Satellite Pro A300-1LG - cannot enter the BIOS settings

For some time when I turn the notebook on the page where it appears the Toshiba logo are not displayed and I can't get into the BIOS.

And put back two or three times and then reappear details.

I tried to reinstall the BIOS, but the BIOS installation tells me that the version I installed is the existing one.

Do you have any suggestions?

+ The message was edited: assignment has been translated.

*@manona*
Please post in English. This is a user to user community where the English language is required!

(* 1) * my knowledge the CMOS battery is soldered to the motherboard and cannot be replaced like for example on desktop PC
(* 2) * remove the CMOS battery would NOT reset the BIOS nor would be to remove the passwords.

If I understand your problem, you are not able to access the BIOS, but you can start the laptop and the system. Is this correct?

You have a kind of password (user / supervisor password?)

Tags: Toshiba

Similar Questions

  • Satellite P50T-A01C - how to enter the BIOS settings?

    Can someone tell me please how to enter the bios on the Satellite P50T-A01C
    I tried fn f2, f10, delete, not go...

    Does anyone know how to get?

    Thanks in advance.

    If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
    Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Try to please and post comments.

  • Satellite L310 - I can not enter the Bios settings

    Dear team,

    I have a toshiba that is always on warraty.
    Is there anyway you can help me.

    It ceased to operate effectively. It does not exceed the Bios.
    By that I mean you reach the Bios screen, but you can not enter the Bios settings.

    Details
    model: toshiba Satellite L310

    What exactly do you say: you reach the Bios screen, but you can not enter the Bios settings?
    The BIOS is secured by password or what?
    You see a splash screen of Toshiba for short time?
    Is it possible to start the Windows operating system or to recover the laptop?

    Please publish more details!

  • Satellite Pro A300-257 while flashing the BIOS

    Hello

    I have a dilemma. I recently installed windows 7 on my laptop of girlfriends who is a Toshiba Satellite Pro A300-257, everything went well until I tried to update the Bios. I followed all instructions on the toshiba site had to put the model number in to get good bios double checked and triple checked before running the program, but when I ran the system crashed to halfway through the closed system update and now it wont even boot lights are on cd player is ROAR a few stays on black screen.

    I read many forums and it seems im not the only one with this problem.
    I just got the phone to toshiba and they say im not covered because I does not you can call and go through it with them on the phone, even if at no time did he tell me to do that I followed the instructions of there Web site.
    I also confirmed with them that I used the correct bios but they say that they are unable to prove that and I can put in the wrong information that I did not.

    In my view, there is a program that will allow me to boot from the cd so I don't have to go out and buy a reader external floppy to Flash the bios, I think that his winflash. Unfortunately, all I can find is the executable program on there website which im guessing will not start work.
    Anyone know where I can find the prog to update the bios and the bios file so I can create a cd bootable to Flash the bios.

    Any help will be appreciated with gratitude

    Thank you very much

    Hi mate

    I m afraid there is no alternative to reflash the BIOS to the traditional version of BIOS who can start the BIOS updated using an external USB drive and the floppy disk.

    The European driver Toshiba page contains only the BIOS Win-based that can be updated when the windows operating system. The traditional BIOS is not available for download. Only authorized service partners have access to this version of BIOS and that's why I don t see any alternative as to get in touch with the guys and to ask for help.

  • Satellite Pro A300-1E7 - cannot start the cam software

    I bought the Satellite Pro A300-1E7.
    Webcam does not work in MSN messenger video call.
    Will have problems similar to the previous posting, except that I use Zonealarm.

    I think that Zonealarm has disputed cec_main.exe in a similar way.
    I tried to follow the instructions here, but without much success.
    I removed the Camera Assistant SOftware and re-installed the driver but does not seem to have improved things.
    Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.

    Any ideas please?

    Hello

    I used the Zonealarm happened and I was not really satisfied, because this software locked everything and most of the applications didn't work properly even after the new configuration! Finally, I removed this software and I noticed more advantage. my laptop starts much faster!
    I think this software would lock the cam software too.

    > Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.
    This means that the software has been removed and is not installed correctly.
    But to be sure, check in Control Panel-> Software (Add & Remove Programs) if the webcam is installed.

    I have the internal cam of Chicony too and it s works well as part of the software Skype. I didn't test t MSN but I don t see serious reasons why it shouldn't t work.

    In my view, you must first remove the zonealarm. Then clean the OS using CCleaner. Finally, redownload the webcam software and reinstall it!

    The toolbar of the webcam is not always visible on the desktop.
    It seems that if you move it the mouse cursor to the place where the webcam tool bar was hidden.

  • Satellite Pro A40 - how to enter the BIOS

    I can get to safe mode, last known good configuration, but I forgot how to get BIOS. Please notify for the satellite Pro A40

    What and press ESC F1 immediately after power on

  • Satellite Pro A300-1NT - update of the BIOS has not

    Hi, I'm an island here can someone help me solve this problem without sending it to the workshop of maintenance if possible.

