Satellite Pro A300 - error - webcam driver open failed

Similar Questions

• Satellite Pro A300-1NH - Webcam driver open fail

  Tried to work with my camera, but the error appeared "Webcam driver open fail. "Please restart camera or computer" tried to do both, nothing happened. Drivers modified for camera, the same problem.

  My OS is Windows XP SP3. Can someone help me?

  HI rinat_1,

  Your Satellite A300 has been bundled with Windows XP? If not, try it with settings of factors once again, please!

  Also make sure that your BIOS version is the most recent and you can get it here:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

  Good luck! :)

• Satellite A300 - error: "webcam driver open fail.

  Hello

  I have a Toshiba Satellite A300-1SM computers upgrade to Windows 7 (32-bit), and since yesterday, the webcam gives me problems. Does not work.
  Is a Chicony Webcam, built inside the computer. Has suddenly stopped working. The following error message appears: "webcam driver open fail. Please restart camera or system. "
  I have not touched or anything installed. It happened the day after.

  I tried to restore the computer to an earlier date and it worked for a few minutes... but it failed again and pops up the same error.

  I wonder what I have to do to return to 'recover' my webcam.

  Thanks in advance.

  Greetings

  Hey,.

  There is a lot of discussion here in the forum about webcam driver problem, and you should read those discussions:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=233048𸹘
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=232084𸪔
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=233417𸿉

  Problem is that I can t say more about it because the error never happened the same I use my webcam often enough but no problem at all. :)

  Anyway, if you have other questions you can post again ;)

• Satellite A300 - constant "Webcam Driver Open Fail' error

  I have searched and looked for solutions to this problem and feel like I've tried everything. Whenever I turn on my laptop or try to start my webcam I get the error "Webcam driver open fail." Please restart camera or computer. »

  I used to be able to use the webcam with no problems, but it just stopped one day of work. I recently reformatted my drive to operate the State out-of-the-box, but it always shows an error whenever I try to use my webcam. I am running Windows Vista Home Premium on an A300 model: PSA - GCA. I also tried updating the driver for the webcam (and the last update of the BIOS) section of the support from Toshiba, but without success. I also tried to use the webcam XP driver, but still no luck.

  Any idea on how to solve this problem?

  Post edited by: Replicant

  I also forgot to mention that in my device manager, I don't see my Chicony Webcam at all. There is no section for current imaging devices at all.

  Hello

  If you're looking for here in the forum you will find a sufficient number of threads on this problem but I founded a thread interesting with good detachment of user Akuma and mayb s useful for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  If it doesn t work I think you need assistance from an authorized service provider. Technicians can check your laptop and fix it if necessary s.

  Good luck!

• Satellite A300-1EH - Webcam driver open fail

  After the disk format (recovery disc HARD T, Vista 32 b) there is no aplication «toshiba face recognition»
  After installation of Camera Assistant Software, it has that error: Webcam driver open fail. Please restart camera or computer.
  Camera is off and I can't turn it on, by restarting the computer gives no effect.

  Could someone help me?

  Hello

  I see you are using Vista
  Well, first you must make sure that Vista is up-to-date!
  You used the recovery and that means that Vista needs to be updated to the latest state!
  All the service packs and other patches must be installed.

  Then remove the software of the webcam of the system, clean the base registry (CCleaner, etc.) and after reboot again trying to reinstall the webcam software

• Satellite A300-1EI - Webcam driver open fail

  Some time ago I bought A300 and everything was working fine until one day I tried to launch the camera Assistance software and this msg came "Webcam driver open fail. Please restart camera or computer. »

  I didn't know what to do so I decided to uninstall the software and install it again, but to no avail.
  Since then, when I try to run my cam even on msn it works but it all black wrath after awhile.

  Help, please

  Is as black when you start the software help the camera?
  MSN is not the best app for the diagnosis?

  Have you tried to play with the settings and the night mode option?
  Did you remove protect sheet in front of cam?

• Impossible to restart webcam error: Webcam Driver open fail. Please restart camera or computer.

  Webcam driver open failed. Please restart camera or computer.

  When I try to activate my webcam my on my laptop a window comes up saying "Webcam Driver open fail." Please restart camera or computer. "I restarted my computer. I don't know how to restart my camra. Help, please. Thank you

  Hi Joe627,

  ·        Is the webcam built into the computer, or you are trying to connect it via USB?

  ·        What is the number and model of the webcam?

  ·        You have installed the drivers for the webcam?

  Uninstall the web cam program and features and reinstall it back you can reinstall from the CD provided by the manufacturer or the manufacturer's Web site. Steps to uninstall the program and features:

  a. click on start
  b. Select Control Panel
  c. choose the program and features
  d. Select the Webcam program and uninstall.

  Link, you can see:Uninstall or change a program: http://windows.microsoft.com/en-us/windows-vista/Uninstall-or-change-a-program

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Re: Satellite A300 (PSAJ4E) - Webcam driver open fail

  I had to replace the hard drive on my PSAJ4E of the A300 and when I reloaded Vista 32 and install all drivers hardware Toshiba everything went well except for a Chicony webcam.

  The side menu is there but it won't work, giving a "driver webcam open fail." "Please restart camera or computer" error.

  I updated the Bios to 4.20
  I first used the original Toshiba, the 20080428125023 webcam driver download (V1.07.175).
  I tried with 'closed the cover 3/4 '.
  I have searched and read dozens of similar problems. I've tried a few, even edit the ini setting. Nothing helps.
  I even tried drivers XP (V1.7.144.0611), 32-bit and 64-bit versions and even a driver from the gateway. Nothing seems to work for this cam.

  What now?

