Satellite Pro A300-guest 1GT - error message when starting webcam

Similar Questions

• Satellite Pro A300-1NT (Satellite Pro A300-guest 1gt)--deuxieme hard drive)

  Hi all

  Is eligible for a Satellite Pro A300-1NT (or Satellite Pro A300-guest 1GT) to add a second hard drive?

  Thank you

  Peter

  Hmm. as much as I know that you can not use a second HDD in this notebook.
  There could be a second HARD-drive Bay, but that does not mean that the use of the second HARD disk would be possible.

  What you need to know is that the A300 series was equipped with different motherboards and not all mobos provides a second HARD drive controller.
  If you want you could remove the fixed the second HARD drive Bay and could check if the connectors are available.

  If it isn't then impossible to connect and use the second HDD.

  Good bye

• Is Satellite Pro A300-guest 1GT always distribution and available?

  Still, they distribute this model?
  I can not find and I really want to buy it.

  Can anyone give me some info like where could I make a request for one or whatever it is, who should I contact for...
  This laptop in my opinion has the best quality-price ratio. Thanks in advance for your help.

  Mihai

  Hello

  I checked the site Web of Toshiba and the Satellite Pro A300-guest 1GT is always available:
  http://EU.computers.Toshiba-Europe.com/innovation/product/Satellite-Pro-A300-1gt/1056706/#0

  I put t know where you life, but you go to an authorized service provider. Normally they also sell Toshiba laptops, as far as I know and if the model is available you can buy it here.

  Welcome them

• Satellite Pro A300-guest 1GT random freezes

  Hello, I have an A300-guest 1GT (running windows 7) for a few years now and just recently, that it started to freeze. It happens randomly and everything crashes (can't move the mouse, the keyboard does not work) only option is to press and hold the power button and stop it. What tends to happen more often when the day before, or when I do less intensive tasks (writing documents surfing).

  When it crashes the same Viewer displays only the 41 events (which is the closing force).

  I did tests of memory with memtest and windows +. A slot has a few errors and I took it, but the system still crashes. Also, I did a full format and reinstalled the update windows 7, all the drivers on the toshiba site and it still crashes. I have the speed of the fan installed to check the warm-ups, but everything is less than 40.

  Safe mode works perfectly.

  Hello

  It seems that the high temperature cannot be the problem here, but it s interesting that your memory seems to produce errors
  If its only a problem of memory, then new module to solve this problem, but it would also be possible that the location on the motherboard is affected
  In this case the motherboard needs to be replaced

  By the way: would be interesting to know if the laptop would be still freezes with new operating system preinstalled theoretically system problems could cause this gel too.

• Satellite Pro A300-guest 1GT - cleaning of cooling system

  I can't find any Toshiba Satellite Pro Web site service manuals.

  The problem is that the computer becomes warm during use, the cooler works on the top speed, I'm usually solve these problems by cleaning the cooling system. HP Compaq have service manuals where all wrote - what and how open, how to clean and what screwdriver to use.

  So there are available on the Web site Toshibas maintenance manuals?

  Hello

  These service manuals are not downloadable for ordinary users of my knowledge.
  Just a Toshiba authorized service partner could download this.

  However, if you want to clean the cooling modules, then I recommend using a jet of compressed air. In my case, it always helps.

  Also check this:
  + How to clean a Toshiba laptop cooling system +.
  http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

• Satellite Pro A300 - How can I turn on my webcam?

  Satellite Pro A300 - How can I turn on my webcam? Operating windows 7. The computer is clean.

  Hello

  The webcam can be used with programs like Skype communication where you can make a video call. Of course, there are other messengers or programs they use the webcam.

  But you must install the software/driver webcam that you can use. This software can be downloaded from the official website of Toshiba (Camera Assistant Software):
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite Pro A300-28V - my bluescreens disappeared when the BIOS has been upgraded

  I'm curious to know about it. The machine is a Satellite Pro A300-28V with Vista32/Win7.
  Had problems with bluescreen dumps referring to 'iaStor.sys '. I was about to send the laptop in for repair when I made this last effort to resolve the problem. Upgrade 1.9 to 2 BIOS, 1 - Win.

  All of a sudden my system image succeeded! Even at an Iomega home network HDD. Without complex!
  No blue screen exports even at startup 'cold' (after a free night)!

  For now, I leave the computer in sleep mode while I am at work. Let's see if he managed a day without landfills.

  What is the technical difference between 1.9 and 2.1 BIOS? No idea if it's something with iaStor.sys to do?

  /ssstsg

  Spelling was edited by: ssstsg

  Hi mate

  This is really good news as your BSOD displeasured after the BIOS update.
  The BIOS give instructions to the test power - on self test (POST) and provide basic information on how to manage components of the laptop, as HDD, ODD memory, that are required to load the operating system.

  Who knows, what was changed in the update but the main thing is that all the work and the update solve your BSOD

  > No idea if she has something with iaStor.sys to do?
  iaStor.sys is part of the SATA driver who is required to recognize the HARD drive using AHCI mode.

• Satellite Pro A300 - the cursor moves continuously when connected an external mouse

  Hello

  I have a Satellite Pro A300. When I connect a mouse directly by USB the cursor moves constantly. I also have a mouse attached via a docking station, Toshiba and that works perfectly.

  It doesn't matter what USB port I use or if the laptop is connected to the docking station or not, or if it works on AC or on battery power.

  I thought it was the mouse that was the problem, so I went and bought a new one but the problem persists.

  Actually, while I wrote this post, he has stopped doing that and then started! Very frustrating.

  Can anyone help?

