Satellite Pro A300 - 2C5 has stopped working

Similar Questions

• Satellite Pro A300 Touchpad has stopped working

  As the title suggests.

  My laptop is a Satelltie Pro A300 2 4.

  The Touchpad is not responding,

  I tried FN F9 - nothing happens.
  I tried pressing the upper left corner of the Touchpad - nothing happens.
  I tried to go to the mouse control panel and looking for an enable bit Touchpad cannot find the mouse set.

  The operating system is Windows 7

  Hello

  Have you tried to install the driver for the touchpad?
  You can find the driver for the touchpad on Toshiba UE driver page.

  Extra tip: in some cases possible to enable and disable the touchpad in the BIOS.
  Please check this!

  By the way: is an external USB mouse attached to the laptop? If so, unplug it and try to use the touchpad

• Satellite Pro M70 - wireless has stopped working

  I have a Satellite Pro M70 and the wireless stopped working. The yellow light lights up for a few seconds for the machine to wake up but then turns off. I rebooted several times, but that did not help. In your reply please clarify abbreviations - thank you!

  Post edited by: boston1

  Hello!

  Have you tried to update the driver WLAN? You can find it on the Toshiba site or portal driver WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  Have you checked for yellow exclamation marks Device Manager?

  Check if the laptop WLAN switch lights up and I can disable/enable WLAN with FN + F9 on my Satellite phone.
  Check it!

  Good bye

• Satellite Pro 6100: fan has stopped working

  I recently decided to copy out all my data from my laptop and it just stopped. It was very very hot, and the hard drive has not worked since. I put a new disc in and installed the software but it heats up really fast. My question is this all a result of the fan (I can't hear more) stop and is it possible to buy a fan and install it myself - I've already cracked it open and got down to the fan and it looks like dust-free. I am pretty handy and want to do it myself.

  If the fan is originally where can I buy a replacement?

  Hello

  This looks like a laptop computer could overheat.
  If you can't hear the fan or cooling module is bad or there is something wrong with the motherboard.

  In my opinion, the cooling module must be checked and possibly replaced.
  All parts and devices can be controlled from the maintainer authorized Toshiba in your country.

  Just call the guys and order the compatible part or if you have no experience, ask the guy to help him. I think that you should not replace anything by yourself. It may be damaged anything else. The technicians have more experience and can locate and solve the problem much faster.

  Good luck

• On Satellite Pro P300 touchpad has stopped working

  Hello.

  I have a Satellite Pro P300 equipped of Vista and the scrolling feature broke on my machane too.
  I also lost the touchpad icon in my taskbar and function to configure the touchpad.

  I've uninstalled and reinstalled the drivers, nothing works.

  If I had more hair, I would probably be pulling it. Help, please.

  Thank you

  Hello

  What drivers you have reinstalled exactly? Normally, you can download all the drivers from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Have you tested the scrolling feature using an external mouse?

• Re: Satellite L850/046 - keyboard has stopped working

  The laptop Toshiba Satellite L850/046 - keyboard has stopped working.
  Have restarted. In the box of charms, it seems ghost.

  Impossible to restore or reset as it asks password and keyboard does not work

  Hello Graham

  Sorry, but your problem is not easy to understand. After reading these two sentences, it is not easy to tell if there is a general problem with the keyboard or what.
  When you enter the BIOS settings can use keyboard to scroll through the options and tabs of the BIOS?

  Since when did you notice this problem?
  You have created a recovery media? If Yes, please try to use it and install original recovery image.

• I bought acrobat 9 pro. It has stopped working, and I don't have the license number or serial number. How can I fix it?

  I bought acrobat 9 pro. It has stopped working, and I don't have the license number or serial number. How can I fix it?

  Hi Max,.

  Please visit the following link to get your serial number.

  https://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  Concerning

  Sukrit diallo

• Adobe first Pro CC2014 20141 has stopped working

  Whenever I try to launch the program this message 'Adobe Premiere Pro CC 20141 has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is not available"I tried to uninstall and re install the program like 2 or 3 times already, can't find anything on the Internet can help me either. Please if you have any suggestions made me know.

  Here is a screenshot.

  Hello

  Can you please check if you have Service Pack 1 installed for Windows or not. My guess is that it is the first cause of crash.

  Concerning

  Dorin

• Satellite T130: integrated webcam has stopped working

  Hi, I have the same problem of the bellows of the question, as I looked around and I was not able to find the answer I need.
  I have a Satellite T130 and, suddenly, the integrated webcam has stopped working properly. A blue light is on, but there is no picture. What can I do?
  Thank you

  Hi mate

  I have the same problem, sometimes using my U400.
  This happens if the room is dark for the camera.
  If something like this happens to you that I recommend that you keep your finger in front of the webcam for a short period.
  After that, the image of the webcam should come back again in my case it worked.

