Satellite Pro A300 - can't get sound to work

Similar Questions

• Satellite Pro P200 - can't get sound to work

  Hi, since I've had this laptop I could not get the sound to work. Tried to turn the volume and the ESC key and the main volume control looks perfect. Any ideas would be very appreciated.
  Thank you very much!

  Do you mean that you are not able to get the sound to work? You have yellow exclamation marks in Device Manager?
  Make sure you have his most recent driver for your laptop. Check the Toshiba site for an update:

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite Pro A300 - can I get a new recovery disk?

  Hi people

  I want to do a clean install on my Satellite Pro A300 laptop, but the only thing is I can't find my recovery disc I made. When I did everything first he is there anywhere I can get a new one?
  I checked the section drivers but nothing is there

  Thank you
  ADE

  Hello

  If you have always installed the Vista version that was bundled with the laptop, you can create a new disc of recovery again.
  Just launch the Toshiba recovery disc creator and create a new one that s all the!

  In addition, you can reinstall Vista if you use HARD drive recovery option. Therefore, you need to go into the advanced boot menu (F8) and select Repair my computer. Some files are loaded and then you can choose the Toshiba Recovery option.
  But this is only possible on the preinstalled Vista version.

  In the worst cases, to order a new drive Toshiba Recovery directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite Pro A300 - how to get the sound on the TV with VGA cable?

  Hello world

  I have a real problem connecting my Satellite Pro A300 to my Samsung HDTV.
  The video works fine - I used a VGA connection on the laptop and the TV.

  The problem I have is healthy.
  I want the sound either also come from the TV. I tried a jack of 3.5 m from the headphone jack of the laptop to a red and white connection RCA audio on the TV, but it doesn't seem to work.

  Does anyone have any ideas or advice?
  I need of additional drivers, etc., or do some settings need to be changed etc etc.

  Hello

  Normally, to use the 3.5 mm jack plug in the headphones, you need an adapter cable.
  At one end, it has a 3.5 mm jack and the other side to connect red and white audio RCA connections.
  Here is an example of what I mean:
  http://www.optimization-world.com/IMG/prod/3_5_mm_rca_audio.jpg

  I m using such an adapter without any problem. You n t need an additional driver, or something more. It's the same as if you were using a helmet. :)

• Satellite Pro A300 can not find USB devices

  Hello forum,.

  We have a customer who bought a Toshiba Satellite Pro A300 with us, but he gets a strange mistake about it.
  It connects to a hub 5port Sandberg USB 2.0 to one of the usb ports, the pc detects the hub, but when it connects a /Memory stick to the hub, nothing happens.
  the hub and the memory stick works on other PCs.

  I hope someone can help.

  Best regards

  John Bork
  DANBIT A/S

  Hello

  What happens if you connect the memory stick directly without this USB hub?
  I also had a USB hub, but these hubs are a little complicated and delicate USB specification allows a certain power and according to the devices that connect, you need to use an active USB hub, that means with external power supply.

  But normally, Satellite Pro A300 should have enough USB ports if it of needed, I would recommend a USB hub with 2 or 3 maximum ports

• On Satellite Pro A300-10 q keyboard does not work

  I have a Satellite Pro A300-10 q under XP.

  The function keys were not working so I downloaded the common Module and Hot Key Utility.
  After that the touch pad mouse and keyboard no longer works as well.

  Help, please?

  You can use keyboard in the BIOS (arrows) or when you start the operating system in safe mode?
  Which version WXP have you installed (SP?)?

  After please s part number for laptop (PAxxxx-xxxxxx)?

  I have Satellite A300-1LI with WXP and everything works perfectly.

• Re: Satellite Pro A200: can I get the drivers of preinstallation discs?

  I have Toshiba Satellite Pro A200 (PSAE1E) with XP Pro.

  I made a mistake and tried to update the Realtek audio drivers, knit drivers, but does not show the Realtek HD Audio Control Panel to the top, not in the system tray, or in the Control Panel folder.
  I contacted Realtek, they gave me a program that analyzed my HW and then they said that my phone is not supported, I must ask the crazy drivers my manufacturer, laptops, Toshiba.

  I tried the drivers that were running [Toshiba - download drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] page, but those who did not work either.

  So, there is one thing I can do, if it is possible, how can I get drivers of Toshiba recovery disks, without having to reinstall everything again?

  Something like this is not possible. Recovery image is somehow the package, you can not only pilots.
  Have you tried to roll back the OS (System Restore) before you did this updates?

• Satellite Pro U400-15I - wheel of sound not working after installing Windows 7

  The wheel of sound on my Satellite Pro U400 - 15l does nothing after the clean install of Windows 7 to XP pro.
  I used the recommended software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - but not under the control of the wheel! The Toshiba power control is not here, but this isn't a problem.

  Any suggestion is welcome.
  Bob Sheppard

  Hello

  Have you tried to update the audio driver of your laptop? You can check from Toshiba Web site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You may notice any yellow exclamation mark in Device Manager?

• Satellite Pro P300-1EC - cannot get wireless to work

  Hello!

  First of all. Excuse me for my English!

  TEC Spec.

  Toshiba Satellite Pro P300-1EC
  Intel WiFi Link 5100
  Windows XP Pro SP3

  I have a big problem. I can't get the wireless LAN working properly.
  And the customer has purchased this computer because his old computer stopped working with WLAN...

  I tried everything I can. And I am a person of educated tech, so I think I should have the knowledge of this, but I do not have.

  Short version.

  1. install the latest drivers. (Also tried more aged)
  2 restart the computer.
  3 WNIC takes about 10 min to find WLAN.
  4. While working perfect with 130Mbps on project N.
  5.i can user logout and change and all.
  6. when I restart I'm back at number 3.

