windows 8.

  After two tries he has been successful. Vista made me mad, and when I decided to give my son, I wanted to work better.

  Toshiba doesn't seem to be willing to support the old models. (over 3 years).

  I can not even find this model code in the lists, the site does not seem to recognize the serial number.

  This is why all the Windows 8 upgrade tools provided are not relevant.

  I met a few minor problems before, but the Toshiba Turkey never replied messages, even those concerning the new products when I considered buying a new laptop. In the end I went for an Asus, which exceeds my expectations.

  I don't expect all support this time either, because of past experience. But I still want to try one last time.

  Is there a way to get the material in this workbook in Windows 8?

  > Is there a way to get the material in this workbook in Windows 8?

  Satellite Pro A300 is not that win 8 supported means that you will not find to win 8 drivers for this series, but of course, you can use Win 8 on this unit.

  In some cases, the municipality of Win 7 drivers would be compatible.

  Toshiba tools like VAP (value added package) to win 8 can also be used, but we must look for a Win 8 VAP released for other more recent models.

  Touchpad driver can be downloaded from the page of the Synaptics driver also other drivers like LAN or WLan can be found on chip manufacturer pages.

• FN keys do not work on my Satellite Pro A300

  I have a Satellite Pro A300 with Windows Vista business, and some of my FN stop working.
  I have tried to re - install the package of added value, but it changed nothing.

  Can someone help me?
  Thank you

  Hello

  Not quite sure, why some of your FN buttons stopped working, but the fact is that utility support memory card Flash controls the FN keys and you should try to restart Flash cards first.

  Select all programs-> Toshiba-> Flash cards, and then restart the tool.

  Also go to Control Panel - tools and performance Information - adjust Visual effects

  Here the function "Use Visual styles on windows and buttons" option on the bottom must be enabled to allow the Flashcards software work