• Satellite Pro A300 - CD/DVD drive works sporadically

  Hello

  I have a Toshiba Satellite Pro A300 PSAG9E, which was just bought recently. However, I noticed that the DVD - RW drive (or not) sometimes, work at the start of the laptop. I have no idea why this inconsistency occurs!

  Can anyone help with this?

  Thank you
  Jay

  Hello

  > I noticed however that the reader of DVD - RW (or not) sometimes, work at the start of the laptop

  What do you mean sometimes does not work? Do you say, Autoplay, or something else?

  Post edited by: Jeka-HE

• Satellite Pro A300 - Webcam does not work in Windows live messenger

  Recently bought a Satellite Pro A300, with integrated webcam. However, when I try to use the webcam in Windows live messenger it comes up with the following error messages.

  * "We couldn't start your camera. Please check that your camera is not currently being used by another program, and then try again. » *

  Also this message...

  * "Messenger is not available right now. Please try again later. (0x82000009). "

  Now, the camera is not enabled, and Messenger works normally.

  * HELP! *

  Thank you

  Folic

  When you get the message if another program uses always the camera.

  So, try to disable the webcam software and other e-mail programs in msconfig.
  Restart the laptop and if you want to use the webcam software you need to start the first webcam software.

• Satellite U300-130 - TosBtMng has stopped working after installing Nokia PC Suite

  I have the same problem too... with Toshiba Satellite U300-130.

  Bluetooth worked well enough before I installed the Nokia PC Suite for my mobile on my PC (new version 7.1.26.0 Web site).

  To be correct, as a first step, I even managed to maintain a connection between the PC and the Nokia Bluetooth and ran the synchronization of the contacts. I tried several times, but each time synchronization run ended with the message "PC couldn't get response from your Nokia.

  After the reboot, my PC went crazy and started broadcasting the message "TosBtMng has stopped working" and it restarted every time that I ask him to close.

  Installation of the new version of BT Stack (6.40) does not resolve this error.

  Help, please

  I also use Toshiba Satellite, I use this [suite Nokia pc | http://www.softsea.com/review/Nokia-PC-Suite.html] version

• P50 win 10 Pro - footprints digital has stopped working

  Hi all

  I just got my P50 (20EQS00600, M1000M, i7-6700HQ, 16 GB of RAM, 512 GB SSD) about a week ago and I quite like it. However, there is one thing that drives me crazy: after that I upgraded to Win 7 Pro 64 bit for win 10 Pro, the fingerprint feature has stopped working. This issue seems to be related to those reported in these two threads for the P70, but at the same time appears sufficiently different to warrant a new post:

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/P70-fingerprint-software-issue/m-p/22517...

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/fingerprint-and-sound-problems-P70/TD-p/...

  So, here is what I did:

  (1) I correctly installed Win 10 w/o retaining data/settings from the previous installation of Windows 7; I even reformatted the SSD drive.

  (2) for the initial installation, was asked by Windows Hello register prints I've done.

  (3) fingerprint worked during the first connection, but then disappeared as if by magic. Hello Windows is no longer appears as a connection option in the control panel of Win.

  (4) I found in Device Manager the Synaptics WBDI reported the following problem: "this device cannot start. (Code 10) ".

  (5) repeated uninstall and reinstall drivers are without success. I tried both have Win a driver and manual to install the drivers I downloaded from Lenovo page.

  (6) when I uninstalled the drivers and then wiped the fingerprints stored in the BIOS, I was again able to register fingerprints with Windows Hello. However, this time the fingerprints were not yet registered in Windows, and I had to cancel the procedure. Immediately after, the Synaptics driver stopped working, cf. 4).

  I am at a loss what to do. Strange thing is that I ran Win 7 for about a week, and the fingerprint reader worked fine all the time. (Due to the scaling of the questions on my 4 k screen, I bit the bullet and went to win 10, in case you're wondering.)

  So everyone out there has the same problem, does anyone have a solution?

  Thank you in advance and the best,

  A

  
  

• Satellite Pro M70 - cooling fan stopped working

  Hello

  I have a laptop M70, I have recently identified as not very hot when in use. I have now identified that the fan has stopped working.

  Any ideas how I can get this fan, so I give it a clean and check that the connected fan isn't loose etc.?

  Thank you

  Are you sure that your cooling module has stopped working 100%?
  Maybe the cooling module is ok but cannot run with maximum performance and can not cool the CPU correctly because of the dust and debris inside the laptop?
  What do you think of this theory?

  I can tell you that I read a lot of stories and gossip on overheating problems and be more honest to these issues could be solved by cleaning fans.

  I clean my cooling fans from time to time with a jet of compressed air.
  These sprays are professional tools and can be purchased in most dealers specialized computers.

  But if the fan has stopped working and then a jet of compressed air will not help you.
  In this case, a technician must check the laptop.

  Maybe the laptop must completely disassemble to remove and replace the defective part.
  This procedure is really tricky and must be performed by a technician for laptop.

  Good luck buddy

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?