Satellite PRO A300 BIOS update process: TEMPRO asks to update again

Similar Questions

• Satellite Pro A300-1NT - update of the BIOS has not

  Hi, I'm an island here can someone help me solve this problem without sending it to the workshop of maintenance if possible.

  I've just updated tempro informed me a bios update. I ran the update, but it froze completely the system (Vista). I waited 15 minutes to show no sign of life (flashing lights or unlocking system) and then I turned it off thinking the thing crashed. Now, it won't turn.

  Is there a way to fix this? As it is turned on, it checks the cd player, can be resolved by updating the bios from a cd? Or a flash key?

  Help please :(

  Unfortunately, a botched BIOS update cannot be solved only by an authorized Toshiba dealer.

  Richard S.

• Satellite Pro U400 - BIOS update gone bad

  Hi all!

  I've updated the BIOS on my laptop and something was wrong, just not now a computer screen.

  I went to see the Web for Chris Bios recover.
  Have over 20 versions, but so far without success.

  My biggest problem is: I can't save on floppy disk 2 MB BIOS. All attempts to create a
  Flash or SD ended in failure.

  The laptop is: Satellite pro U400 PSU45E

  Please help me... the laptop reads the floppy in BIOS with little experience (the ones that come with Chris Bios 500Ko - 1000 KB) begins with a normal boot beep signals supposedly provided a definition blocks then baar times short beep and nothing to do...
  There must be something... BIOS BACK small size, emulator USB... BIOS to be torn down, so it is possible in charge from USB, SD...

  Every idea can be useful!

  Thank you very much

  Excuse my English

  f the subject isn't here, please redirect mderatora
  This is my 1 post here

  Hi mate

  Unfortunately if something was wrong during the update of the BIOS, then you won't be able to solve this problem without the help of a technician of the ASP

  I hope that the ROM BIOS module is not too bad
  In the worst case that the mobo is damage but maybe it s not damaged

  However. You must contact a local ASP and must ask for the manipulation of the Fryer!

  Good luck!

• Satellite Pro L300 BIOS update problem

  Hello

  I have a Satellite Pro L300 (PSLBHE).
  I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
  What is the problem? What can I do? Please help me.

  Gjon

  It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
  What can you do now?
  Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.

• Satellite Pro L40: Bios update not necessary - no settings for RAM in Bios 1.90

  Hi, I just bought a Satellite Pro L40 laptop and im trying to figure out why the bios has no parameter memory.
  If I look at the ram using a tool of information system (cpuz or aida320), it shows she doesn't move at the speed of 667 mhz but at 533 mhz.

  As you can see from this screenshot the memory runs at the real speed is less than the maximum that the sticks have a rated power.

  http://img135.imageshack.us/img135/4580/cpuz1pj5.jpg

  Its running at 266 mhz (533 mhz ddr) where it should be run at 333 mhz (667 mhz ddr).

  I also noticed that with this laptop fan never seems to come, is it possible to mount the fan?
  Whenever I have the laptop for more than 30 minutes, it becomes very hot.

  Hello

  > if I look at the ram using a tool of information system (cpuz or aida320) it shows that it does not run at the speed of 667 mhz but at 533 mhz.

  What is your FSB?
  If the laptop was equipped with memory PC2-5300 modules then they could run at 667 MHz, but only if the FSB would supports 667 MHz! I think is supported by the FSB of 533 Mhz.
  So I can't say it s nothing wrong!

  > I just bought a Satellite Pro L40 laptop and im trying to figure out why the bios has no parameter memory.
  Why do you think a BIOS update would turn the memory settings in the BIOS?
  Please don t mix of desktop computers laptops! Laptops cannot be overclocked.
  BIOS of laptop computers is not the same thing as a desktop PC BIOS!

  > I also noticed that with this computer laptop fan never seems to come, is there a way to turn the fan to the top? Whenever I have the laptop for more than 30 minutes, it becomes very hot.
  Have you noticed all automatically turn off downs or any other strange behaviors laptop as freezing OS for example?
  If it is then that the laptop runs correctly and doesn't overheat.
  Books to support thermal protection which would be closed the laptop automatically to avoid equipment damage

  Then lean back man and enjoy your nice toy ;)

  PS: you are fan of Carlos Santana? ;) I ask through your nickname ;)

• Satellite Pro M30 Bios Update

  Hello

  I have a satellite pro m30 and I would like to make a bios update. Utility hardware Toshiba says that my bios version is 1.4. The existing updates see 1.2, 1.6, but it says nothing about 1.4.

  Should I take 1.6?

  Any help?

  Thank you

  Hello

  It might be possible that the BIOS version 1.4 is the version of BIOS default manufacturer for this model.

  In my opinion you should take the 1.6 version because it is the most recent and it may be necessary!

  Here is the link: http://eu.computers.toshiba-europe.com
  go to Support & Download - Download BIOS - choose your M30 SP and click for the Description of BIOS for more information!

  Bye Bob

• Satellite Pro P100: Bios Update went wrong - what to do?