  Thank you

  Susib

  Hello

  How about, the touchpad is the slider moves and jumps using the touchpad?
  Try to disable the touchpad while using the USB mouse control if you can notice a difference

  What about BIOS?
  You have the latest version installed?
  Check it!

• Satellite Pro A300: Bluetooth headphones sound decreases when it is connected

  Hello

  I have a pair of headphones Creative SE2300 Bluetooth that I use with my Satellite Pro A300 and its built-in bluetooth.

  They connect well and work as they should (including the A2DP and AVRCP) except that the sound cuts every 20 seconds or more for anything from a fraction of a second for a couple. Abandonment of sound is completely intermittent no apparent reason for it.

  Now earphones Creative also came with a transmitter to connect to any helmet and the connection to it works perfectly with no decline in the sound. I also connected the earphones to my phone and it used to listen to music, and once again the connection is flawless.

  So why the connection to my laptop is so bad?

  I have improved the battery Bluetooth to the last v7.00.16 (T) and my headphones are fully charged.

  Any help will be very appreciated!

  You have any other Bluetooth connections configured for example data synchronization?

• Satellite Pro A300 Watch Blue error screen 8086...

  Hello

  Today, laptop computer produces a Microsoft error message (do not see what it was) and it says to restart the laptop.
  The restart blue screen error message appeared. 0 x 00008086

  Thank you

  Paul

  This BSOD give you a file system as well?

  Google and run 'BlueScreenView' is a free utility that displays BSOD in detail.

• Satellite T110-11U - error message when starting computer

  I have a 6 month old Satellte T110-11U running only a manufacturer installed OS - Windows 7. Whenever I start the computer, I get an error message:
  There is a problem of starting, C:\ users\home\AppData\local\imagusud.dll, the specified module could not be found. Can ignore the prompt, I would like to do the sorting.

  Someone knows how to fix this?

  Hello

  It seems that something is corrupted in your user account.
  Have you tried to repair the operating system or to clean the registry with CCleaner?

  CCleaner is a free tool that cleans up the registry and removes the garbage in the HARD drive.
  Try this.

  Otherwise, you can check the msconfig-> Startup tab.
  You should look for some entries containing the imagusud.dll file and may disable or remove this

  Good luck

• Receive error message when starting Photoshop CS3

  I get the following when starting CS3 error message:

  "This application has failed to start because CML4.dll was not found."

  The title of the window is, "Photoshop.exe - impossible to locate item.

  Of course, the only button to push is the 'OK' button (which should probably read - something f - d upwards.) Press here to continue.) After pressing the OK button, CS3 starts and works without problem - until now.  I guess that I have not actually used the part of the program that uses CML4.dll or do not see the difference with or without it.

  How can I solve this problem - without having to reinstall PSCS3? and why is it in the first place?

  CML4.dll is not part of Photoshop.

  It could be a driver of printer or scanner driver DLL, or perhaps by a third party plugin.

• 10: Help, error message when starting the

  Hey guys,.

  I have a toshiba with windows XP Home Edition a10.
  whenever I try to start the computer, I get an error that reads:

  A disk read error occurred
  Press Ctrl + Alt + Delete to restart

  No matter what I do, I can't go in front of her. Ive had this error before and I solved it by pressing f12 at startup and selecting the option farthest away (to the right of the network)

  now im just stuck, if there is a way I can get past without having to reformat my hard drive, it would be great because I have a lot of useful stuff out there.

  Thank you very much

  Jordan

  Hello

  Sounds strange! As a first step, you should try to back up your data with a floppy Boot or Boot CD (www.bootdisk.info).

  Then you should try to sett your BIOS back to default settings.
  Next step is to try to find your laptop! If there is an error message that your HARD drive is damaged!

  Go to https://eu.computers.toshiba-europe.com - Support & downloads - find an authorized Service partner!

  Goodbye Chris

• Error message when starting. C:\WINDOWS\system32\gijsgkuj.DLL specified module could not be found.

  This error message has appeared for some time now, but it does not seem to harm my pc, other than very slowly.  What is the feature of this module?  Do I need for normal use?

  johnedr1,
  You can check that you spelled the file correctly?  I wasn't able to find that everything about this DLL.  If you have any specialized software it can be part of that.  But something during startup tries to call this file and find do not.
  You can make troubleshooting by performing a clean boot.  Here are the links that will explain the process in detail.  Short of this, you disable the elements of all Microsoft and if the error Stops, then add points back until you find the program\process which is the cause.

  Follow the steps in this article to resolve problems with a clean boot.

  http://support.Microsoft.com/kb/310353

  Boot advanced troubleshooting: http://support.microsoft.com/kb/316434

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro L300D-20R: displays error 0xc000000f when recovered

  Hello

  I wonder if someone can help me. There are accidents of software in my laptop. I tried to restore my laptop to factory setting, but failed.

  Here's what I did: under the opening of proceedings (F12) to drive recovery HARD, I entered "repair your computer" and then computer show the error 0xc000000f. It came at the very end when I 'C' boot from CD/DVD with windows Vista recovery.

  Any help appreciated,
  Thanks in advance,

  Adam

  Hello

  As far as I know, you have to press F8 to start the HARD drive recovery process.
  Then a new menu will appear where you can choose repair my computer.
  Then, you choose the HARD drive recovery.

  If this is not possible, that it would mean that there is something wrong with the HARD drive or the partition that contains the files / image of HARD drive recovery.
  This might explain why the boot from the CD/DVD drive is not possible.

  Conversely a failure of RAM could be the reason too.
  That's why it of needed to check if these parts.

  By the way; are you able to boot from an another disc bootable Win XP or Linux live CD?