  Long version:

  I installed XP pro since the XP downgrade Cd included and wireless drivers wasn't on that CD so I downloaded them. (And Yes. "This is the correct drivers.)
  After that I installed the driver and restart my computer, I could not find wireless networks. Kind of weird because I have 4 routers/points of WLAN on my company with the range 60-100% and about 3 other public routers without security. I tried to update the drivers to windows update, and WU has found an update for me. I installed driver and the wireless highlight function. I scream YES and restart the computer. Then it stopped working. N° !!!
  I was a little tired on the problem and began installing some other computers that I bought and when I looked the Toshiba computer that I saw that it was connected to my WLAN. Weird, but I thought it worked then I restart the computer again and then his does not work... again! Now, I have analyzedthe problem and it's like that.

  When I start the computer the my WNIC does not any WLAN.
  About 10 min (10m32s) after starting the wireless started working.
  I am able to disconnect and change the user and it still works, but as soon as I restart the computer it stops and I have to wait another 10 minutes. And so on.

  Anyone been trough something like this even if it is not not toshiba or my model?

  Hello

  What is the Satellite Pro P300 - 1EC BIOS is up-to-date?
  Please check everything first.

  You said you are using Draft N did you tried to establish the WiFi connection using other standard WLan as 802.11 A or G?

  I also recommend changing the WiFi channel and try other channels.

  In addition, you can change a WLan option that affects the WLan functionality. You can find these settings in the Device Manager-> card WLan-> properties-> Advanced tab

  Good bye

• Satellite Pro A300 - can I add a second HDD?

  Hi Forums,

  I have an A300 PSAGDA-02000R and was wondering if it is possible to add a second HDD to it. After I removed the Panel to inspect where the second HDD going, I discovered that there is no connector, so I was wondering if you bought or have Toshiba install a second series of connectors?

  any response would be great

  Thank you F1R3F1GHT

  Hello

  > where will the second HDD, I discovered that there can be no connector
  That means that you can add a second HDD. That's fact!

  The fact is that all the A300 models using the same case but if you can connect a second HDD it according to the motherboard. This connector is attached to this topic and you can therefore add one such connector.

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• Tecra S1 - can't get sound to work after a new installation

  Hello

  I have a Tecra S1 and the reformat. Did not have the original driver CD.

  All right, the drivers installed from the Web from Toshiba website. SoundMAX driver for sound. But I don't know that I hear some reverb when the music plays. VERY annoying.
  I think that a sound environment "Preset" must be turned on, but I've looked EVERYWHERE and can't find how to enter or adjust any environment sound presets.

  HELP PLEASE!

  Any help appreciated.

  Pete

  Good work, buddy! :)

  How did you solve this problem?

• Can not get sound to work since the reload of Windows Vista

  Original title: my computer crasheds had to reload Windows Vista. dowloadeds the disk windows drivers. still no sound. all say sound card diagnostics works

  my computer crashed. HADS reloads of windows Vista. I downloaded the audio driver of windows disk, still no sound. all say sound card diagnostics works

  Try to download the drivers on the support site for your computer manufacturer. You will need to provide the model number of your computer.

• Satellite Pro A300 - for Windows 7 power management strategy

  Hi all

  I have the following on my Satellite Pro A300 problem:

  My laptop fan works continuously, which means almost always turn. I cleaned the entire cooling with compressed air, so it is not clean, no problem with that. The reason is that in browsers when Adobe Flash Player runs, it loads the CPU and the GPU, so that the fan trying to cool the system.

  Now I ask you, is there any solution to fix this? I mean even to reduce the GPU clock speed when I do not use the graphics intensive applications.

  I use Google Chrome as default browser and the Windows 7 OS 32 bit.

  Thank you in advance.

  Hey Buddy,

  If an application load the CPU and the GPU it s normal behavior that the fan rotates and probably on top level so it s high usage. So don t you worry because everything is normal. The fan protects the equipment from overheating.

  What you can do is updated Google Chrome and Flash Player. Also try to use the most recent version, they also contain security updates.

  Last but not least, you can change the cooling method in the power management Windows (change the power plan settings). If you have installed Toshiba Value added Package, you can choose between optimized battery and a maximum Performance. Select optimized battery and fan activity will be less.

• Satellite Pro A300-1E7 - cannot start the cam software

  I bought the Satellite Pro A300-1E7.
  Webcam does not work in MSN messenger video call.
  Will have problems similar to the previous posting, except that I use Zonealarm.

  I think that Zonealarm has disputed cec_main.exe in a similar way.
  I tried to follow the instructions here, but without much success.
  I removed the Camera Assistant SOftware and re-installed the driver but does not seem to have improved things.
  Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.

  Any ideas please?

  Hello

  I used the Zonealarm happened and I was not really satisfied, because this software locked everything and most of the applications didn't work properly even after the new configuration! Finally, I removed this software and I noticed more advantage. my laptop starts much faster!
  I think this software would lock the cam software too.

  > Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.
  This means that the software has been removed and is not installed correctly.
  But to be sure, check in Control Panel-> Software (Add & Remove Programs) if the webcam is installed.

  I have the internal cam of Chicony too and it s works well as part of the software Skype. I didn't test t MSN but I don t see serious reasons why it shouldn't t work.

  In my view, you must first remove the zonealarm. Then clean the OS using CCleaner. Finally, redownload the webcam software and reinstall it!

  The toolbar of the webcam is not always visible on the desktop.
  It seems that if you move it the mouse cursor to the place where the webcam tool bar was hidden.