    I've just updated tempro informed me a bios update. I ran the update, but it froze completely the system (Vista). I waited 15 minutes to show no sign of life (flashing lights or unlocking system) and then I turned it off thinking the thing crashed. Now, it won't turn.

    Is there a way to fix this? As it is turned on, it checks the cd player, can be resolved by updating the bios from a cd? Or a flash key?

    Help please :(

    Unfortunately, a botched BIOS update cannot be solved only by an authorized Toshiba dealer.

    Richard S.

  • Satellite Pro 2100: How to enter the BIOS?

    Hello
    I have a sat 2100 pro, I find nothing in the manual on the subject to get into the bios, I have tried a few F keys but without success, what am I doing wrong? How to do in the bios?, as I get a beep sharp inside the computer laptop beeeeep, what is this? its not an overheating?

    Thanks for your time.

    Try the ESC and then F1

  • Satellite L750D - cannot enter the BIOS settings

    Hello

    I have some problems with the BIOS on my L750D.
    When I press power button / stop it is no Toshiba logo and I couldn't get to the BIOS Setup because it starts Windows, even when I press DEL or F2 or any other key.

    Any help?

    You may have turned on option quick start?

  • Satellite A40-151: how to enter the BIOS settings?

    Hello...

    I'm on Toshiba Satellite A40-151 the DVD for this broken but this isn't worth it.
    The problem is that I can't enter the setup (BIOS) to boot from a different boot device, or I do not now how to enter.

    Help, please

    thanx

    Hello

    I think you have a Toshiba BIOS.
    In this case you must press the ESC key immediately after the laptop has been powered. Try to press the button several times

    By the way; You can also use the F12 key to get the boot menu.
    Then you could easily choose your boot device
    This also works

    Good bye

  • Re: Satellite Pro A200 - black screen after the BIOS screen

    Hello
    I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

    My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
    I can access the toshiba Setup screen but not the installation of security mode.

    Kind regards

    Hello

    You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

    If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

    Check this box!

  • Satellite Pro A300 freezes when on the internet

    Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

    Hello

    have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
    It is especially the driver, software problem.

  • Satellite L755-129 and Win8.1 - cannot access the BIOS settings

    Hello

    I have a L755-129 satellite and I have the version of windows 8.1 update in my laptop. I want to open the bios of my computer and I can't do it?

    What is going on? Also I can't find in the windows recovery Panel. Key F2 and F12 does not work, when I press it, the laptop starts beeping beep and starts in windows.
    Can someone help me? I don't want windows 7 I like windows 8.1.

    Thank you for your help

    It's really good that you posted this question. So far on this forum many people ask the same questions, but all have been at the origin of new machines of Win8.
    Now we have the situation with the old machine Win7 but with Win8 preinstalled.

    Solution for other people needed to proceed to a complete stop and after doing this, it was possible to enter the BIOS settings. Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

    This situation does not for me so here's a question for you:
    When you start your laptop, I guess you can see the Toshiba start screen. With F2 option is shown on the bottom of the screen?

  • Satellite C55 - A - 19(d) - how to enter the BIOS settings?

    Hello

    I recently bought a * laptop Satellite A-C55-19 D * with no operating system preinstalled, so I installed Windows 8.1.
    My problem is that * I can't get to the BIOS menu *.
    I turn on the computer, but I can't see any invitation to "press F2 to enter setup". I get only a screen that has just the + Toshiba Leading Innovation > + notice, then the Windows 8 points of spinning...
    I could type or hold F2, F12, ESC, DEL, but nothing is coming. I also tried to press the Fn + F2 key combination.
    What I have to enter the BIOS setup?

    Thanks in advance!

    Proceed to a complete stop as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    After that restart your laptop, and then press F12. There you should be able to enter the BIOS settings.

    Check it out.

  • Satellite Pro A300 - upgrade RAM of the former model A200

    Hello

    I need an advice. I just took a memory (Samsung) 1 GB of more old model Satellite A200 module and put it on my new model Satellite Pro A300. Here is the information about the SPD:

    _Original (which has been installed in the factory): _

    DIMM1: Kingston (2 GB DDR2-667 DDR2 SDRAM)
    Manufacture Date week 20 / 2009
    @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
    @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
    @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

    _From old Toshiba Satellite A200: _

    DIMM3: Samsung M4 70T2953EZ3-CE6
    Manufacture Date week 42 / 2007
    @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
    @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-28-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
    @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-21-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

    According to the information provided was it a good or bad idea? I mean differences in the SPD and will this performance, stability, etc. ?

    Thanks a lot for your time!

    Hi xosman,

    According to the information that you have posted it seems that the other Satellite A200 module has the same specifications, so if your laptop works with this module it s no problem I think.

    Satellite A200 A300 using the same memory modules DDR2 so change the RAM is no problem.

Maybe you are looking for