  I also now get "the requested section is not found in the INF file" when I try to uninstall and reinstall the driver through Device Manager.
  I have the choice of
  6.198.1.0
  6.2.208.424
  6.2.238.1217
  all give the same error...

  Hey,.

  There is already a thread on Satellite A300 and webcam driver which could be useful for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59662

  Check this box!
  ?

• Satellite A300-276 - Webcam driver open fail

  Hello!

  I need someone to help me.

  I have a Toshiba Satellite A300-276 with integrated webcam.
  The operating system that came when it was purchased windows vista, but lately for some reasons, had to format and then took the time to install win 7 (32-bit).

  But the webcam is not working.
  The program, readers and does not work.
  When I click on to connect to the web a warning appears saying + "driver Open Webcam fail." Restart camera or computer + «...»
  I rebooted, uninstalled and went back to install and does not work!

  Does anyone have an idea how to solve this problem?

  Thank you.

  Hello

  It is a typical software problem
  I read a lot of discussion on this error message and in most cases, new installation/update driver does the job!

  Please ensure that you use the latest version of the BIOS.
  Go to the Device Manager, then go to imaging devices.
  You can find the USB video device it's plays.

  This remove from the Device Manager list. Alternatively, you can uninstall the driver
  Restart the device, and then try to install the driver again

  Please make sure you use the latest webcam software... you can choose the published software for Satellite L500 too!

• Satellite A300-1MC - Webcam driver open fail - Vista

  "Driver Webcam open fail." My webcam has a month back. Have been in forums & took advice - nothing works.
  Cleaned disc and reloaded several times pilot. This is not satisfactory.
  Someone has to take RESPONSIBILITY.

  I need to know the CAUSE and a solution.

  Hello John, and welcome to the forum of Toshiba.
  Let us discuss responsibility a little later.

  Tell us first what model of laptop you have exactly, which operating system do you use and what have you tried to solve this problem.

• Satellite Pro U400 - error Webcam driver

  Whenever I boot, I get an error message saying that there is a problem with the driver for web cam - words in this sense.
  How can I reinstall these drivers?

  Hello

  First of all, you need to remove the webcam of windows operating system software.
  You can do this in Control Panel-> software
  You have to find Chicony webcam software.
  Remove it, reboot the system, then clean it using CCleaner (freetool).
  After reboot again install the webcam software again once you have downloaded from the driver page.

  Good bye

• Satellite L305-S5945 - Webcam driver open fail

  I have a Satellite L305-S5945 and the webcam worked perfectly out of the box, and after that I have re-installed Vista-64 (which he came with) after that I installed a bad program and had a blue screen.

  I have recently upgraded to Windows 7 and now the webcam is not working and I get the error "Webcam driver open fail." Please restart camera or computer. "I tried to find a Windows 7 driver on the support page, but I couldn't find one so I just used both Vista/XP those instead. One is the driver and another the Camera Assistant Software. Here's what I've tried so far:

  * Attempt #1 * freshly installed Windows 7. Without having to install anything else, I download the two aforementioned drivers and then install both and restart the computer. Meet up with working Camera Assistant Software but when you start webcam I get error "Webcam driver open fail. Please restart camera or computer. »

  Try to #2 * after 1 attempt, go to Device Manager and uninstall Chicony USB Camera 2.0 under imaging devices. Restart the computer and let it sit. Finally Windows takes the camera and auto installs and it reappears in the Device Manager. Still get the same errors.

  * The #3 attempt * freshly installed Windows 7. Uninstall the camera in Device Manager, and then install the two drivers. Get the same errors. Restart the computer and still the same error.

  Help! How can I fix my webcam?

  Try to install the driver for cam Win7 to another model of laptop A300 or A500.
  I'm sure that it works well.

• A satellite - Webcam driver open failed

  "Webcan driver open fail. "Please restart camera or computer"-this error message appears when I try to open or to use my integrated webcam.
  I am running windows vista.

  The webcam worked fine for the last 12 months.
  I tried to reinstall the driver software.
  By doing a system restore and nothing seems to work.

  Someone has ideas/solutions

  Hey Buddy,

  What Satellite notebook you have exactly?

  Have you already read other similar topics? Here in the forum, you can find a lot of information on this error webcam driver open fail. In most cases, a Toshiba Recovery disk recovery facility can help get rid me of this. :)

• Satellite L300-110 - Webcam driver open fail

  Helloe everyone,

  I have the Satellite L300-110, and I have a problem with the webcam after installing Windows7.

  The error:
  Webcam driver open fail. Please restart camera or computer.

  The camera works fine and appear in Device Manager as Chicony USB 2.0 Camera.

  However, I can use the face recognition.

  Anyone know the cause.

  Hey Buddy,

  Did you check the forum for similar discussions/problems? It doesn t seem so because you will find enough referred to this problem.
  Then use the forum search and read similar topics.

  In any case, you should try to update the driver for the webcam and the BIOS. Both can be downloaded from the Toshiba page.

• Satellite L300 - problem WebCam: WebCam driver open fail

  Driver Webcam installed (webcam - 20080519191643.zip)
  If the PC charge error: "WebCam driver open fail. Please restart camera or computer.

  http://photoFile.ru/users/romikok/135126109/137170363/
  http://photoFile.ru/users/romikok/135126109/137170362/

  What can I do?

  HELP, please)

  Hello

  I see that you have installed Microsoft messenger and ICQ on your system.
  Try disabling these two applications before you start the webcam.

  If it does not help to remove the installed webcam software, restart the computer and reinstall it again.
  But let the two applications (MS messenger, ISQ) disabled during the installation of the webcam driver.

  By the way; Keep you Win XP OS always up-to-date! Sometimes the MS patches or fixes are needed to run these free peripheral trouble,