  Hello
  I have a satellite pro p100 with win xp.
  I downloaded the bios-update victory.
  something is worng. the laptop was closed and when I try to start it,
  I blackscreen, do not see anything, windows does not start.
  nothing happens.

  Please help me, I write my degree and really need to resolve this problem quickly.
  thanx

  Hello

  so if your machine does not start then you need to send/bring your machine to the next partner service authorized in your country.

  Here´s a link to find one and I suggest you to contact one of them immediately because of your degree:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  Good bye

• Satellite Pro U300 BIOS update BACK

  Anyone know if I can upgrade the BIOS of my Satellite Pro u300 from a floppy boot BACK, or another way to do an update without Windows? The downloaded utility seems to work only in Windows, I do not use.

  I tried to launch a live Windows CD (BartPE and Ultimate boot CD) but it does not start or shows no graphics.

  I have problems with some hardware and hopes that an update of the BIOS.

  Thank you.

  No, you can not day BACK because Toshiba driver BIOS European page provides only the version of the BIOS win.

  For an update of the BIOS BACK you would need an update of the special BIOS that is not published on the page and is available for Toshiba technicians!

• Satellite Pro C660 - BIOS update error

  Hello

  Try to update one of my employees with bios 1.50 laptops (C660) and it displays an error message displaying 3 possible causes. Power adapter not connected not (it's) battery is less than 10% (it is not) and the BIOS is updated to the version 1.50. When I tried the update the laptop was running 1.00. So I updated the bios to 1.30 with no problems, but when you try to update to 1.50 it still shows the error.

  Any ideas? You will need to get the bios installed as seems to solve problems hitting the phone suffers from.

  Thank you

  Hey Buddy,

  What operating system is currently installed?

  BIOS update it of necessary this value-added package is installed and you run the update as an administrator. Also, make sure that the battery is fully charged.

  What is the model number of the C660?

• Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access

  Hello

  My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.
  I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.
  Is that someone can help me?

  Best regards

  Hello

  I was wondering what crisis recovery disk you have?  :|
  In my experience the special drive is required, which is available only for ASP technician
  That's why it of necessary to contact the ASP in your country to reflash BIOS.

  In my opinion you shouldn't t try recovery disks of the crisis who loves you in the net, it can drive to the mobo damage

• Satellite Pro A300 - should it BIOS for Intel virtualization technology?

  Hi all.

  Any Satellite Pro A300 has BIOS option to enable or disable the Intel virtualization technology?
  It is mentioned on this page: http://www.toshiba-europe.com/easyguard2008/EN/manageability.aspx

  I have A300-01:00 (regular Satellite, not Pro), but its T5850 has not VT is supported, so there is no option in the BIOS. Wonder what is the difference between Satellite and Satellite Pro BIOS and can I try to use Satellite Pro A300 BIOS for my A300-01:00. Of course, I'm afraid I can't :(

  Thank you, Andy

  Hello Andy

  As far as I know the BIOS is not a universal startup program and is suitable for specific hardware architecture. Because of this Toshiba doesn t offer a BIOS for several models of laptops.

  If your laptop doesn't have virtualization option then there is nothing to do. Updating the BIOS will not help any.

• Update BIOS 1.60 to 1.70 on Satellite Pro A300

  Satellite Pro A300 obtained new infromation of Toshiba Tempro it has news
  BIOS available. I've been bios downloaded and the upgrade of 1.60 to 1.70. The problem are
  This machine will completely average JAM of the bios upgrade. Show InsydeFlash bios updated
  will "Erase and write", but nothing happened. The machine is totally JAM!

  What can I do now? I have power on machine and not yet rebooted from power button because
  I am fraid that update of the bios is not yet ready.

  PLEASE HELP ASAP!

  Hello

  Please contact the nearest authorized maintainer and ask for help.
  If the BIOS update does not do well the BIOS chip can be damaged and notebook will be dead.
  Contact them and explain the situation. They will help you.

  By the way: what do you mean with jam? Laptop goes OFF in the middle of the update of the BIOS?
  Did you turn off?

  What is happening exactly?

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Satellite Pro A300-1DZ cannot find HDD after BIOS update

  Hello world

  I recently bought a Satellite Pro A300-1DZ flea market.
  Put a new copy of Windows xp family.
  I then install all the drivers necessary own site of Toshiba and the end of it, I thought that it is perhaps a good idea to update the bios?

  OH DEAR what a big mistake.

  Now the netbook won't start windows.
  So I thought it's ok, I'll just start from the begginning and reinstall windows again, but he tells me that it cannot find a hard drive on my netbook?

  aaaaaaaaaaaaaaahhhhhhhhhhhhhhh, I'm going crazy,
  Could someone tell me please how to fix this? Thanks x

  Hello

  I think the value of the option SATA AHCI and hence Windows XP mode cannot find the HARD drive.
  It's because of the SATA controller.
  You can set the SATA AHCI compatible mode mode mode and this will allow you to install Win XP on the laptop without the use of SATA drivers.

  So, you have two options if you want to install Win XP:

  -> AHCI mode, but you must include the SATA drivers
  Compatible mode-> Win XP installation possible without SATA drivers

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye